RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Putnam County >> Glandorf >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Glandorf (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Glandorf. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the northeast corner of their home county. During their lives, most hospitals and doctors were in the next county to the east. Almost all of the nearby churches and cemeteries were in the county to the north.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the east contained birth and death records; the county to the north contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Glandorf is located in Putnam County.

To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Putnam County: Allen, Defiance, Hancock, Henry, Paulding, Van Wert & Wood.

Below are the counties that are near Glandorf. For each of these counties, we show a sample of those communities that are closest to Glandorf:

  • Putnam County     (The home county of Glandorf)
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • Ottawa
      (Less than 2 miles to the east)
    • Miller City
      (5 miles [8 km] to the northwest)
      • Note: The GPS coordinates that we are using for Miller City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Miller City
      • Miller City is located in Putnam County
      • Population from the 2020 Census: 138 people
      • Jump to TripAdvisor's Tourism page for Miller City <1>
    • Leipsic
      (6 miles [9.7 km] to the northeast)
    • West Leipsic
      (6 miles [9.7 km] to the northeast)
      • Jump to our Gazetteer entry for West Leipsic
      • West Leipsic is located in Putnam County
      • Population from the 2020 Census: 188 people
    • Kalida
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kalida
      • Kalida is located in Putnam County
      • Population from the 2020 Census: 1,583 people
      • Jump to TripAdvisor's Tourism page for Kalida <1>
    • Leipsic Junction
      (7 miles [11.3 km] to the northeast)
      • Jump to our Gazetteer entry for Leipsic Junction
      • Leipsic Junction is located in Putnam County
    • Columbus Grove
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Columbus Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Columbus Grove
      • Columbus Grove is located in Putnam County
      • Population from the 2020 Census: 2,061 people
      • Jump to TripAdvisor's Tourism page for Columbus Grove <1>
    • Gilboa
      (8 miles [12.9 km] to the east)
      • Note: The GPS coordinates that we are using for Gilboa have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gilboa
      • Gilboa is located in Putnam County
      • Population from the 2020 Census: 173 people
    • Kieferville
      (8 miles [12.9 km] to the northwest)
      • Note: The GPS coordinates that we are using for Kieferville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kieferville
      • Kieferville is located in Putnam County
    • Pandora
      (8 miles [12.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Pandora have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Pandora
      • Pandora is located in Putnam County
      • Population from the 2020 Census: 1,101 people
    • Townwood
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Townwood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Townwood
      • Townwood is located in Putnam County
    • Continental
      (10 miles [16.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Continental have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Continental
      • Continental is located in Putnam County
      • Population from the 2020 Census: 1,085 people
      • Jump to TripAdvisor's Tourism page for Continental <1>
  • Allen County
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • Cairo
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for Cairo have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cairo
      • Cairo is located in Allen County
      • Population from the 2020 Census: 520 people
    • West Cairo
      (13 miles [20.9 km] to the south)
      • Note: The GPS coordinates that we are using for West Cairo have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Cairo
      • West Cairo is located in Allen County
    • Bluffton
      (13 miles [20.9 km] to the southeast)
    • Gomer
      (13 miles [20.9 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gomer have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gomer
      • Gomer is located in Allen County
      • Jump to TripAdvisor's Tourism page for Gomer <1>
    • Beaverdam
      (14 miles [22.5 km] to the south)
      • Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Beaverdam
      • Beaverdam is located in Allen County
      • Population from the 2020 Census: 369 people
      • Jump to TripAdvisor's Tourism page for Beaverdam <1>
    • Elida
      (17 miles [27.4 km] to the south)
      • Note: The GPS coordinates that we are using for Elida have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elida
      • Elida is located in Allen County
      • Population from the 2020 Census: 1,810 people
    • Scotts Crossing
      (17 miles [27.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Scotts Crossing have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Scotts Crossing
      • Scotts Crossing is located in Allen County
    • Delphos
      (18 miles [29 km] to the southwest)
    • Lafayette
      (19 miles [30.6 km] to the south)
      • Note: The GPS coordinates that we are using for Lafayette have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lafayette
      • Lafayette is located in Allen County
      • Population from the 2020 Census: 418 people
      • Jump to TripAdvisor's Tourism page for Lafayette <1>
    • Lima
      (19 miles [30.6 km] to the south)
      • Jump to our Gazetteer entry for Lima
      • Lima is located in Allen County
      • Population from the 2020 Census: 36,440 people
      • Jump to TripAdvisor's Tourism page for Lima <1>
    • Landeck
      (22 miles [35.4 km] to the southwest)
      • Jump to our Gazetteer entry for Landeck
      • Landeck is located in Allen County
    • Southworth
      (22 miles [35.4 km] to the southwest)
      • Jump to our Gazetteer entry for Southworth
      • Southworth is located in Allen County
  • Auglaize County
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • Cridersville
      (26 miles [41.8 km] to the south)
      • Note: The GPS coordinates that we are using for Cridersville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cridersville
      • Cridersville is located in Auglaize County
      • Population from the 2020 Census: 1,780 people
      • Jump to TripAdvisor's Tourism page for Cridersville <1>
    • Buckland
      (29 miles [46.7 km] to the south)
      • Note: The GPS coordinates that we are using for Buckland have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Buckland
      • Buckland is located in Auglaize County
      • Population from the 2020 Census: 221 people
    • Uniopolis
      (29 miles [46.7 km] to the south)
      • Jump to our Gazetteer entry for Uniopolis
      • Uniopolis is located in Auglaize County
      • Estimated population in 2016: 220 people
    • Waynesfield
      (30 miles [48.3 km] to the south)
      • Jump to our Gazetteer entry for Waynesfield
      • Waynesfield is located in Auglaize County
      • Population from the 2020 Census: 815 people
  • Defiance County
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • Ayersville
      (18 miles [29 km] to the northwest)
      • Jump to our Gazetteer entry for Ayersville
      • Ayersville is located in Defiance County
    • Defiance
      (22 miles [35.4 km] to the northwest)
    • Jewell
      (23 miles [37 km] to the northwest)
      • Jump to our Gazetteer entry for Jewell
      • Jewell is located in Defiance County
    • Williamstown
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Williamstown
      • Williamstown is located in Defiance County
    • Sherwood
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Sherwood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Sherwood
      • Sherwood is located in Defiance County
      • Population from the 2020 Census: 803 people
      • Jump to TripAdvisor's Tourism page for Sherwood <1>
  • Hancock County
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • Moffitt ‑ Historic
      (12 miles [19.3 km] to the east)
      • Note: The GPS coordinates that we are using for Moffitt have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Moffitt
      • Moffitt is located in Hancock County
    • Hancock
      (14 miles [22.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Hancock have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hancock
      • Hancock is located in Hancock County
    • Mount Cory
      (14 miles [22.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for Mount Cory have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Cory
      • Mount Cory is located in Hancock County
      • Population from the 2020 Census: 195 people
    • Benton Ridge
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Benton Ridge have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Benton Ridge
      • Benton Ridge is located in Hancock County
      • Population from the 2020 Census: 289 people
    • Lewisburg ‑ Historic
      (15 miles [24.1 km] to the east)
      • Note: We haven't been able to verify our GPS coordinates for Lewisburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Lewisburg
      • Lewisburg is located in Hancock County
    • McComb
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for McComb have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McComb
      • McComb is located in Hancock County
      • Population from the 2020 Census: 1,632 people
      • Jump to TripAdvisor's Tourism page for McComb <1>
    • Rawson
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Rawson
      • Rawson is located in Hancock County
      • Population from the 2020 Census: 552 people
      • Jump to TripAdvisor's Tourism page for Rawson <1>
    • Cannonsburg ‑ Historic
      (17 miles [27.4 km] to the southeast)
      • Jump to our Gazetteer entry for Cannonsburg
      • Cannonsburg is located in Hancock County
    • Jenera
      (20 miles [32.2 km] to the southeast)
    • Findlay
      (22 miles [35.4 km] to the east)
    • New Stark
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for New Stark have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Stark
      • New Stark is located in Hancock County
    • Van Buren
      (23 miles [37 km] to the east)
      • Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Van Buren
      • Van Buren is located in Hancock County
      • Population from the 2020 Census: 538 people
      • Jump to TripAdvisor's Tourism page for Van Buren <1>
  • Hardin County
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • Ada
      (22 miles [35.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Ada have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ada
      • Ada is located in Hardin County
      • Population from the 2020 Census: 5,532 people
      • Jump to TripAdvisor's Tourism page for Ada <1>
    • Alger
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Alger have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alger
      • Alger is located in Hardin County
      • Population from the 2020 Census: 835 people
      • Jump to TripAdvisor's Tourism page for Alger <1>
    • Dola
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Dola have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dola
      • Dola is located in Hardin County
      • Jump to TripAdvisor's Tourism page for Dola <1>
    • Huntersville
      (26 miles [41.8 km] to the southeast)
      • Note: The GPS coordinates that we are using for Huntersville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Huntersville
      • Huntersville is located in Hardin County
    • McGuffey
      (27 miles [43.5 km] to the southeast)
      • Note: The GPS coordinates that we are using for McGuffey have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McGuffey
      • McGuffey is located in Hardin County
      • Population from the 2020 Census: 484 people
    • Dunkirk
      (28 miles [45.1 km] to the southeast)
      • Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dunkirk
      • Dunkirk is located in Hardin County
      • Population from the 2020 Census: 842 people
      • Jump to TripAdvisor's Tourism page for Dunkirk <1>
  • Henry County
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • New Bavaria
      (12 miles [19.3 km] to the north)
      • Note: The GPS coordinates that we are using for New Bavaria have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New Bavaria
      • New Bavaria is located in Henry County
      • Population from the 2020 Census: 93 people
    • Hamler
      (14 miles [22.5 km] to the north)
    • Holgate
      (15 miles [24.1 km] to the north)
    • Deshler
      (15 miles [24.1 km] to the northeast)
    • Elery
      (18 miles [29 km] to the north)
      • Note: The GPS coordinates that we are using for Elery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elery
      • Elery is located in Henry County
    • Malinta
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Malinta have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Malinta
      • Malinta is located in Henry County
      • Population from the 2020 Census: 252 people
      • Jump to TripAdvisor's Tourism page for Malinta <1>
    • Florida
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for Florida have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Florida
      • Florida is located in Henry County
      • Population from the 2020 Census: 213 people
    • Okolona
      (23 miles [37 km] to the north)
      • Jump to our Gazetteer entry for Okolona
      • Okolona is located in Henry County
      • Okolona has also been known as:
      • Okalona
    • McClure
      (24 miles [38.6 km] to the north)
      • Note: The GPS coordinates that we are using for McClure have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for McClure
      • McClure is located in Henry County
      • Population from the 2020 Census: 678 people
      • Jump to TripAdvisor's Tourism page for McClure <1>
    • Napoleon
      (25 miles [40.2 km] to the north)
    • Liberty Center
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Liberty Center have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Liberty Center
      • Liberty Center is located in Henry County
      • Population from the 2020 Census: 1,123 people
      • Jump to TripAdvisor's Tourism page for Liberty Center <1>
    • Colton
      (30 miles [48.3 km] to the north)
      • Jump to our Gazetteer entry for Colton
      • Colton is located in Henry County
  • Paulding County
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • Mandale
      (14 miles [22.5 km] to the west)
      • Jump to our Gazetteer entry for Mandale
      • Mandale is located in Paulding County
    • Murat ‑ Historic
      (15 miles [24.1 km] to the west)
      • Note: The GPS coordinates that we are using for Murat have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Murat
      • Murat is located in Paulding County
      • Former names for Murat:
      • Hipp's Lock
      • Timberville
    • Oakwood
      (16 miles [25.7 km] to the west)
      • Jump to our Gazetteer entry for Oakwood
      • Oakwood is located in Paulding County
      • Population from the 2020 Census: 582 people
    • Fort Brown
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Fort Brown
      • Fort Brown is located in Paulding County
    • Melrose
      (18 miles [29 km] to the west)
      • Jump to our Gazetteer entry for Melrose
      • Melrose is located in Paulding County
      • Population from the 2020 Census: 259 people
    • Saint Andrews ‑ Historic
      (18 miles [29 km] to the west)
      • Note: The GPS coordinates that we are using for Saint Andrews have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saint Andrews
      • Saint Andrews is located in Paulding County
    • Charloe
      (19 miles [30.6 km] to the west)
      • Jump to our Gazetteer entry for Charloe
      • Charloe is located in Paulding County
    • Grover Hill
      (20 miles [32.2 km] to the west)
      • Jump to our Gazetteer entry for Grover Hill
      • Grover Hill is located in Paulding County
      • Population from the 2020 Census: 377 people
    • Junction
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for Junction
      • Junction is located in Paulding County
    • Hedges
      (23 miles [37 km] to the west)
      • Note: The GPS coordinates that we are using for Hedges have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hedges
      • Hedges is located in Paulding County
    • Broughton
      (24 miles [38.6 km] to the west)
      • Note: The GPS coordinates that we are using for Broughton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Broughton
      • Broughton is located in Paulding County
      • Population from the 2020 Census: 115 people
    • Dague ‑ Historic
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Dague have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dague
      • Dague is located in Paulding County
  • Van Wert County
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • Middle Point
      (22 miles [35.4 km] to the southwest)
      • Note: The GPS coordinates that we are using for Middle Point have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Middle Point
      • Middle Point is located in Van Wert County
      • Population from the 2020 Census: 557 people
      • Jump to TripAdvisor's Tourism page for Middle Point <1>
    • Hoaglin
      (22 miles [35.4 km] to the west)
      • Jump to our Gazetteer entry for Hoaglin
      • Hoaglin is located in Van Wert County
    • Venedocia
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Venedocia have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Venedocia
      • Venedocia is located in Van Wert County
      • Population from the 2020 Census: 118 people
    • Scott
      (26 miles [41.8 km] to the west)
    • Elgin
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Elgin have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Elgin
      • Elgin is located in Van Wert County
      • Population from the 2020 Census: 55 people
    • Van Wert
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Van Wert have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Van Wert
      • Van Wert is located in Van Wert County
      • Population from the 2020 Census: 10,614 people
      • Jump to TripAdvisor's Tourism page for Van Wert <1>
    • Monticello
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Monticello
      • Monticello is located in Van Wert County
  • Wood County
    • The following are listed by their distance from Glandorf, with the one closest to Glandorf listed first.
    • Hoytville
      (18 miles [29 km] to the northeast)
      • Jump to our Gazetteer entry for Hoytville
      • Hoytville is located in Wood County
      • Population from the 2020 Census: 318 people
    • Custar
      (21 miles [33.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Custar have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Custar
      • Custar is located in Wood County
      • Population from the 2020 Census: 184 people
      • Jump to TripAdvisor's Tourism page for Custar <1>
    • Milton Center
      (22 miles [35.4 km] to the northeast)
      • Jump to our Gazetteer entry for Milton Center
      • Milton Center is located in Wood County
      • Population from the 2020 Census: 146 people
    • North Baltimore
      (23 miles [37 km] to the northeast)
    • Hammansburg
      (24 miles [38.6 km] to the northeast)
      • Note: The GPS coordinates that we are using for Hammansburg have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hammansburg
      • Hammansburg is located in Wood County
    • Bairdstown
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Bairdstown have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bairdstown
      • Bairdstown is located in Wood County
      • Population from the 2020 Census: 136 people
    • Cygnet
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Cygnet have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cygnet
      • Cygnet is located in Wood County
      • Population from the 2020 Census: 622 people
      • Jump to TripAdvisor's Tourism page for Cygnet <1>
    • Weston
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Weston have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Weston
      • Weston is located in Wood County
      • Population from the 2020 Census: 1,657 people
      • Jump to TripAdvisor's Tourism page for Weston <1>
    • Grand Rapids
      (28 miles [45.1 km] to the north)
      • Note: The GPS coordinates that we are using for Grand Rapids have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Grand Rapids
      • Grand Rapids is located in Wood County
      • Population from the 2020 Census: 1,006 people
      • Jump to TripAdvisor's Tourism page for Grand Rapids <1>
    • Bloomdale
      (29 miles [46.7 km] to the east)
      • Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bloomdale
      • Bloomdale is located in Wood County
      • Population from the 2020 Census: 682 people
      • Jump to TripAdvisor's Tourism page for Bloomdale <1>
    • Eagleville
      (29 miles [46.7 km] to the northeast)
      • Jump to our Gazetteer entry for Eagleville
      • Eagleville is located in Wood County
    • Jerry City
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Jerry City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Jerry City
      • Jerry City is located in Wood County
      • Population from the 2020 Census: 437 people

For an expanded list of the communities that are closest to Glandorf, see our County-by-County Page for Glandorf.

Newspapers Published in Glandorf ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 42 newspapers that have been published in the area around Glandorf.

Although we're unaware of any newspapers that were published in the immediate area of Glandorf, there are papers which were published within 23 miles [37 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Glandorf.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we first turn to the websites from Cyndi's List, FamilySearch and Genealogy Trails. These helpful websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Glandorf:

Cemeteries Near Glandorf ...

Below are cemeteries that are in the vicinity of Glandorf.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Glandorf covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Glandorf, with the one closest to Glandorf listed first.

  • St. Johns Cemetery
    (Less than 2 miles to the east)
    • Note: The GPS coordinates that we are using for the St. Johns Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Johns Cemetery
  • St.s Peter & Paul Cemetery
    (Less than 2 miles to the southeast)
    • Note: The GPS coordinates that we are using for the St.s Peter & Paul Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St.s Peter & Paul Cemetery
  • Pomeroy Cemetery
    (2 miles [3.2 km] to the southeast)
  • Holy Family Cemetery
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the Holy Family Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Holy Family Cemetery
  • Crow Cemetery
    (3 miles [4.8 km] to the northwest)
  • Riley Creek Cemetery
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for the Riley Creek Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Riley Creek Cemetery
  • Varner Cemetery
    (4 miles [6.4 km] to the northwest)
  • Myers Cemetery
    (4 miles [6.4 km] to the west)
  • St. Nicholas Cemetery
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for the St. Nicholas Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the St. Nicholas Cemetery
  • Maidlow Cemetery
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for the Maidlow Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the Maidlow Cemetery
  • Blanchard Cemetery
    (5 miles [8 km] to the northeast)
    • The Blanchard Cemetery has also been known as:
    • Poplar Ridge Cemetery
    • Jump to our Gazetteer entry for the Blanchard Cemetery
  • McConnel Cemetery
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for the McConnel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for the McConnel Cemetery
  • Continue List   (406 more) ...
    • Clevenger Cemetery
      (6 miles [9.7 km] to the southwest)
      • Note: The GPS coordinates that we are using for the Clevenger Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Clevenger Cemetery
    • Wisely Cemetery
      (6 miles [9.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for the Wisely Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the Wisely Cemetery
    • St. Johns Cemetery
      (6 miles [9.7 km] to the north)
      • Note: The GPS coordinates that we are using for the St. Johns Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for the St. Johns Cemetery

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

The Rand McNally Atlas shows that Glandorf had a population of 571 people in 1895 with a post office and railroad service. In 2020, Glandorf had a population of 1,030 people.

These communities are listed based on their distance from Glandorf, with the one closest to Glandorf listed first.

  • Ottawa
    (Less than 2 miles to the east)
  • Avis
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Avis have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Avis
    • Avis is located in Putnam County
  • Miller City
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Miller City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Miller City
    • Miller City is located in Putnam County
    • Population from the 2020 Census: 138 people
    • Jump to TripAdvisor's Tourism page for Miller City <1>
  • Elm Center
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Elm Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elm Center
    • Elm Center is located in Putnam County
  • Kalida
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kalida
    • Kalida is located in Putnam County
    • Population from the 2020 Census: 1,583 people
    • Jump to TripAdvisor's Tourism page for Kalida <1>
  • Leipsic
    (6 miles [9.7 km] to the northeast)
  • West Leipsic
    (6 miles [9.7 km] to the northeast)
    • Jump to our Gazetteer entry for West Leipsic
    • West Leipsic is located in Putnam County
    • Population from the 2020 Census: 188 people
  • Columbus Grove
    (7 miles [11.3 km] to the south)
    • Note: The GPS coordinates that we are using for Columbus Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Columbus Grove
    • Columbus Grove is located in Putnam County
    • Population from the 2020 Census: 2,061 people
    • Jump to TripAdvisor's Tourism page for Columbus Grove <1>
  • Leipsic Junction
    (7 miles [11.3 km] to the northeast)
    • Jump to our Gazetteer entry for Leipsic Junction
    • Leipsic Junction is located in Putnam County
  • Pandora
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Pandora have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pandora
    • Pandora is located in Putnam County
    • Population from the 2020 Census: 1,101 people
  • Gilboa
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Gilboa have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gilboa
    • Gilboa is located in Putnam County
    • Population from the 2020 Census: 173 people
  • Kieferville
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Kieferville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kieferville
    • Kieferville is located in Putnam County
  • Continue List   (18 more) ...
    • Hector
      (9 miles [14.5 km] to the northwest)
      • Note: The GPS coordinates that we are using for Hector have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Hector
      • Hector is located in Putnam County
    • Vaughnsville
      (10 miles [16.1 km] to the south)
      • Note: The GPS coordinates that we are using for Vaughnsville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vaughnsville
      • Vaughnsville is located in Putnam County
    • Townwood
      (10 miles [16.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Townwood have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Townwood
      • Townwood is located in Putnam County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Glandorf. See our List of 1890's Communities around Glandorf.

Unfortunately, we don't know of a website for Glandorf. If you can help, please contact us through our Feedback Page.

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Glandorf) to Point B.Our distance measurements begin at a specific point in Glandorf. The point we use is located at these GPS coordinates - Latitude: 41.0282, Longitude: -84.0791       In this case, the coordinates for Glandorf have been provided by the Geographic Names Information System (GNIS).
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Glandorf, please let us know so that we can improve our accuracy.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024