|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Petrie Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Petrie Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Petrie Cemetery (FG ID #42655). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Petrie Cemetery. We've listed the following communities based on their distance, with the closest first.
- Celina
(Less than 2 miles to the northeast)
- Coldwater
(4 miles [6.4 km] to the southwest)
- Montezuma
(4 miles [6.4 km] to the southeast)
- Tama
(6 miles [9.7 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Tama. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Tama
- Tama is located in Mercer County
- Google driving directions:
- From your current location to Tama
- From the Petrie Cemetery to Tama
- Mercer
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Mercer have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mercer
- Mercer is located in Mercer County
- Saint Henry
(8 miles [12.9 km] to the south)
- Chickasaw
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Chickasaw have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Chickasaw
- Chickasaw is located in Mercer County
- Population from the 2020 Census: 297 people
- Jump to TripAdvisor's Tourism page for Chickasaw <3>
- Scudder
(8 miles [12.9 km] to the west)
- Wabash
(8 miles [12.9 km] to the west)
- Macedon
(9 miles [14.5 km] to the southwest)
- Mendon
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Mendon have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mendon
- Mendon is located in Mercer County
- Population from the 2020 Census: 642 people
- Jump to TripAdvisor's Tourism page for Mendon <3>
- Rockford
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Rockford have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockford
- Rockford is located in Mercer County
- Population from the 2020 Census: 1,105 people
- Jump to TripAdvisor's Tourism page for Rockford <3>
- Saint Marys
(10 miles [16.1 km] to the east)
- Skeels Crossroads
(10 miles [16.1 km] to the west)
- Wendelin
(11 miles [17.7 km] to the southwest)
- Fort Recovery
(13 miles [20.9 km] to the southwest)
- Burkettsville
(13 miles [20.9 km] to the south)
- New Bremen
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for New Bremen have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Bremen
- New Bremen is located in Auglaize County
- Population from the 2020 Census: 2,949 people
- Jump to TripAdvisor's Tourism page for New Bremen <3>
- Monticello
(13 miles [20.9 km] to the northeast)
- Jay City
(13 miles [20.9 km] to the west)
- Trinity
(13 miles [20.9 km] to the west)
- New Weston
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for New Weston have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Weston
- New Weston is located in Darke County
- Population from the 2020 Census: 129 people
- Jump to TripAdvisor's Tourism page for New Weston <3>
- Osgood
(14 miles [22.5 km] to the south)
- Note: The GPS coordinates that we are using for Osgood have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Osgood
- Osgood is located in Darke County
- Population from the 2020 Census: 282 people
- Jump to TripAdvisor's Tourism page for Osgood <3>
- New Knoxville
(14 miles [22.5 km] to the east)
- Elgin
(14 miles [22.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Elgin. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Elgin
- Elgin is located in Van Wert County
- Population from the 2020 Census: 55 people
- Google driving directions:
- From your current location to Elgin
- From the Petrie Cemetery to Elgin
Off-the-Road Links ...
The official website for Mercer County: www.mercercountyohio.org/ The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Petrie Cemetery. The point we use is located at these GPS coordinates - Latitude: 40.5425, Longitude: -84.5849 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|