Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Richmond Dale had a population of 308 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Richmond Dale, with the one closest to Richmond Dale listed first.
- Higby
(2 miles [3.2 km] to the west)
- Note: The GPS coordinates that we are using for Higby have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Higby
- Higby is located in Ross County
- Vigo
(3 miles [4.8 km] to the north)
- Note: The GPS coordinates that we are using for Vigo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vigo
- Vigo is located in Ross County
- Schooley
(5 miles [8 km] to the northwest)
- Antonis
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Antonis have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Antonis
- Antonis is located in Ross County
- Omega
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Omega have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Omega
- Omega is located in Pike County
- Limerick
(6 miles [9.7 km] to the southeast)
- Three Locks
(6 miles [9.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Three Locks have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Three Locks
- Three Locks is located in Ross County
- Cars Run ‑ Historic
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Cars Run have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cars Run
- Cars Run is located in Pike County
- Linn
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Linn have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linn
- Linn is located in Pike County
- Cox ‑ Historic
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Cox have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cox
- Cox is located in Vinton County
- Leo
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Leo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leo
- Leo is located in Jackson County
- Bee ‑ Historic
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Bee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bee
- Bee is located in Vinton County
- Ratcliffburg
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Ratcliffburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ratcliffburg
- Ratcliffburg is located in Vinton County
- Alma
(8 miles [12.9 km] to the west)
- Byer
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Byer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Byer
- Byer is located in Jackson County
- Waverly
(10 miles [16.1 km] to the southwest)
- Glen Jean
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Glen Jean have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glen Jean
- Glen Jean is located in Pike County
- Eagle Mills
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Eagle Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eagle Mills
- Eagle Mills is located in Vinton County
- Tucson
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Tucson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tucson
- Tucson is located in Ross County
- Givens
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Givens have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Givens
- Givens is located in Pike County
- Robbins ‑ Historic
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Robbins have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Robbins
- Robbins is located in Pike County
- Beaver
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for Beaver have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaver
- Beaver is located in Pike County
- Population from the 2020 Census: 429 people
- Jump to TripAdvisor's Tourism page for Beaver <3>
- Richland
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Richland. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Richland
- Richland is located in Vinton County
- Google driving directions:
- From your current location to Richland
- From Richmond Dale to Richland
- Glade
(12 miles [19.3 km] to the south)
- Coalton
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Coalton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Coalton
- Coalton is located in Jackson County
- Population from the 2020 Census: 473 people
- Allensville
(12 miles [19.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Allensville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Allensville
- Allensville is located in Vinton County
- Chillicothe
(12 miles [19.3 km] to the northwest)
- Denver
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Denver have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Denver
- Denver is located in Ross County
Off-the-Road Links ...
The official website for Ross County: www.co.ross.oh.us/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Richmond Dale, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |