RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Allen County >> Bluffton >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Bluffton. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Bluffton.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Bluffton - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 50 communities listed:

  • Ada
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Ada have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ada
    • Ada is located in Hardin County
    • Population from the 2020 Census: 5,532 people
    • Jump to TripAdvisor's Tourism page for Ada <3>
  • Adrian
    (30 miles [48.3 km] to the east)
  • Alger
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Alger have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alger
    • Alger is located in Hardin County
    • Population from the 2020 Census: 835 people
    • Jump to TripAdvisor's Tourism page for Alger <3>
  • Arcadia
    (24 miles [38.6 km] to the northeast)
    • Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arcadia
    • Arcadia is located in Hancock County
    • Population from the 2020 Census: 587 people
    • Jump to TripAdvisor's Tourism page for Arcadia <3>
  • Arlington
    (12 miles [19.3 km] to the east)
    • Note: The GPS coordinates that we are using for Arlington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Arlington
    • Arlington is located in Hancock County
    • Population from the 2020 Census: 1,431 people
    • Jump to TripAdvisor's Tourism page for Arlington <3>
  • Beaverdam
    (6 miles [9.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Beaverdam have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Beaverdam
    • Beaverdam is located in Allen County
    • Population from the 2020 Census: 369 people
    • Jump to TripAdvisor's Tourism page for Beaverdam <3>
  • Bloomdale
    (25 miles [40.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bloomdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bloomdale
    • Bloomdale is located in Wood County
    • Population from the 2020 Census: 682 people
    • Jump to TripAdvisor's Tourism page for Bloomdale <3>
  • Carey
    (26 miles [41.8 km] to the east)
    • Jump to our Gazetteer entry for Carey
    • Carey is located in Wyandot County
    • Population from the 2020 Census: 3,540 people
    • Jump to TripAdvisor's Tourism page for Carey <3>
  • Columbus Grove
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Columbus Grove have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Columbus Grove
    • Columbus Grove is located in Putnam County
    • Population from the 2020 Census: 2,061 people
    • Jump to TripAdvisor's Tourism page for Columbus Grove <3>
  • Continental
    (24 miles [38.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Continental have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Continental
    • Continental is located in Putnam County
    • Population from the 2020 Census: 1,085 people
    • Jump to TripAdvisor's Tourism page for Continental <3>
  • Cridersville
    (21 miles [33.8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Cridersville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cridersville
    • Cridersville is located in Auglaize County
    • Population from the 2020 Census: 1,780 people
    • Jump to TripAdvisor's Tourism page for Cridersville <3>
  • Custar
    (27 miles [43.5 km] to the north)
    • Note: The GPS coordinates that we are using for Custar have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Custar
    • Custar is located in Wood County
    • Population from the 2020 Census: 184 people
    • Jump to TripAdvisor's Tourism page for Custar <3>
  • Cygnet
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Cygnet have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cygnet
    • Cygnet is located in Wood County
    • Population from the 2020 Census: 622 people
    • Jump to TripAdvisor's Tourism page for Cygnet <3>
  • Delphos
    (23 miles [37 km] to the west)
  • Deshler
    (21 miles [33.8 km] to the north)
  • Dola
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Dola have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dola
    • Dola is located in Hardin County
    • Jump to TripAdvisor's Tourism page for Dola <3>
  • Dunkirk
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Dunkirk have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dunkirk
    • Dunkirk is located in Hardin County
    • Population from the 2020 Census: 842 people
    • Jump to TripAdvisor's Tourism page for Dunkirk <3>
  • Dupont
    (24 miles [38.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Dupont have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dupont
    • Dupont is located in Putnam County
    • Population from the 2020 Census: 301 people
    • Jump to TripAdvisor's Tourism page for Dupont <3>
  • Findlay
    (16 miles [25.7 km] to the northeast)
  • Forest
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Forest have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Forest
    • Forest is located in Hardin County
    • Population from the 2020 Census: 1,444 people
    • Jump to TripAdvisor's Tourism page for Forest <3>
  • Fort Jennings
    (21 miles [33.8 km] to the west)
    • Note: The GPS coordinates that we are using for Fort Jennings have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fort Jennings
    • Fort Jennings is located in Putnam County
    • Population from the 2020 Census: 495 people
    • Jump to TripAdvisor's Tourism page for Fort Jennings <3>
  • Fostoria
    (30 miles [48.3 km] to the northeast)
  • Glandorf
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Glandorf have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Glandorf
    • Glandorf is located in Putnam County
    • Population from the 2020 Census: 1,030 people
    • Jump to TripAdvisor's Tourism page for Glandorf <3>
  • Gomer
    (15 miles [24.1 km] to the west)
    • Note: The GPS coordinates that we are using for Gomer have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gomer
    • Gomer is located in Allen County
    • Jump to TripAdvisor's Tourism page for Gomer <3>
  • Hamler
    (24 miles [38.6 km] to the north)
  • Harrod
    (13 miles [20.9 km] to the south)
  • Holgate
    (27 miles [43.5 km] to the northwest)
  • Jenera
    (8 miles [12.9 km] to the east)
  • Kalida
    (17 miles [27.4 km] to the west)
    • Note: The GPS coordinates that we are using for Kalida have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kalida
    • Kalida is located in Putnam County
    • Population from the 2020 Census: 1,583 people
    • Jump to TripAdvisor's Tourism page for Kalida <3>
  • Kenton
    (22 miles [35.4 km] to the southeast)
  • Kirby
    (25 miles [40.2 km] to the east)
    • Note: The GPS coordinates that we are using for Kirby have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Kirby
    • Kirby is located in Wyandot County
    • Population from the 2020 Census: 112 people
    • Jump to TripAdvisor's Tourism page for Kirby <3>
  • Lafayette
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Lafayette have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lafayette
    • Lafayette is located in Allen County
    • Population from the 2020 Census: 418 people
    • Jump to TripAdvisor's Tourism page for Lafayette <3>
  • Lakeview
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Lakeview have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lakeview
    • Lakeview is located in Logan County
    • Population from the 2020 Census: 1,105 people
    • Jump to TripAdvisor's Tourism page for Lakeview <3>
  • Leipsic
    (14 miles [22.5 km] to the north)
  • Lima
    (15 miles [24.1 km] to the southwest)
    • Jump to our Gazetteer entry for Lima
    • Lima is located in Allen County
    • Population from the 2020 Census: 36,440 people
    • Jump to TripAdvisor's Tourism page for Lima <3>
  • Malinta
    (30 miles [48.3 km] to the north)
    • Note: The GPS coordinates that we are using for Malinta have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Malinta
    • Malinta is located in Henry County
    • Population from the 2020 Census: 252 people
    • Jump to TripAdvisor's Tourism page for Malinta <3>
  • McComb
    (15 miles [24.1 km] to the north)
    • Note: The GPS coordinates that we are using for McComb have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for McComb
    • McComb is located in Hancock County
    • Population from the 2020 Census: 1,632 people
    • Jump to TripAdvisor's Tourism page for McComb <3>
  • Middle Point
    (29 miles [46.7 km] to the west)
    • Note: The GPS coordinates that we are using for Middle Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Middle Point
    • Middle Point is located in Van Wert County
    • Population from the 2020 Census: 557 people
    • Jump to TripAdvisor's Tourism page for Middle Point <3>
  • Miller City
    (19 miles [30.6 km] to the northwest)
    • Note: The GPS coordinates that we are using for Miller City have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Miller City
    • Miller City is located in Putnam County
    • Population from the 2020 Census: 138 people
    • Jump to TripAdvisor's Tourism page for Miller City <3>
  • Mount Blanchard
    (17 miles [27.4 km] to the east)
    • Note: The GPS coordinates that we are using for Mount Blanchard have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Blanchard
    • Mount Blanchard is located in Hancock County
    • Population from the 2020 Census: 478 people
    • Jump to TripAdvisor's Tourism page for Mount Blanchard <3>
  • New Hampshire
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for New Hampshire have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for New Hampshire
    • New Hampshire is located in Auglaize County
    • Jump to TripAdvisor's Tourism page for New Hampshire <3>
  • North Baltimore
    (22 miles [35.4 km] to the northeast)
  • Ottawa
    (11 miles [17.7 km] to the northwest)
  • Ottoville
    (23 miles [37 km] to the west)
    • Note: The GPS coordinates that we are using for Ottoville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ottoville
    • Ottoville is located in Putnam County
    • Population from the 2020 Census: 960 people
    • Jump to TripAdvisor's Tourism page for Ottoville <3>
  • Rawson
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Rawson have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rawson
    • Rawson is located in Hancock County
    • Population from the 2020 Census: 552 people
    • Jump to TripAdvisor's Tourism page for Rawson <3>
  • Roundhead
    (23 miles [37 km] to the south)
    • Note: The GPS coordinates that we are using for Roundhead have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roundhead
    • Roundhead is located in Hardin County
    • Jump to TripAdvisor's Tourism page for Roundhead <3>
  • Russells Point
    (29 miles [46.7 km] to the south)
    • Note: The GPS coordinates that we are using for Russells Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Russells Point
    • Russells Point is located in Logan County
    • Population from the 2020 Census: 1,378 people
    • Jump to TripAdvisor's Tourism page for Russells Point <3>
  • Spencerville
    (27 miles [43.5 km] to the southwest)
  • Van Buren
    (21 miles [33.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Van Buren have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Van Buren
    • Van Buren is located in Hancock County
    • Population from the 2020 Census: 538 people
    • Jump to TripAdvisor's Tourism page for Van Buren <3>
  • Wapakoneta
    (27 miles [43.5 km] to the southwest)

Unfortunately, we don't know of an official website for Bluffton. If you can help, please contact us through our Feedback Page.

The official website for Allen County: www.co.allen.oh.us/

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Bluffton) to Point B.Our distance measurements begin at a specific point in Bluffton. The point we use is located at these GPS coordinates - Latitude: 40.8947, Longitude: -83.8902    
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024