|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Ravenna had a population of 3,417 people in 1895 with a post office and railroad service. In 2020, Ravenna had a population of 11,326 people.
The following communities are listed based on their distance from Ravenna, with the one closest to Ravenna listed first.
- Campbellsport
(2 miles [3.2 km] to the southeast)
- New Milford
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for New Milford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Milford
- New Milford is located in Portage County
- Rootstown
(4 miles [6.4 km] to the south)
- Charlestown
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Charlestown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Charlestown
- Charlestown is located in Portage County
- Freedom Station
(5 miles [8 km] to the northeast)
- Note: The GPS coordinates that we are using for Freedom Station have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freedom Station
- Freedom Station is located in Portage County
- Shalersville
(5 miles [8 km] to the north)
- Note: The GPS coordinates that we are using for Shalersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shalersville
- Shalersville is located in Portage County
- Earlville
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Earlville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Earlville
- Earlville is located in Portage County
- Kent
(5 miles [8 km] to the west)
- Brimfield
(6 miles [9.7 km] to the southwest)
- Edinburg
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Edinburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edinburg
- Edinburg is located in Portage County
- Brimfield Station
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Brimfield Station have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brimfield Station
- Brimfield Station is located in Portage County
- Freedom
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Freedom have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freedom
- Freedom is located in Portage County
- Randolph
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Randolph have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Randolph
- Randolph is located in Portage County
- Jump to TripAdvisor's Tourism page for Randolph <3>
- Mantua
(8 miles [12.9 km] to the north)
- Streetsboro
(8 miles [12.9 km] to the northwest)
- Yale
(9 miles [14.5 km] to the southeast)
- Munroe Falls
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Munroe Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Munroe Falls
- Munroe Falls is located in Summit County
- Population from the 2020 Census: 5,054 people
- Jump to TripAdvisor's Tourism page for Munroe Falls <3>
- Mogadore
(10 miles [16.1 km] to the southwest)
- Suffield
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Suffield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Suffield
- Suffield is located in Portage County
- Atwater
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Atwater have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atwater
- Atwater is located in Portage County
- Jump to TripAdvisor's Tourism page for Atwater <3>
- Atwater Center
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Atwater Center have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Atwater Center
- Atwater Center is located in Portage County
- Palmyra
(10 miles [16.1 km] to the east)
- Darrowville
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Darrowville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Darrowville
- Darrowville is located in Summit County
- Tallmadge
(11 miles [17.7 km] to the west)
- Suffield Station
(11 miles [17.7 km] to the southwest)
- New Baltimore
(11 miles [17.7 km] to the south)
- Diamond
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Diamond. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Diamond
- Diamond is located in Portage County
- Google driving directions:
- From your current location to Diamond
- From Ravenna to Diamond
- McClintocksburg
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for McClintocksburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McClintocksburg
- McClintocksburg is located in Portage County
- Windham
(11 miles [17.7 km] to the northeast)
- Garrettsville
(11 miles [17.7 km] to the northeast)
- Hiram
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Hiram have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hiram
- Hiram is located in Portage County
- Population from the 2020 Census: 1,117 people
- Jump to TripAdvisor's Tourism page for Hiram <3>
- Hudson
(11 miles [17.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Hudson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudson
- Hudson is located in Summit County
- Population from the 2020 Census: 22,179 people
- Jump to TripAdvisor's Tourism page for Hudson <3>
- Metz
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Metz have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Metz
- Metz is located in Summit County
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Ravenna, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|