Our Genealogy Helper
Introduction ...
We have a couple of goals for our Gazetteer:
- That it be a tool which helps us with planning our trips.
- We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
- On our trips, we try to visit those places where our ancestors left their footprints.
By learning about Canalport (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.
As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Canalport. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.
Neighboring Counties ...
When searching for family records, we have frequently made the mistake of not checking the neighboring counties.
For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.
So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived: their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.
If you're in a similar situation, we hope that the following information helps.
Canalport is located in Paulding County.
To see how the shape of Ohio's counties have changed over time, we recommend the Atlas of Historical County Boundaries.
The following counties adjoin and form the boundaries of Paulding County: Allen (IN), Defiance, Putnam & Van Wert.
Below are the counties that are near Canalport. For each of these counties, we show a sample of those communities that are closest to Canalport:
- Paulding County (The home county of Canalport)
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Saint Andrews ‑ Historic
(Less than 2 miles to the south)
- Note: We haven't been able to verify our GPS coordinates for Saint Andrews. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Saint Andrews
- Saint Andrews is located in Paulding County
- Fort Brown
(Less than 2 miles to the southeast)
- Jump to our Gazetteer entry for Fort Brown
- Fort Brown is located in Paulding County
- Charloe
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for Charloe
- Charloe is located in Paulding County
- Melrose
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for Melrose
- Melrose is located in Paulding County
- Population from the 2020 Census: 259 people
- Oakwood
(3 miles [4.8 km] to the southeast)
- Jump to our Gazetteer entry for Oakwood
- Oakwood is located in Paulding County
- Population from the 2020 Census: 582 people
- Hedges
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hedges. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hedges
- Hedges is located in Paulding County
- Junction
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for Junction
- Junction is located in Paulding County
- Murat ‑ Historic
(5 miles [8 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Murat. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Murat
- Murat is located in Paulding County
- Former names for Murat:
- Hipp's Lock
- Timberville
- Broughton
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Broughton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broughton
- Broughton is located in Paulding County
- Population from the 2020 Census: 115 people
- Grover Hill
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Grover Hill
- Grover Hill is located in Paulding County
- Population from the 2020 Census: 377 people
- Mandale
(7 miles [11.3 km] to the southeast)
- Jump to our Gazetteer entry for Mandale
- Mandale is located in Paulding County
- Dague ‑ Historic
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Dague. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Dague
- Dague is located in Paulding County
- Allen County
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Delphos
(19 miles [30.6 km] to the south)
- Landeck
(21 miles [33.8 km] to the south)
- Jump to our Gazetteer entry for Landeck
- Landeck is located in Allen County
- Scotts Crossing
(22 miles [35.4 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Scotts Crossing. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Scotts Crossing
- Scotts Crossing is located in Allen County
- Gomer
(22 miles [35.4 km] to the southeast)
- Note: The GPS coordinates that we are using for Gomer have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gomer
- Gomer is located in Allen County
- Jump to TripAdvisor's Tourism page for Gomer <3>
- Southworth
(24 miles [38.6 km] to the south)
- Jump to our Gazetteer entry for Southworth
- Southworth is located in Allen County
- Elida
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Elida have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Elida
- Elida is located in Allen County
- Population from the 2020 Census: 1,810 people
- Cairo
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Cairo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cairo
- Cairo is located in Allen County
- Population from the 2020 Census: 520 people
- West Cairo
(26 miles [41.8 km] to the southeast)
- Note: The GPS coordinates that we are using for West Cairo have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Cairo
- West Cairo is located in Allen County
- Conant
(28 miles [45.1 km] to the south)
- Jump to our Gazetteer entry for Conant
- Conant is located in Allen County
- Spencerville
(28 miles [45.1 km] to the south)
- Beaverdam
(30 miles [48.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Beaverdam
- Beaverdam is located in Allen County
- Population from the 2020 Census: 369 people
- Jump to TripAdvisor's Tourism page for Beaverdam <3>
- Lima
(30 miles [48.3 km] to the southeast)
- Defiance County
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Ayersville
(11 miles [17.7 km] to the northeast)
- Jump to our Gazetteer entry for Ayersville
- Ayersville is located in Defiance County
- Defiance
(12 miles [19.3 km] to the north)
- Williamstown
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Williamstown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Williamstown
- Williamstown is located in Defiance County
- Sherwood
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Sherwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sherwood
- Sherwood is located in Defiance County
- Population from the 2020 Census: 803 people
- Jump to TripAdvisor's Tourism page for Sherwood <3>
- Jewell
(16 miles [25.7 km] to the northeast)
- Jump to our Gazetteer entry for Jewell
- Jewell is located in Defiance County
- Ney
(18 miles [29 km] to the north)
- Hicksville
(21 miles [33.8 km] to the northwest)
- Fulton County
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Archbold
(28 miles [45.1 km] to the north)
- Pettisville
(30 miles [48.3 km] to the north)
- Jump to our Gazetteer entry for Pettisville
- Pettisville is located in Fulton County
- Hancock County
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Hancock
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Hancock. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hancock
- Hancock is located in Hancock County
- Moffitt ‑ Historic
(30 miles [48.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Moffitt. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Moffitt
- Moffitt is located in Hancock County
- Henry County
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- New Bavaria
(14 miles [22.5 km] to the northeast)
- Note: The GPS coordinates that we are using for New Bavaria have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for New Bavaria
- New Bavaria is located in Henry County
- Population from the 2020 Census: 93 people
- Holgate
(17 miles [27.4 km] to the northeast)
- Florida
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Florida have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Florida
- Florida is located in Henry County
- Population from the 2020 Census: 213 people
- Okolona
(19 miles [30.6 km] to the northeast)
- Jump to our Gazetteer entry for Okolona
- Okolona is located in Henry County
- Okolona has also been known as:
- Okalona
- Hamler
(21 miles [33.8 km] to the east)
- Elery
(22 miles [35.4 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Elery. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Elery
- Elery is located in Henry County
- Malinta
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Malinta have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Malinta
- Malinta is located in Henry County
- Population from the 2020 Census: 252 people
- Jump to TripAdvisor's Tourism page for Malinta <3>
- Napoleon
(24 miles [38.6 km] to the northeast)
- Grelton
(27 miles [43.5 km] to the northeast)
- Jump to our Gazetteer entry for Grelton
- Grelton is located in Henry County
- Deshler
(28 miles [45.1 km] to the east)
- McClure
(30 miles [48.3 km] to the northeast)
- Note: The GPS coordinates that we are using for McClure have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for McClure
- McClure is located in Henry County
- Population from the 2020 Census: 678 people
- Jump to TripAdvisor's Tourism page for McClure <3>
- Putnam County
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Hartsburg
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Hartsburg
- Hartsburg is located in Putnam County
- Dupont
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Dupont. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Dupont
- Dupont is located in Putnam County
- Population from the 2020 Census: 301 people
- Jump to TripAdvisor's Tourism page for Dupont <3>
- Continental
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Continental have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Continental
- Continental is located in Putnam County
- Population from the 2020 Census: 1,085 people
- Jump to TripAdvisor's Tourism page for Continental <3>
- Cloverdale
(9 miles [14.5 km] to the southeast)
- Jump to our Gazetteer entry for Cloverdale
- Cloverdale is located in Putnam County
- Population from the 2020 Census: 159 people
- Kieferville
(11 miles [17.7 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Kieferville. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Kieferville
- Kieferville is located in Putnam County
- Muntanna
(11 miles [17.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Muntanna. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Muntanna
- Muntanna is located in Putnam County
- Ottoville
(13 miles [20.9 km] to the south)
- Note: The GPS coordinates that we are using for Ottoville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ottoville
- Ottoville is located in Putnam County
- Population from the 2020 Census: 960 people
- Jump to TripAdvisor's Tourism page for Ottoville <3>
- Miller City
(15 miles [24.1 km] to the east)
- Note: The GPS coordinates that we are using for Miller City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miller City
- Miller City is located in Putnam County
- Population from the 2020 Census: 138 people
- Jump to TripAdvisor's Tourism page for Miller City <3>
- Kalida
(15 miles [24.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kalida
- Kalida is located in Putnam County
- Population from the 2020 Census: 1,583 people
- Jump to TripAdvisor's Tourism page for Kalida <3>
- Fort Jennings
(16 miles [25.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Fort Jennings have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Jennings
- Fort Jennings is located in Putnam County
- Population from the 2020 Census: 495 people
- Jump to TripAdvisor's Tourism page for Fort Jennings <3>
- Glandorf
(19 miles [30.6 km] to the east)
- Note: The GPS coordinates that we are using for Glandorf have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Glandorf
- Glandorf is located in Putnam County
- Population from the 2020 Census: 1,030 people
- Jump to TripAdvisor's Tourism page for Glandorf <3>
- Rimer
(19 miles [30.6 km] to the southeast)
- Jump to our Gazetteer entry for Rimer
- Rimer is located in Putnam County
- Van Wert County
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Scott
(11 miles [17.7 km] to the southwest)
- Hoaglin
(12 miles [19.3 km] to the south)
- Jump to our Gazetteer entry for Hoaglin
- Hoaglin is located in Van Wert County
- Middle Point
(18 miles [29 km] to the south)
- Note: The GPS coordinates that we are using for Middle Point have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middle Point
- Middle Point is located in Van Wert County
- Population from the 2020 Census: 557 people
- Jump to TripAdvisor's Tourism page for Middle Point <3>
- Van Wert
(19 miles [30.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Van Wert have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Van Wert
- Van Wert is located in Van Wert County
- Population from the 2020 Census: 10,614 people
- Jump to TripAdvisor's Tourism page for Van Wert <3>
- Convoy
(20 miles [32.2 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Convoy. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Convoy
- Convoy is located in Van Wert County
- Population from the 2020 Census: 1,050 people
- Jump to TripAdvisor's Tourism page for Convoy <3>
- Venedocia
(22 miles [35.4 km] to the south)
- Note: The GPS coordinates that we are using for Venedocia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Venedocia
- Venedocia is located in Van Wert County
- Population from the 2020 Census: 118 people
- Dixon
(22 miles [35.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Dixon. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Dixon
- Dixon is located in Van Wert County
- Elgin
(25 miles [40.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Elgin. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Elgin
- Elgin is located in Van Wert County
- Population from the 2020 Census: 55 people
- Ohio City
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Ohio City have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ohio City
- Ohio City is located in Van Wert County
- Population from the 2020 Census: 669 people
- Jump to TripAdvisor's Tourism page for Ohio City <3>
- Glenmore
(26 miles [41.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Glenmore. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Glenmore
- Glenmore is located in Van Wert County
- Abanaka
(28 miles [45.1 km] to the southwest)
- Jump to our Gazetteer entry for Abanaka
- Abanaka is located in Van Wert County
- Wren
(28 miles [45.1 km] to the southwest)
- Note: The GPS coordinates that we are using for Wren have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Wren
- Wren is located in Van Wert County
- Population from the 2020 Census: 184 people
- Jump to TripAdvisor's Tourism page for Wren <3>
- Williams County
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Bryan
(25 miles [40.2 km] to the north)
- Stryker
(26 miles [41.8 km] to the north)
- Melbern
(26 miles [41.8 km] to the northwest)
- Jump to our Gazetteer entry for Melbern
- Melbern is located in Williams County
- Pulaski
(27 miles [43.5 km] to the north)
- Jump to our Gazetteer entry for Pulaski
- Pulaski is located in Williams County
- Edgerton
(28 miles [45.1 km] to the northwest)
- Denmark ‑ Historic
(30 miles [48.3 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Denmark. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Denmark
- Denmark is located in Williams County
- Allen County (IN)
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Edgerton
(19 miles [30.6 km] to the west)
- Jump to our Gazetteer entry for Edgerton
- Edgerton is located in Allen County (IN)
- Dixon
(22 miles [35.4 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Dixon. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Dixon
- Dixon is located in Allen County (IN)
- Woodburn
(22 miles [35.4 km] to the west)
- Monroeville
(24 miles [38.6 km] to the southwest)
- Zulu
(25 miles [40.2 km] to the west)
- Jump to our Gazetteer entry for Zulu
- Zulu is located in Allen County (IN)
- Harlan
(26 miles [41.8 km] to the west)
- Note: The GPS coordinates that we are using for Harlan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Harlan
- Harlan is located in Allen County (IN)
- Jump to TripAdvisor's Tourism page for Harlan <3>
- Grabill
(28 miles [45.1 km] to the west)
- New Haven
(30 miles [48.3 km] to the west)
- DeKalb County (IN)
- The following are listed by their distance from Canalport, with the one closest to Canalport listed first.
- Saint Joe
(28 miles [45.1 km] to the northwest)
- Spencerville
(28 miles [45.1 km] to the northwest)
- Concord
(30 miles [48.3 km] to the northwest)
- Jump to our Gazetteer entry for Concord
- Concord is located in DeKalb County (IN)
For an expanded list of the communities that are closest to Canalport, see our County-by-County Page for Canalport.
Cemeteries Near Canalport ...
Below are cemeteries that are in the vicinity of Canalport.
This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.
If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).
If not found below, our Cemetery List for Canalport covers a larger area, with the cemeteries listed in alphabetical order.
The following cemeteries are listed based on their distance from Canalport, with the one closest to Canalport listed first.
- Blakeslee Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Blakeslee Cemetery
- Note: The GPS coordinates that we are using for the Blakeslee Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Kingery Cemetery
(Less than 2 miles to the east)
- Jump to our Gazetteer entry for the Kingery Cemetery
- Note: The GPS coordinates that we are using for the Kingery Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Hoover Cemetery
(Less than 2 miles to the northeast)
- Jump to our Gazetteer entry for the Hoover Cemetery
- To give a relative sense of its location, the Hoover Cemetery is located 3 miles [4.8 km]<4> to the southeast of Oakwood.
- The Hoover Cemetery has also been known as:
- Thomas Cemetery
- Jump to Find-A-Grave: FG ID #2319340 <5>
- Sherman Cemetery
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for the Sherman Cemetery
- To give a relative sense of its location, the Sherman Cemetery is a large cemetery that is located 3 miles [4.8 km]<4> to the southeast of Oakwood.
- Jump to Find-A-Grave: FG ID #43405 <5>
- Bowholtz Cemetery
(2 miles [3.2 km] to the west)
- Jump to our Gazetteer entry for the Bowholtz Cemetery
- Note: The GPS coordinates that we are using for the Bowholtz Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Oakwood Cemetery
(2 miles [3.2 km] to the southeast)
- Jump to our Gazetteer entry for the Oakwood Cemetery
- Note: The GPS coordinates that we are using for the Oakwood Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Prairie Chapel Cemetery
(3 miles [4.8 km] to the east)
- Jump to our Gazetteer entry for the Prairie Chapel Cemetery
- Note: The GPS coordinates that we are using for the Prairie Chapel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mt. Zion Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Mt. Zion Cemetery
- Note: The GPS coordinates that we are using for the Mt. Zion Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Wilson Cemetery
(4 miles [6.4 km] to the south)
- Jump to our Gazetteer entry for the Wilson Cemetery
- Note: The GPS coordinates that we are using for the Wilson Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Hertel Cemetery
(4 miles [6.4 km] to the southeast)
- Jump to our Gazetteer entry for the Hertel Cemetery
- Note: The GPS coordinates that we are using for the Hertel Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Dotterer Cemetery
(4 miles [6.4 km] to the northwest)
- Jump to our Gazetteer entry for the Dotterer Cemetery
- Note: The GPS coordinates that we are using for the Dotterer Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Hedges Cemetery
(5 miles [8 km] to the west)
- Jump to our Gazetteer entry for the Hedges Cemetery
- Note: The GPS coordinates that we are using for the Hedges Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Continue List (370 more) ...
- Middle Creek Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Middle Creek Cemetery
- Note: The GPS coordinates that we are using for the Middle Creek Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Junction Cemetery
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for the Junction Cemetery
- Note: The GPS coordinates that we are using for the Junction Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
- Mellinger Cemetery
(5 miles [8 km] to the south)
- Jump to our Gazetteer entry for the Mellinger Cemetery
- Note: The GPS coordinates that we are using for the Mellinger Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
Nearby Communities in 1895 ...
We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>
While we didn't find Canalport in the Atlas, the following 1895 communities would have been found near the current location of Canalport.
These communities are listed based on their distance from Canalport, with the one closest to Canalport listed first.
- Charloe
(Less than 2 miles to the north)
- Jump to our Gazetteer entry for Charloe
- Charloe is located in Paulding County
- Melrose
(Less than 2 miles to the south)
- Jump to our Gazetteer entry for Melrose
- Melrose is located in Paulding County
- Population from the 2020 Census: 259 people
- Goodwin ‑ Historic
(2 miles [3.2 km] to the southwest)
- Note: The GPS coordinates that we are using for Goodwin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Goodwin
- Goodwin is located in Paulding County
- Hedges
(4 miles [6.4 km] to the west)
- Note: We haven't been able to verify our GPS coordinates for Hedges. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Hedges
- Hedges is located in Paulding County
- Broughton
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Broughton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broughton
- Broughton is located in Paulding County
- Population from the 2020 Census: 115 people
- Junction
(5 miles [8 km] to the north)
- Jump to our Gazetteer entry for Junction
- Junction is located in Paulding County
- Hartsburg
(5 miles [8 km] to the east)
- Jump to our Gazetteer entry for Hartsburg
- Hartsburg is located in Putnam County
- Arthur
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Arthur have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arthur
- Arthur is located in Paulding County
- Grover Hill
(7 miles [11.3 km] to the south)
- Jump to our Gazetteer entry for Grover Hill
- Grover Hill is located in Paulding County
- Population from the 2020 Census: 377 people
- Plumbs Cross Roads ‑ Historic
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Plumbs Cross Roads have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plumbs Cross Roads
- Plumbs Cross Roads is located in Paulding County
- Dupont
(7 miles [11.3 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Dupont. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Dupont
- Dupont is located in Putnam County
- Population from the 2020 Census: 301 people
- Jump to TripAdvisor's Tourism page for Dupont <3>
- Rice
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Rice have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rice
- Rice is located in Putnam County
- Continue List (18 more) ...
- Dague ‑ Historic
(8 miles [12.9 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Dague. Although the coordinates have been estimated, they should be in the vicinity.<1>
- Jump to our Gazetteer entry for Dague
- Dague is located in Paulding County
- Continental
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Continental have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Continental
- Continental is located in Putnam County
- Population from the 2020 Census: 1,085 people
- Jump to TripAdvisor's Tourism page for Continental <3>
- Reids ‑ Historic
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Reids have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reids
- Reids is located in Paulding County
We've also created an expanded list of communities that existed in the 1890's and were located in the area around Canalport. See our List of 1890's Communities around Canalport.
Newspapers Published in Canalport ...
An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).
To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.
Using information that we've taken from the Chronicling America website, we've identified 52 newspapers that have been published in the area around Canalport.
Although we're unaware of any newspapers that were published in the immediate area of Canalport, there are papers which were published within 24 miles [38.6 km]<4>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Canalport.
Websites to Help With Your Genealogy Research ...
When we do our genealogical research, we first visit the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.
To help you get started, the following links will take you to the pages that are relevant to Canalport:
- Websites specific to Ohio
- Pages specific to Paulding County
- Genealogy information for nearby counties
- Allen County
- Defiance County
- Fulton County
- Hancock County
- Henry County
- Putnam County
- Van Wert County
- Williams County
- Allen County
- DeKalb County
- Cemetery Information and Directories for Ohio
Off-the-Road Links ...
Unfortunately, we don't know of a website for Canalport. If you can help, please contact us through our Feedback Page.
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Canalport) to Point B.Our distance measurements begin at a specific point in Canalport. The point we use is located at these GPS coordinates - Latitude: 41.1173, Longitude: -84.4277 In this case, the coordinates for Canalport have been provided by the Geographic Names Information System (GNIS). |
<5> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<6> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Canalport, please let us know so that we can improve our accuracy. |