Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Crestview Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Crestview Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Crestview Cemetery. We've listed the following communities based on their distance, with the closest first.
- Barnesville
(Less than 2 miles to the north)- Jump to our Gazetteer entry for Barnesville
- Barnesville is located in Belmont County
- Population from the 2020 Census: 3,949 people
- Jump to TripAdvisor's Tourism page for Barnesville <2>
- Fairview
(5 miles [8 km] to the northwest)- Jump to our Gazetteer entry for Fairview
- Fairview is located in Guernsey County
- Population from the 2020 Census: 81 people
- Fairview has also been known as:
- Fairview village
- Jump to TripAdvisor's Tourism page for Fairview <2>
- Hendrysburg
(5 miles [8 km] to the north)- Note: We haven't been able to verify our GPS coordinates for Hendrysburg. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Hendrysburg
- Hendrysburg is located in Belmont County
- Batesville
(6 miles [9.7 km] to the southwest)- Jump to our Gazetteer entry for Batesville
- Batesville is located in Noble County
- Population from the 2020 Census: 98 people
- Hunter
(6 miles [9.7 km] to the east) - Bethesda
(6 miles [9.7 km] to the northeast)- Note: The GPS coordinates that we are using for Bethesda have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bethesda
- Bethesda is located in Belmont County
- Population from the 2020 Census: 1,198 people
- Jump to TripAdvisor's Tourism page for Bethesda <2>
- Quaker City
(6 miles [9.7 km] to the west)- Jump to our Gazetteer entry for Quaker City
- Quaker City is located in Guernsey County
- Population from the 2020 Census: 485 people
- Jump to TripAdvisor's Tourism page for Quaker City <2>
- Belmont
(8 miles [12.9 km] to the northeast)- Jump to our Gazetteer entry for Belmont
- Belmont is located in Belmont County
- Population from the 2020 Census: 429 people
- Jump to TripAdvisor's Tourism page for Belmont <2>
- Morristown
(8 miles [12.9 km] to the northeast)- Note: The GPS coordinates that we are using for Morristown have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Morristown
- Morristown is located in Belmont County
- Population from the 2020 Census: 285 people
- Salesville
(8 miles [12.9 km] to the west)- Note: The GPS coordinates that we are using for Salesville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salesville
- Salesville is located in Guernsey County
- Estimated population in 2016: 126 people
- Jump to TripAdvisor's Tourism page for Salesville <2>
- Jerusalem
(9 miles [14.5 km] to the southeast) - Loomis
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Loomis
- Loomis is located in Belmont County
- Middlebourne
(9 miles [14.5 km] to the northwest)- Jump to our Gazetteer entry for Middlebourne
- Middlebourne is located in Guernsey County
- Miltonsburg
(10 miles [16.1 km] to the south)- Note: The GPS coordinates that we are using for Miltonsburg have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miltonsburg
- Miltonsburg is located in Monroe County
- Population from the 2020 Census: 41 people
- Wilson
(10 miles [16.1 km] to the southeast) - Kennonsburg
(11 miles [17.7 km] to the southwest)- Jump to our Gazetteer entry for Kennonsburg
- Kennonsburg is located in Noble County
- Ozark
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for Ozark
- Ozark is located in Monroe County
- Beallsville
(11 miles [17.7 km] to the southeast)- Note: The GPS coordinates that we are using for Beallsville have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beallsville
- Beallsville is located in Monroe County
- Population from the 2020 Census: 376 people
- Rock Hill
(11 miles [17.7 km] to the north)- Jump to our Gazetteer entry for Rock Hill
- Rock Hill is located in Belmont County
- Mud Run
(12 miles [19.3 km] to the southwest)- Jump to our Gazetteer entry for Mud Run
- Mud Run is located in Noble County
- Lafferty
(12 miles [19.3 km] to the northeast)- Jump to our Gazetteer entry for Lafferty
- Lafferty is located in Belmont County
- Holloway
(12 miles [19.3 km] to the north) - Elizabethtown
(12 miles [19.3 km] to the west)- Note: We haven't been able to verify our GPS coordinates for Elizabethtown. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Elizabethtown
- Elizabethtown is located in Guernsey County
- Gibson
(12 miles [19.3 km] to the west)- Jump to our Gazetteer entry for Gibson
- Gibson is located in Guernsey County
- Armstrongs Mills
(13 miles [20.9 km] to the east)- Note: We haven't been able to verify our GPS coordinates for Armstrongs Mills. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Armstrongs Mills
- Armstrongs Mills is located in Belmont County
- Londonderry
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Londonderry
- Londonderry is located in Guernsey County
- Warnock
(13 miles [20.9 km] to the east)- Jump to our Gazetteer entry for Warnock
- Warnock is located in Belmont County
- East Richland
(13 miles [20.9 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for East Richland. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for East Richland
- East Richland is located in Belmont County
- Bannock
(13 miles [20.9 km] to the northeast)- Jump to our Gazetteer entry for Bannock
- Bannock is located in Belmont County
- Jump to TripAdvisor's Tourism page for Bannock <2>
- Oco
(13 miles [20.9 km] to the northeast)- Jump to our Gazetteer entry for Oco
- Oco is located in Belmont County
- Flushing
(13 miles [20.9 km] to the northeast)- Jump to our Gazetteer entry for Flushing
- Flushing is located in Belmont County
- Population from the 2020 Census: 821 people
- Jump to TripAdvisor's Tourism page for Flushing <2>
- Antrim
(13 miles [20.9 km] to the northwest)- Jump to our Gazetteer entry for Antrim
- Antrim is located in Guernsey County
- Easton ‑ Historic
(13 miles [20.9 km] to the west)
Off-the-Road Links ...
The official website for Belmont County: www.belmontcountyohio.org/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Crestview Cemetery. The point we use is located at these GPS coordinates - Latitude: 39.9795, Longitude: -81.1818 In this case, the coordinates for the Crestview Cemetery have been provided by the Geographic Names Information System (GNIS). |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |