|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Pine Manor in the Atlas, the following communities of the 1890's would have been found near the current location of Pine Manor. The following communities are listed based on their distance, with the one closest to Pine Manor listed first.
- Shalersville
(Less than 2 miles to the east)
- Note: The GPS coordinates that we are using for Shalersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Shalersville
- Shalersville is located in Portage County
- Mantua
(3 miles [4.8 km] to the northeast)
- Note: The GPS coordinates that we are using for Mantua have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mantua
- Mantua is located in Portage County
- Population from the 2020 Census: 1,039 people
- Jump to TripAdvisor's Tourism page for Mantua <3>
- Streetsboro
(4 miles [6.4 km] to the west)
- Freedom
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Freedom have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freedom
- Freedom is located in Portage County
- Earlville
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Earlville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Earlville
- Earlville is located in Portage County
- Ravenna
(6 miles [9.7 km] to the south)
- Freedom Station
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Freedom Station have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Freedom Station
- Freedom Station is located in Portage County
- Charlestown
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Charlestown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Charlestown
- Charlestown is located in Portage County
- Hiram
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Hiram have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hiram
- Hiram is located in Portage County
- Population from the 2020 Census: 1,117 people
- Jump to TripAdvisor's Tourism page for Hiram <3>
- Aurora
(7 miles [11.3 km] to the northwest)
- Kent
(8 miles [12.9 km] to the southwest)
- Campbellsport
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Campbellsport
- Campbellsport is located in Portage County
- Garrettsville
(8 miles [12.9 km] to the east)
- New Milford
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for New Milford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Milford
- New Milford is located in Portage County
- Hudson
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Hudson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hudson
- Hudson is located in Summit County
- Population from the 2020 Census: 22,179 people
- Jump to TripAdvisor's Tourism page for Hudson <3>
- Darrowville
(10 miles [16.1 km] to the west)
- Note: The GPS coordinates that we are using for Darrowville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Darrowville
- Darrowville is located in Summit County
- Rootstown
(10 miles [16.1 km] to the south)
- Mahoning
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Mahoning have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mahoning
- Mahoning is located in Portage County
- Twinsburg
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Twinsburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twinsburg
- Twinsburg is located in Summit County
- Population from the 2020 Census: 18,913 people
- Jump to TripAdvisor's Tourism page for Twinsburg <3>
- Metz
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for Metz have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Metz
- Metz is located in Summit County
- Munroe Falls
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Munroe Falls have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Munroe Falls
- Munroe Falls is located in Summit County
- Population from the 2020 Census: 5,054 people
- Jump to TripAdvisor's Tourism page for Munroe Falls <3>
- Brimfield Station
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Brimfield Station have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Brimfield Station
- Brimfield Station is located in Portage County
- Brimfield
(11 miles [17.7 km] to the southwest)
- Edinburg
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Edinburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edinburg
- Edinburg is located in Portage County
- Windham
(11 miles [17.7 km] to the east)
- Nelson
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Nelson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Nelson
- Nelson is located in Portage County
- Jump to TripAdvisor's Tourism page for Nelson <3>
- Welshfield
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Welshfield
- Welshfield is located in Geauga County
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Pine Manor, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|