RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Knox County >> Mount Vernon >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that Mount Vernon had a population of 6,027 people in 1895 with a post office and railroad service. In 2020, Mount Vernon had a population of 16,660 people.

The following communities are listed based on their distance from Mount Vernon, with the one closest to Mount Vernon listed first.

  • Bangs
    (4 miles [6.4 km] to the southwest)
  • Gambier
    (4 miles [6.4 km] to the east)
  • Brandon
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Brandon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brandon
    • Brandon is located in Knox County
  • Hunt
    (5 miles [8 km] to the south)
  • Monroe Mills
    (6 miles [9.7 km] to the east)
    • Note: The GPS coordinates that we are using for Monroe Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monroe Mills
    • Monroe Mills is located in Knox County
  • Fredericktown
    (6 miles [9.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fredericktown have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fredericktown
    • Fredericktown is located in Knox County
    • Population from the 2020 Census: 2,526 people
    • Jump to TripAdvisor's Tourism page for Fredericktown <2>
  • Mount Liberty
    (8 miles [12.9 km] to the southwest)
  • Milfordton
    (8 miles [12.9 km] to the southwest)
  • Morgan Center
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Morgan Center have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Morgan Center
    • Morgan Center is located in Knox County
  • Howard
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Howard have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Howard
    • Howard is located in Knox County
    • Jump to TripAdvisor's Tourism page for Howard <2>
  • Homer
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Homer have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Homer
    • Homer is located in Licking County
  • Pipesville
    (9 miles [14.5 km] to the east)
  • Ankenytown
    (9 miles [14.5 km] to the north)
    • Note: The GPS coordinates that we are using for Ankenytown have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ankenytown
    • Ankenytown is located in Knox County
  • Lock
    (10 miles [16.1 km] to the southwest)
    • Note: We haven't been able to verify our GPS coordinates for Lock. Although the coordinates have been estimated, they should be in the vicinity.<4>
    • Jump to our Gazetteer entry for Lock
    • Lock is located in Licking County
    • Google driving directions:
    • From your current location to Lock
    • From Mount Vernon to Lock
  • Utica
    (10 miles [16.1 km] to the south)
  • Martinsburg
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Martinsburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Martinsburg
    • Martinsburg is located in Knox County
    • Population from the 2020 Census: 232 people
    • Jump to TripAdvisor's Tourism page for Martinsburg <2>
  • Millwood
    (10 miles [16.1 km] to the east)
  • North Liberty
    (10 miles [16.1 km] to the north)
  • Chesterville
    (11 miles [17.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Chesterville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chesterville
    • Chesterville is located in Morrow County
    • Population from the 2020 Census: 234 people
    • Jump to TripAdvisor's Tourism page for Chesterville <2>
  • Sparta
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Sparta have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sparta
    • Sparta is located in Morrow County
    • Population from the 2020 Census: 160 people
    • Jump to TripAdvisor's Tourism page for Sparta <2>
  • Centerburg
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Centerburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Centerburg
    • Centerburg is located in Knox County
    • Population from the 2020 Census: 2,231 people
    • Jump to TripAdvisor's Tourism page for Centerburg <2>
  • Bangorville
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Bangorville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bangorville
    • Bangorville is located in Richland County
  • Buckeye City
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Buckeye City have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Buckeye City
    • Buckeye City is located in Knox County
  • Danville
    (12 miles [19.3 km] to the east)
  • Bloomfield
    (12 miles [19.3 km] to the west)

The official website for Mount Vernon: www.mountvernonohio.org/

The official website for Knox County: www.knoxcountyohio.org/

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Mount Vernon, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<4>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 25 Mar 2025