RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Auglaize County >> New Hampshire >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for New Hampshire. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for New Hampshire.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to New Hampshire - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 49 communities listed:

  • Ada
    (16 miles [25.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Ada have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ada
    • Ada is located in Hardin County
    • Population from the 2020 Census: 5,532 people
    • Jump to TripAdvisor's Tourism page for Ada <3>
  • Alger
    (12 miles [19.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Alger have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alger
    • Alger is located in Hardin County
    • Population from the 2020 Census: 835 people
    • Jump to TripAdvisor's Tourism page for Alger <3>
  • Anna
    (16 miles [25.7 km] to the southwest)
    • Jump to our Gazetteer entry for Anna
    • Anna is located in Shelby County
    • Population from the 2020 Census: 1,512 people
    • Jump to TripAdvisor's Tourism page for Anna <3>
  • Arlington
    (28 miles [45.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arlington
    • Arlington is located in Hancock County
    • Population from the 2020 Census: 1,431 people
    • Jump to TripAdvisor's Tourism page for Arlington <3>
  • Beaverdam
    (19 miles [30.6 km] to the north)
    • Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beaverdam
    • Beaverdam is located in Allen County
    • Population from the 2020 Census: 369 people
    • Jump to TripAdvisor's Tourism page for Beaverdam <3>
  • Bellefontaine
    (16 miles [25.7 km] to the southeast)
  • Bluffton
    (23 miles [37 km] to the north)
  • Botkins
    (13 miles [20.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Botkins have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Botkins
    • Botkins is located in Shelby County
    • Population from the 2020 Census: 1,160 people
    • Jump to TripAdvisor's Tourism page for Botkins <3>
  • Chickasaw
    (29 miles [46.7 km] to the west)
    • Note: The GPS coordinates that we are using for Chickasaw have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chickasaw
    • Chickasaw is located in Mercer County
    • Population from the 2020 Census: 297 people
    • Jump to TripAdvisor's Tourism page for Chickasaw <3>
  • Columbus Grove
    (25 miles [40.2 km] to the north)
    • Note: The GPS coordinates that we are using for Columbus Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Columbus Grove
    • Columbus Grove is located in Putnam County
    • Population from the 2020 Census: 2,061 people
    • Jump to TripAdvisor's Tourism page for Columbus Grove <3>
  • Cridersville
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Cridersville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cridersville
    • Cridersville is located in Auglaize County
    • Population from the 2020 Census: 1,780 people
    • Jump to TripAdvisor's Tourism page for Cridersville <3>
  • De Graff
    (16 miles [25.7 km] to the south)
    • Note: The GPS coordinates that we are using for De Graff have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for De Graff
    • De Graff is located in Logan County
    • Population from the 2020 Census: 1,262 people
    • Jump to TripAdvisor's Tourism page for De Graff <3>
  • Delphos
    (28 miles [45.1 km] to the northwest)
  • Dola
    (20 miles [32.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Dola have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dola
    • Dola is located in Hardin County
    • Jump to TripAdvisor's Tourism page for Dola <3>
  • Dunkirk
    (22 miles [35.4 km] to the northeast)
    • Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dunkirk
    • Dunkirk is located in Hardin County
    • Population from the 2020 Census: 842 people
    • Jump to TripAdvisor's Tourism page for Dunkirk <3>
  • Forest
    (28 miles [45.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Forest have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Forest
    • Forest is located in Hardin County
    • Population from the 2020 Census: 1,444 people
    • Jump to TripAdvisor's Tourism page for Forest <3>
  • Fort Jennings
    (30 miles [48.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fort Jennings have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fort Jennings
    • Fort Jennings is located in Putnam County
    • Population from the 2020 Census: 495 people
    • Jump to TripAdvisor's Tourism page for Fort Jennings <3>
  • Fort Loramie
    (26 miles [41.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fort Loramie have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fort Loramie
    • Fort Loramie is located in Shelby County
    • Population from the 2020 Census: 1,537 people
    • Jump to TripAdvisor's Tourism page for Fort Loramie <3>
  • Gomer
    (23 miles [37 km] to the northwest)
    • Note: The GPS coordinates that we are using for Gomer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gomer
    • Gomer is located in Allen County
    • Jump to TripAdvisor's Tourism page for Gomer <3>
  • Harrod
    (10 miles [16.1 km] to the north)
  • Huntsville
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Huntsville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Huntsville
    • Huntsville is located in Logan County
    • Population from the 2020 Census: 441 people
    • Jump to TripAdvisor's Tourism page for Huntsville <3>
  • Jackson Center
    (9 miles [14.5 km] to the southwest)
  • Jenera
    (26 miles [41.8 km] to the northeast)
  • Kenton
    (19 miles [30.6 km] to the east)
  • Kettlersville
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Kettlersville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kettlersville
    • Kettlersville is located in Shelby County
    • Population from the 2020 Census: 169 people
    • Jump to TripAdvisor's Tourism page for Kettlersville <3>
  • Lafayette
    (14 miles [22.5 km] to the north)
    • Note: The GPS coordinates that we are using for Lafayette have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lafayette
    • Lafayette is located in Allen County
    • Population from the 2020 Census: 418 people
    • Jump to TripAdvisor's Tourism page for Lafayette <3>
  • Lakeview
    (4 miles [6.4 km] to the south)
    • Note: The GPS coordinates that we are using for Lakeview have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lakeview
    • Lakeview is located in Logan County
    • Population from the 2020 Census: 1,105 people
    • Jump to TripAdvisor's Tourism page for Lakeview <3>
  • Lima
    (15 miles [24.1 km] to the northwest)
    • Jump to our Gazetteer entry for Lima
    • Lima is located in Allen County
    • Population from the 2020 Census: 36,440 people
    • Jump to TripAdvisor's Tourism page for Lima <3>
  • Maria Stein
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Maria Stein have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maria Stein
    • Maria Stein is located in Mercer County
    • Jump to TripAdvisor's Tourism page for Maria Stein <3>
  • Mendon
    (30 miles [48.3 km] to the west)
    • Note: The GPS coordinates that we are using for Mendon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mendon
    • Mendon is located in Mercer County
    • Population from the 2020 Census: 642 people
    • Jump to TripAdvisor's Tourism page for Mendon <3>
  • Middleburg
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Middleburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Middleburg
    • Middleburg is located in Logan County
    • Jump to TripAdvisor's Tourism page for Middleburg <3>
  • Mingo
    (29 miles [46.7 km] to the southeast)
  • Minster
    (24 miles [38.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Minster have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Minster
    • Minster is located in Auglaize County
    • Population from the 2020 Census: 2,828 people
    • Jump to TripAdvisor's Tourism page for Minster <3>
  • Mount Victory
    (22 miles [35.4 km] to the east)
  • New Bremen
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for New Bremen have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Bremen
    • New Bremen is located in Auglaize County
    • Population from the 2020 Census: 2,949 people
    • Jump to TripAdvisor's Tourism page for New Bremen <3>
  • Port Jefferson
    (17 miles [27.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Port Jefferson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Port Jefferson
    • Port Jefferson is located in Shelby County
    • Population from the 2020 Census: 358 people
    • Jump to TripAdvisor's Tourism page for Port Jefferson <3>
  • Quincy
    (17 miles [27.4 km] to the south)
  • Rawson
    (29 miles [46.7 km] to the north)
    • Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rawson
    • Rawson is located in Hancock County
    • Population from the 2020 Census: 552 people
    • Jump to TripAdvisor's Tourism page for Rawson <3>
  • Raymond
    (29 miles [46.7 km] to the southeast)
  • Roundhead
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Roundhead have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roundhead
    • Roundhead is located in Hardin County
    • Jump to TripAdvisor's Tourism page for Roundhead <3>
  • Rushsylvania
    (16 miles [25.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Rushsylvania have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rushsylvania
    • Rushsylvania is located in Logan County
    • Population from the 2020 Census: 525 people
    • Jump to TripAdvisor's Tourism page for Rushsylvania <3>
  • Russells Point
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Russells Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Russells Point
    • Russells Point is located in Logan County
    • Population from the 2020 Census: 1,378 people
    • Jump to TripAdvisor's Tourism page for Russells Point <3>
  • Saint Marys
    (22 miles [35.4 km] to the west)
  • Saint Paris
    (29 miles [46.7 km] to the south)
  • Sidney
    (21 miles [33.8 km] to the southwest)
  • Spencerville
    (23 miles [37 km] to the northwest)
  • Wapakoneta
    (12 miles [19.3 km] to the west)
  • West Liberty
    (23 miles [37 km] to the southeast)
  • Zanesfield
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Zanesfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Zanesfield
    • Zanesfield is located in Logan County
    • Population from the 2020 Census: 194 people
    • Jump to TripAdvisor's Tourism page for Zanesfield <3>

Unfortunately, we don't know of an official website for New Hampshire. If you can help, please contact us through our Feedback Page.

The official website for Auglaize County: www.auglaizecounty.org

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- New Hampshire) to Point B.Our distance measurements begin at a specific point in New Hampshire. The point we use is located at these GPS coordinates - Latitude: 40.5562, Longitude: -83.9527       In this case, the coordinates for New Hampshire have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024