|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Hulse Farm Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Hulse Farm Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Hulse Farm Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Fox
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for Fox
- Fox is located in Pickaway County
- Circleville
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Circleville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Circleville
- Circleville is located in Pickaway County
- Population from the 2020 Census: 14,158 people
- Jump to TripAdvisor's Tourism page for Circleville <3>
- Williamsport
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Williamsport have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamsport
- Williamsport is located in Pickaway County
- Population from the 2020 Census: 1,085 people
- Jump to TripAdvisor's Tourism page for Williamsport <3>
- Logan Elm Village
(5 miles [8 km] to the southeast)
- Note: The GPS coordinates that we are using for Logan Elm Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Logan Elm Village
- Logan Elm Village is located in Pickaway County
- Pherson
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for Pherson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pherson
- Pherson is located in Pickaway County
- Knollwood Village
(6 miles [9.7 km] to the east)
- Note: The GPS coordinates that we are using for Knollwood Village have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Knollwood Village
- Knollwood Village is located in Pickaway County
- South Bloomfield
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for South Bloomfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Bloomfield
- South Bloomfield is located in Pickaway County
- Population from the 2020 Census: 1,977 people
- Ashville
(7 miles [11.3 km] to the northeast)
- Note: The GPS coordinates that we are using for Ashville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ashville
- Ashville is located in Pickaway County
- Population from the 2020 Census: 4,465 people
- Jump to TripAdvisor's Tourism page for Ashville <3>
- Darbyville
(7 miles [11.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Darbyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Darbyville
- Darbyville is located in Pickaway County
- Population from the 2020 Census: 232 people
- Yellowbud
(8 miles [12.9 km] to the south)
- Jump to our Gazetteer entry for Yellowbud
- Yellowbud is located in Ross County
- Thacher
(8 miles [12.9 km] to the southeast)
- Jump to our Gazetteer entry for Thacher
- Thacher is located in Pickaway County
- Thacher has also been known as:
- Livington
- Thatcher Corners
- Grange Hall
(8 miles [12.9 km] to the west)
- Jump to our Gazetteer entry for Grange Hall
- Grange Hall is located in Pickaway County
- East Ringgold
(9 miles [14.5 km] to the east)
- Note: The GPS coordinates that we are using for East Ringgold have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Ringgold
- East Ringgold is located in Pickaway County
- Commercial Point
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Commercial Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Commercial Point
- Commercial Point is located in Pickaway County
- Population from the 2020 Census: 1,695 people
- Jump to TripAdvisor's Tourism page for Commercial Point <3>
- Clarksburg
(10 miles [16.1 km] to the southwest)
- Jump to our Gazetteer entry for Clarksburg
- Clarksburg is located in Ross County
- Population from the 2020 Census: 441 people
- Stoutsville
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Stoutsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stoutsville
- Stoutsville is located in Fairfield County
- Population from the 2020 Census: 566 people
- Jump to TripAdvisor's Tourism page for Stoutsville <3>
- Saint Paul
(10 miles [16.1 km] to the northeast)
- Jump to our Gazetteer entry for Saint Paul
- Saint Paul is located in Pickaway County
- Duvall
(10 miles [16.1 km] to the north)
- Jump to our Gazetteer entry for Duvall
- Duvall is located in Pickaway County
- Kingston
(11 miles [17.7 km] to the southeast)
- Cedar Hill
(12 miles [19.3 km] to the northeast)
- Jump to our Gazetteer entry for Cedar Hill
- Cedar Hill is located in Fairfield County
- New Holland
(13 miles [20.9 km] to the west)
- Note: The GPS coordinates that we are using for New Holland have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Holland
- New Holland is located in Pickaway County
- Population from the 2020 Census: 857 people
- Jump to TripAdvisor's Tourism page for New Holland <3>
- Andersonville
(13 miles [20.9 km] to the south)
- Jump to our Gazetteer entry for Andersonville
- Andersonville is located in Ross County
- Tarlton
(13 miles [20.9 km] to the east)
- Lockbourne
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Lockbourne have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lockbourne
- Lockbourne is located in Franklin County
- Population from the 2020 Census: 249 people
- Jump to TripAdvisor's Tourism page for Lockbourne <3>
- Ridpath ‑ Historic
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Ridpath have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ridpath
- Ridpath is located in Franklin County
- Huntsville
(14 miles [22.5 km] to the east)
- Note: The GPS coordinates that we are using for Huntsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Huntsville
- Huntsville is located in Pickaway County
- Orient
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Orient have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orient
- Orient is located in Pickaway County
- Estimated population in 2014: 275 people
- Jump to TripAdvisor's Tourism page for Orient <3>
- Zuber ‑ Historic
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Zuber have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Zuber
- Zuber is located in Franklin County
- Mount Sterling
(14 miles [22.5 km] to the northwest)
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Hulse Farm Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.6212, Longitude: -83.0213 In this case, the coordinates for the Hulse Farm Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
|
|