|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Gabels Corner in the Atlas, the following communities of the 1890's would have been found near the current location of Gabels Corner. The following communities are listed based on their distance, with the one closest to Gabels Corner listed first.
- Millersville
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for Millersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millersville
- Millersville is located in Sandusky County
- Fremont
(4 miles [6.4 km] to the northeast)
- Burgoon
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Burgoon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burgoon
- Burgoon is located in Sandusky County
- Population from the 2020 Census: 163 people
- Hessville
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Hessville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hessville
- Hessville is located in Sandusky County
- Helena
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Helena have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Helena
- Helena is located in Sandusky County
- Population from the 2020 Census: 208 people
- Jump to TripAdvisor's Tourism page for Helena <3>
- Lindsey
(6 miles [9.7 km] to the north)
- Bettsville
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Bettsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bettsville
- Bettsville is located in Seneca County
- Population from the 2020 Census: 618 people
- Jump to TripAdvisor's Tourism page for Bettsville <3>
- Old Fort
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Old Fort have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Fort
- Old Fort is located in Seneca County
- Tinney
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Tinney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tinney
- Tinney is located in Sandusky County
- Kansas
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Kansas have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kansas
- Kansas is located in Seneca County
- Linden ‑ Historic
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Linden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linden
- Linden is located in Seneca County
- Maple Grove
(7 miles [11.3 km] to the south)
- Kingsway
(7 miles [11.3 km] to the northeast)
- Gibsonburg
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Gibsonburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gibsonburg
- Gibsonburg is located in Sandusky County
- Population from the 2020 Census: 2,483 people
- Jump to TripAdvisor's Tourism page for Gibsonburg <3>
- Fort Seneca
(8 miles [12.9 km] to the south)
- Green Springs
(8 miles [12.9 km] to the southeast)
- Erlin
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Erlin. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Erlin
- Erlin is located in Sandusky County
- Google driving directions:
- From your current location to Erlin
- From Gabels Corner to Erlin
- Rollersville
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Rollersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rollersville
- Rollersville is located in Sandusky County
- Amsden
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Amsden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Amsden
- Amsden is located in Seneca County
- Angus
(10 miles [16.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Angus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Angus
- Angus is located in Seneca County
- Cromers
(10 miles [16.1 km] to the south)
- Watson
(10 miles [16.1 km] to the southeast)
- Clyde
(11 miles [17.7 km] to the east)
- Elmore
(11 miles [17.7 km] to the northwest)
- Risingsun
(12 miles [19.3 km] to the west)
- Oak Harbor
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Oak Harbor have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Oak Harbor
- Oak Harbor is located in Ottawa County
- Population from the 2020 Census: 2,692 people
- Jump to TripAdvisor's Tourism page for Oak Harbor <3>
- Woodville
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Woodville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Woodville
- Woodville is located in Sandusky County
- Population from the 2020 Census: 2,008 people
- Jump to TripAdvisor's Tourism page for Woodville <3>
- Bradner
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Bradner have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bradner
- Bradner is located in Wood County
- Population from the 2020 Census: 1,020 people
- Jump to TripAdvisor's Tourism page for Bradner <3>
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gabels Corner, please let us know so that we can improve our accuracy. |
| <2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|