|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Flatiron in the Atlas, the following communities of the 1890's would have been found near the current location of Flatiron. The following communities are listed based on their distance, with the one closest to Flatiron listed first.
- McLuney
(Less than 2 miles to the southwest)
- Note: The GPS coordinates that we are using for McLuney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McLuney
- McLuney is located in Perry County
- Rose Farm
(Less than 2 miles to the southeast)
- Note: The GPS coordinates that we are using for Rose Farm have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rose Farm
- Rose Farm is located in Morgan County
- Crooksville
(Less than 2 miles to the north)
- Lyonsdale ‑ Historic
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Lyonsdale have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lyonsdale
- Lyonsdale is located in Perry County
- Deavertown
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for Deavertown
- Deavertown is located in Morgan County
- Sayre
(4 miles [6.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Sayre have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sayre
- Sayre is located in Perry County
- Roseville
(4 miles [6.4 km] to the north)
- Saltillo
(4 miles [6.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Saltillo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Saltillo
- Saltillo is located in Perry County
- Redfield
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for Redfield
- Redfield is located in Perry County
- Rehoboth
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for Rehoboth
- Rehoboth is located in Perry County
- New Lexington
(6 miles [9.7 km] to the west)
- Moxahala
(6 miles [9.7 km] to the south)
- Note: The GPS coordinates that we are using for Moxahala have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Moxahala
- Moxahala is located in Perry County
- Portersville
(6 miles [9.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Portersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Portersville
- Portersville is located in Perry County
- Fultonham
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Fultonham have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fultonham
- Fultonham is located in Muskingum County
- Population from the 2020 Census: 160 people
- Triadelphia
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Triadelphia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Triadelphia
- Triadelphia is located in Morgan County
- Cannelville
(7 miles [11.3 km] to the northeast)
- Jump to our Gazetteer entry for Cannelville
- Cannelville is located in Muskingum County
- Bristol
(8 miles [12.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Bristol have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bristol
- Bristol is located in Perry County
- Rendville
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Rendville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rendville
- Rendville is located in Perry County
- Population from the 2020 Census: 36 people
- Chapel Hill ‑ Historic
(8 miles [12.9 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Chapel Hill. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Chapel Hill
- Chapel Hill is located in Perry County
- Stovertown
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Stovertown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stovertown
- Stovertown is located in Muskingum County
- White Cottage
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for White Cottage have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for White Cottage
- White Cottage is located in Muskingum County
- Corning
(9 miles [14.5 km] to the south)
- Halls Valley ‑ Historic
(9 miles [14.5 km] to the southeast)
- Note: The GPS coordinates that we are using for Halls Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Halls Valley
- Halls Valley is located in Morgan County
- Eagleport
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Eagleport. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Eagleport
- Eagleport is located in Morgan County
- Durant
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for Durant have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Durant
- Durant is located in Morgan County
- Darlington
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Darlington. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Darlington
- Darlington is located in Muskingum County
- Lewis ‑ Historic
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Lewis have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lewis
- Lewis is located in Muskingum County
- Sego
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Sego have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sego
- Sego is located in Perry County
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Flatiron, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|