RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Putnam County >> Rice >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Rice (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Rice. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Rice is located in Putnam County.

To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Putnam County: Allen, Defiance, Hancock, Henry, Paulding, Van Wert & Wood.

Below are the counties that are near Rice. For each of these counties, we show a sample of those communities that are closest to Rice:

  • Putnam County     (The home county of Rice)
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Continental
      (3 miles [4.8 km] to the south)
      • Note: The GPS coordinates that we are using for Continental have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Continental
      • Continental is located in Putnam County
      • Population from the 2020 Census: 1,085 people
      • Jump to TripAdvisor's Tourism page for Continental <2>
    • Hartsburg
      (4 miles [6.4 km] to the south)
      • Jump to our Gazetteer entry for Hartsburg
      • Hartsburg is located in Putnam County
    • Kieferville
      (5 miles [8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Kieferville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kieferville
      • Kieferville is located in Putnam County
    • Dupont
      (6 miles [9.7 km] to the south)
      • Note: The GPS coordinates that we are using for Dupont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dupont
      • Dupont is located in Putnam County
      • Population from the 2020 Census: 301 people
      • Jump to TripAdvisor's Tourism page for Dupont <2>
    • Miller City
      (9 miles [14.5 km] to the east)
      • Note: The GPS coordinates that we are using for Miller City have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Miller City
      • Miller City is located in Putnam County
      • Population from the 2020 Census: 138 people
      • Jump to TripAdvisor's Tourism page for Miller City <2>
    • Cloverdale
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for Cloverdale
      • Cloverdale is located in Putnam County
      • Population from the 2020 Census: 159 people
    • Kalida
      (12 miles [19.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kalida
      • Kalida is located in Putnam County
      • Population from the 2020 Census: 1,583 people
      • Jump to TripAdvisor's Tourism page for Kalida <2>
    • Glandorf
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Glandorf have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glandorf
      • Glandorf is located in Putnam County
      • Population from the 2020 Census: 1,030 people
      • Jump to TripAdvisor's Tourism page for Glandorf <2>
    • West Leipsic
      (15 miles [24.1 km] to the east)
      • Jump to our Gazetteer entry for West Leipsic
      • West Leipsic is located in Putnam County
      • Population from the 2020 Census: 188 people
    • Ottoville
      (15 miles [24.1 km] to the south)
      • Note: The GPS coordinates that we are using for Ottoville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ottoville
      • Ottoville is located in Putnam County
      • Population from the 2020 Census: 960 people
      • Jump to TripAdvisor's Tourism page for Ottoville <2>
    • Ottawa
      (15 miles [24.1 km] to the southeast)
    • Fort Jennings
      (16 miles [25.7 km] to the south)
      • Note: The GPS coordinates that we are using for Fort Jennings have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Fort Jennings
      • Fort Jennings is located in Putnam County
      • Population from the 2020 Census: 495 people
      • Jump to TripAdvisor's Tourism page for Fort Jennings <2>
  • Allen County
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Delphos
      (21 miles [33.8 km] to the south)
    • Gomer
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Gomer have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gomer
      • Gomer is located in Allen County
      • Jump to TripAdvisor's Tourism page for Gomer <2>
    • Scotts Crossing
      (23 miles [37 km] to the south)
      • Note: The GPS coordinates that we are using for Scotts Crossing have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Scotts Crossing
      • Scotts Crossing is located in Allen County
    • Landeck
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Landeck
      • Landeck is located in Allen County
    • Cairo
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cairo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cairo
      • Cairo is located in Allen County
      • Population from the 2020 Census: 520 people
    • West Cairo
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for West Cairo have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Cairo
      • West Cairo is located in Allen County
    • Elida
      (25 miles [40.2 km] to the south)
      • Note: The GPS coordinates that we are using for Elida have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elida
      • Elida is located in Allen County
      • Population from the 2020 Census: 1,810 people
    • Southworth
      (26 miles [41.8 km] to the south)
      • Jump to our Gazetteer entry for Southworth
      • Southworth is located in Allen County
    • Beaverdam
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaverdam
      • Beaverdam is located in Allen County
      • Population from the 2020 Census: 369 people
      • Jump to TripAdvisor's Tourism page for Beaverdam <2>
    • Bluffton
      (27 miles [43.5 km] to the southeast)
    • Conant
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Conant
      • Conant is located in Allen County
    • Lima
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Lima
      • Lima is located in Allen County
      • Population from the 2020 Census: 36,440 people
      • Jump to TripAdvisor's Tourism page for Lima <2>
  • Defiance County
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Ayersville
      (6 miles [9.7 km] to the north)
      • Jump to our Gazetteer entry for Ayersville
      • Ayersville is located in Defiance County
    • Defiance
      (9 miles [14.5 km] to the north)
    • Williamstown
      (10 miles [16.1 km] to the north)
      • Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamstown
      • Williamstown is located in Defiance County
    • Jewell
      (12 miles [19.3 km] to the north)
      • Jump to our Gazetteer entry for Jewell
      • Jewell is located in Defiance County
    • Sherwood
      (16 miles [25.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sherwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sherwood
      • Sherwood is located in Defiance County
      • Population from the 2020 Census: 803 people
      • Jump to TripAdvisor's Tourism page for Sherwood <2>
    • Ney
      (19 miles [30.6 km] to the northwest)
      • Jump to our Gazetteer entry for Ney
      • Ney is located in Defiance County
      • Population from the 2020 Census: 337 people
      • Jump to TripAdvisor's Tourism page for Ney <2>
    • Hicksville
      (26 miles [41.8 km] to the west)
  • Fulton County
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Archbold
      (25 miles [40.2 km] to the north)
    • Pettisville
      (26 miles [41.8 km] to the north)
      • Jump to our Gazetteer entry for Pettisville
      • Pettisville is located in Fulton County
    • Eckley ‑ Historic
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Eckley have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Eckley
      • Eckley is located in Fulton County
      • Eckley has also been known as:
      • Eckley Station
    • Wauseon
      (28 miles [45.1 km] to the north)
    • Burlington
      (29 miles [46.7 km] to the north)
      • Jump to our Gazetteer entry for Burlington
      • Burlington is located in Fulton County
    • Plattston ‑ Historic
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Plattston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Plattston
      • Plattston is located in Fulton County
  • Hancock County
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Hancock
      (23 miles [37 km] to the east)
      • Note: The GPS coordinates that we are using for Hancock have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hancock
      • Hancock is located in Hancock County
    • Moffitt ‑ Historic
      (24 miles [38.6 km] to the east)
      • Note: The GPS coordinates that we are using for Moffitt have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Moffitt
      • Moffitt is located in Hancock County
    • McComb
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for McComb have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McComb
      • McComb is located in Hancock County
      • Population from the 2020 Census: 1,632 people
      • Jump to TripAdvisor's Tourism page for McComb <2>
    • Lewisburg ‑ Historic
      (27 miles [43.5 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Lewisburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lewisburg
      • Lewisburg is located in Hancock County
    • Benton Ridge
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Benton Ridge have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Benton Ridge
      • Benton Ridge is located in Hancock County
      • Population from the 2020 Census: 289 people
    • Mount Cory
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mount Cory have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Cory
      • Mount Cory is located in Hancock County
      • Population from the 2020 Census: 195 people
    • Rawson
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rawson
      • Rawson is located in Hancock County
      • Population from the 2020 Census: 552 people
      • Jump to TripAdvisor's Tourism page for Rawson <2>
  • Henry County
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • New Bavaria
      (7 miles [11.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for New Bavaria have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Bavaria
      • New Bavaria is located in Henry County
      • Population from the 2020 Census: 93 people
    • Holgate
      (10 miles [16.1 km] to the northeast)
    • Florida
      (12 miles [19.3 km] to the north)
      • Note: The GPS coordinates that we are using for Florida have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Florida
      • Florida is located in Henry County
      • Population from the 2020 Census: 213 people
    • Hamler
      (14 miles [22.5 km] to the east)
    • Okolona
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Okolona
      • Okolona is located in Henry County
      • Okolona has also been known as:
      • Okalona
    • Elery
      (15 miles [24.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Elery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elery
      • Elery is located in Henry County
    • Malinta
      (17 miles [27.4 km] to the northeast)
      • Note: The GPS coordinates that we are using for Malinta have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malinta
      • Malinta is located in Henry County
      • Population from the 2020 Census: 252 people
      • Jump to TripAdvisor's Tourism page for Malinta <2>
    • Napoleon
      (18 miles [29 km] to the northeast)
    • Deshler
      (20 miles [32.2 km] to the east)
    • McClure
      (23 miles [37 km] to the northeast)
      • Note: The GPS coordinates that we are using for McClure have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McClure
      • McClure is located in Henry County
      • Population from the 2020 Census: 678 people
      • Jump to TripAdvisor's Tourism page for McClure <2>
    • Liberty Center
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Liberty Center have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liberty Center
      • Liberty Center is located in Henry County
      • Population from the 2020 Census: 1,123 people
      • Jump to TripAdvisor's Tourism page for Liberty Center <2>
    • Colton
      (27 miles [43.5 km] to the northeast)
      • Jump to our Gazetteer entry for Colton
      • Colton is located in Henry County
  • Paulding County
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Oakwood
      (5 miles [8 km] to the southwest)
      • Jump to our Gazetteer entry for Oakwood
      • Oakwood is located in Paulding County
      • Population from the 2020 Census: 582 people
    • Fort Brown
      (7 miles [11.3 km] to the southwest)
      • Jump to our Gazetteer entry for Fort Brown
      • Fort Brown is located in Paulding County
    • Melrose
      (7 miles [11.3 km] to the southwest)
      • Jump to our Gazetteer entry for Melrose
      • Melrose is located in Paulding County
      • Population from the 2020 Census: 259 people
    • Saint Andrews ‑ Historic
      (7 miles [11.3 km] to the southwest)
      • Note: The GPS coordinates that we are using for Saint Andrews have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Andrews
      • Saint Andrews is located in Paulding County
    • Charloe
      (7 miles [11.3 km] to the west)
      • Jump to our Gazetteer entry for Charloe
      • Charloe is located in Paulding County
    • Murat ‑ Historic
      (8 miles [12.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Murat have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Murat
      • Murat is located in Paulding County
      • Former names for Murat:
      • Hipp's Lock
      • Timberville
    • Junction
      (8 miles [12.9 km] to the west)
      • Jump to our Gazetteer entry for Junction
      • Junction is located in Paulding County
    • Mandale
      (9 miles [14.5 km] to the south)
      • Jump to our Gazetteer entry for Mandale
      • Mandale is located in Paulding County
    • Renollet ‑ Historic
      (12 miles [19.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Renollet have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Renollet
      • Renollet is located in Paulding County
    • Hedges
      (12 miles [19.3 km] to the west)
      • Note: The GPS coordinates that we are using for Hedges have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hedges
      • Hedges is located in Paulding County
    • Grover Hill
      (13 miles [20.9 km] to the southwest)
      • Jump to our Gazetteer entry for Grover Hill
      • Grover Hill is located in Paulding County
      • Population from the 2020 Census: 377 people
    • Broughton
      (13 miles [20.9 km] to the west)
      • Note: The GPS coordinates that we are using for Broughton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Broughton
      • Broughton is located in Paulding County
      • Population from the 2020 Census: 115 people
  • Van Wert County
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Hoaglin
      (17 miles [27.4 km] to the southwest)
      • Jump to our Gazetteer entry for Hoaglin
      • Hoaglin is located in Van Wert County
    • Scott
      (18 miles [29 km] to the southwest)
    • Middle Point
      (21 miles [33.8 km] to the south)
      • Note: The GPS coordinates that we are using for Middle Point have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middle Point
      • Middle Point is located in Van Wert County
      • Population from the 2020 Census: 557 people
      • Jump to TripAdvisor's Tourism page for Middle Point <2>
    • Van Wert
      (24 miles [38.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Van Wert have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Van Wert
      • Van Wert is located in Van Wert County
      • Population from the 2020 Census: 10,614 people
      • Jump to TripAdvisor's Tourism page for Van Wert <2>
    • Venedocia
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Venedocia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Venedocia
      • Venedocia is located in Van Wert County
      • Population from the 2020 Census: 118 people
    • Convoy
      (26 miles [41.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Convoy have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Convoy
      • Convoy is located in Van Wert County
      • Population from the 2020 Census: 1,050 people
      • Jump to TripAdvisor's Tourism page for Convoy <2>
    • Elgin
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Elgin have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elgin
      • Elgin is located in Van Wert County
      • Population from the 2020 Census: 55 people
    • Dixon
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Dixon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dixon
      • Dixon is located in Van Wert County
  • Williams County
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Stryker
      (25 miles [40.2 km] to the north)
    • Bryan
      (25 miles [40.2 km] to the northwest)
      • Jump to our Gazetteer entry for Bryan
      • Bryan is located in Williams County
      • Population from the 2020 Census: 8,212 people
      • Jump to TripAdvisor's Tourism page for Bryan <2>
    • Pulaski
      (27 miles [43.5 km] to the northwest)
      • Jump to our Gazetteer entry for Pulaski
      • Pulaski is located in Williams County
    • Melbern
      (28 miles [45.1 km] to the northwest)
      • Jump to our Gazetteer entry for Melbern
      • Melbern is located in Williams County
    • West Unity
      (30 miles [48.3 km] to the north)
  • Wood County
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Custar
      (25 miles [40.2 km] to the east)
      • Note: The GPS coordinates that we are using for Custar have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Custar
      • Custar is located in Wood County
      • Population from the 2020 Census: 184 people
      • Jump to TripAdvisor's Tourism page for Custar <2>
    • Hoytville
      (26 miles [41.8 km] to the east)
      • Jump to our Gazetteer entry for Hoytville
      • Hoytville is located in Wood County
      • Population from the 2020 Census: 318 people
    • Milton Center
      (26 miles [41.8 km] to the northeast)
      • Jump to our Gazetteer entry for Milton Center
      • Milton Center is located in Wood County
      • Population from the 2020 Census: 146 people
    • Grand Rapids
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Grand Rapids have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grand Rapids
      • Grand Rapids is located in Wood County
      • Population from the 2020 Census: 1,006 people
      • Jump to TripAdvisor's Tourism page for Grand Rapids <2>
    • Weston
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Weston
      • Weston is located in Wood County
      • Population from the 2020 Census: 1,657 people
      • Jump to TripAdvisor's Tourism page for Weston <2>
  • Allen County (IN)
    • The following are listed by their distance from Rice, with the one closest to Rice listed first.
    • Edgerton
      (26 miles [41.8 km] to the west)
      • Jump to our Gazetteer entry for Edgerton
      • Edgerton is located in Allen County (IN)
    • Dixon
      (29 miles [46.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Dixon have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dixon
      • Dixon is located in Allen County (IN)
    • Woodburn
      (29 miles [46.7 km] to the west)

For an expanded list of the communities that are closest to Rice, see our County-by-County Page for Rice.

Newspapers Published in Rice ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 94 newspapers that have been published in the area around Rice.

Although we're unaware of any newspapers that were published in the immediate area of Rice, there are papers which were published within 24 miles [38.6 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Rice.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Rice:

Cemeteries Near Rice ...

Below are cemeteries that are in the vicinity of Rice.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Rice covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Rice, with the one closest to Rice listed first.

  • Mt. Zion Cemetery
    (Less than 2 miles to the northwest)
    • Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mt. Zion Cemetery
  • Monroe Cemetery
    (2 miles [3.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Monroe Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Monroe Cemetery
  • Mansfield Cemetery
    (2 miles [3.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Mansfield Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Mansfield Cemetery
  • Ice Cemetery
    (3 miles [4.8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Ice Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Ice Cemetery
  • Prairie Chapel Cemetery
    (4 miles [6.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Prairie Chapel Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Prairie Chapel Cemetery
  • Wing Cemetery
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Wing Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Wing Cemetery
  • Hoover Cemetery
    (5 miles [8 km] to the west)
    • To give a relative sense of its location, the Hoover Cemetery is located 3 miles [4.8 km]<4> to the southeast of Oakwood.
    • The Hoover Cemetery has also been known as:
    • Thomas Cemetery
    • Jump to our Gazetteer entry for the Hoover Cemetery
    • Jump to Find-A-Grave: FG ID #2319340 <5>
  • Oakwood Cemetery
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Oakwood Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Oakwood Cemetery
  • Kieferville Cemetery
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Kieferville Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Kieferville Cemetery
  • Myers Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the Myers Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Myers Cemetery
  • Hill Cemetery
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for the Hill Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Hill Cemetery
  • Kingery Cemetery
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for the Kingery Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Kingery Cemetery
  • Continue List   (378 more) ...
    • Oak Grove Cemetery
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Oak Grove Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Oak Grove Cemetery
    • Fairview Cemetery
      (6 miles [9.7 km] to the south)
      • Note: The GPS coordinates that we are using for the Fairview Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Fairview Cemetery
    • Taylor Cemetery
      (6 miles [9.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for the Taylor Cemetery have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Taylor Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

The Rand McNally Atlas shows that Rice had a population of 12 people in 1895 with a post office and no railroad service.

These communities are listed based on their distance from Rice, with the one closest to Rice listed first.

  • Continental
    (3 miles [4.8 km] to the south)
    • Note: The GPS coordinates that we are using for Continental have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Continental
    • Continental is located in Putnam County
    • Population from the 2020 Census: 1,085 people
    • Jump to TripAdvisor's Tourism page for Continental <2>
  • Wisterman
    (3 miles [4.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Wisterman have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wisterman
    • Wisterman is located in Putnam County
  • North Creek
    (3 miles [4.8 km] to the east)
    • Note: The GPS coordinates that we are using for North Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for North Creek
    • North Creek is located in Putnam County
  • Hartsburg
    (4 miles [6.4 km] to the south)
    • Jump to our Gazetteer entry for Hartsburg
    • Hartsburg is located in Putnam County
  • Hector
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Hector have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hector
    • Hector is located in Putnam County
  • Arthur
    (4 miles [6.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Arthur have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arthur
    • Arthur is located in Paulding County
  • Oakwood
    (5 miles [8 km] to the southwest)
    • Jump to our Gazetteer entry for Oakwood
    • Oakwood is located in Paulding County
    • Population from the 2020 Census: 582 people
  • Kieferville
    (5 miles [8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Kieferville have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kieferville
    • Kieferville is located in Putnam County
  • Pleasant Bend
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Pleasant Bend have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pleasant Bend
    • Pleasant Bend is located in Henry County
  • Dupont
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for Dupont have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dupont
    • Dupont is located in Putnam County
    • Population from the 2020 Census: 301 people
    • Jump to TripAdvisor's Tourism page for Dupont <2>
  • Ayersville
    (6 miles [9.7 km] to the north)
    • Jump to our Gazetteer entry for Ayersville
    • Ayersville is located in Defiance County
  • Charloe
    (7 miles [11.3 km] to the west)
    • Jump to our Gazetteer entry for Charloe
    • Charloe is located in Paulding County
  • Continue List   (16 more) ...
    • Melrose
      (7 miles [11.3 km] to the southwest)
      • Jump to our Gazetteer entry for Melrose
      • Melrose is located in Paulding County
      • Population from the 2020 Census: 259 people
    • New Bavaria
      (7 miles [11.3 km] to the northeast)
      • Note: The GPS coordinates that we are using for New Bavaria have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Bavaria
      • New Bavaria is located in Henry County
      • Population from the 2020 Census: 93 people
    • Cascade
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Cascade have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cascade
      • Cascade is located in Putnam County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Rice. See our List of 1890's Communities around Rice.

Unfortunately, we don't know of a website for Rice. If you can help, please contact us through our Feedback Page.

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Rice) to Point B.Our distance measurements begin at a specific point in Rice. The point we use is located at these GPS coordinates - Latitude: 41.1509, Longitude: -84.2944       In this case, the coordinates for Rice have been provided by the Geographic Names Information System (GNIS).
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Rice, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024