Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Dalzell had a population of 58 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Dalzell, with the one closest to Dalzell listed first.
- Gasville
(2 miles [3.2 km] to the south)
- Heslop
(3 miles [4.8 km] to the south)
- Heslop is located in Washington County
- Jump to our Gazetteer entry for Heslop
- Wingett Run
(3 miles [4.8 km] to the southeast)
- Wingett Run is located in Washington County
- Jump to our Gazetteer entry for Wingett Run
- Harriettsville
(4 miles [6.4 km] to the north)
- Muskingum ‑ Historic
(4 miles [6.4 km] to the east)
- Muskingum is located in Washington County
- Jump to our Gazetteer entry for Muskingum
- Quarry ‑ Historic
(4 miles [6.4 km] to the northeast)
- Quarry is located in Monroe County
- Jump to our Gazetteer entry for Quarry
- Kilmer
(4 miles [6.4 km] to the northwest)
- Kilmer is located in Noble County
- Jump to our Gazetteer entry for Kilmer
- Lower Salem
(4 miles [6.4 km] to the west)
- Lower Salem is located in Washington County
- Jump to our Gazetteer entry for Lower Salem
- Population from the 2020 Census: 82 people
- Steel Run
(5 miles [8 km] to the southeast)
- Whipple
(6 miles [9.7 km] to the southwest)
- Moss Run
(6 miles [9.7 km] to the south)
- Moss Run is located in Washington County
- Jump to our Gazetteer entry for Moss Run
- Fay
(6 miles [9.7 km] to the south)
- Fay is located in Washington County
- Jump to our Gazetteer entry for Fay
- Hohman
(6 miles [9.7 km] to the east)
- Hohman is located in Washington County
- Jump to our Gazetteer entry for Hohman
- Marr
(6 miles [9.7 km] to the northeast)
- Marr is located in Monroe County
- Jump to our Gazetteer entry for Marr
- Elba
(6 miles [9.7 km] to the northwest)
- Warner
(6 miles [9.7 km] to the west)
- Elk
(7 miles [11.3 km] to the north)
- Elk is located in Noble County
- Jump to our Gazetteer entry for Elk
- Archers Fork
(7 miles [11.3 km] to the southeast)
- Archers Fork is located in Washington County
- Jump to our Gazetteer entry for Archers Fork
- Sycamore Valley
(7 miles [11.3 km] to the northeast)
- Sycamore Valley is located in Monroe County
- Jump to our Gazetteer entry for Sycamore Valley
- Stanleyville
(8 miles [12.9 km] to the southwest)
- Stanleyville is located in Washington County
- Jump to our Gazetteer entry for Stanleyville
- Caywood
(8 miles [12.9 km] to the southwest)
- Caywood is located in Washington County
- Jump to our Gazetteer entry for Caywood
- Sitka
(8 miles [12.9 km] to the south)
- Sitka is located in Washington County
- Jump to our Gazetteer entry for Sitka
- Cow Run
(8 miles [12.9 km] to the south)
- Cow Run is located in Washington County
- Jump to our Gazetteer entry for Cow Run
- Gracey
(8 miles [12.9 km] to the south)
- Gracey is located in Washington County
- Jump to our Gazetteer entry for Gracey
- Deucher
(8 miles [12.9 km] to the southeast)
- Rinard Mills
(8 miles [12.9 km] to the east)
- Rinard Mills is located in Monroe County
- Jump to our Gazetteer entry for Rinard Mills
- Way
(8 miles [12.9 km] to the northeast)
- Way is located in Monroe County
- Jump to our Gazetteer entry for Way
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Dalzell, please let us know so that we can improve our accuracy. |