Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Berwick had a population of 168 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Berwick, with the one closest to Berwick listed first.
- New Riegel
(Less than 2 miles to the northwest)
- Adrian
(2 miles [3.2 km] to the southwest)
- McCutchenville
(3 miles [4.8 km] to the southeast)
- Tymochtee
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Tymochtee have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tymochtee
- Tymochtee is located in Wyandot County
- Alvada
(5 miles [8 km] to the west)
- Carey
(6 miles [9.7 km] to the southwest)
- Mexico
(6 miles [9.7 km] to the southeast)
- Crawford
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Crawford have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Crawford
- Crawford is located in Wyandot County
- Bascom
(7 miles [11.3 km] to the north)
- Belle Vernon
(8 miles [12.9 km] to the southeast)
- Sycamore
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Sycamore have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Sycamore
- Sycamore is located in Wyandot County
- Population from the 2020 Census: 811 people
- Tiffin
(8 miles [12.9 km] to the northeast)
- West Independence
(8 miles [12.9 km] to the northwest)
- Lovell
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Lovell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lovell
- Lovell is located in Wyandot County
- Melmore
(9 miles [14.5 km] to the east)
- Vanlue
(10 miles [16.1 km] to the west)
- Fostoria
(10 miles [16.1 km] to the northwest)
- Deunquat
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Deunquat have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deunquat
- Deunquat is located in Wyandot County
- Plankton
(11 miles [17.7 km] to the southeast)
- Note: The GPS coordinates that we are using for Plankton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Plankton
- Plankton is located in Crawford County
- Swander
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Swander have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Swander
- Swander is located in Seneca County
- Cromers
(11 miles [17.7 km] to the north)
- Angus
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Angus have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Angus
- Angus is located in Seneca County
- Seal
(12 miles [19.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Seal have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Seal
- Seal is located in Wyandot County
- Arcadia
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Hancock County
- Population from the 2020 Census: 587 people
- Jump to TripAdvisor's Tourism page for Arcadia <2>
- Pratts
(13 miles [20.9 km] to the southwest)
- Note: The GPS coordinates that we are using for Pratts have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pratts
- Pratts is located in Hancock County
- Upper Sandusky
(13 miles [20.9 km] to the south)
- Rockaway
(13 miles [20.9 km] to the east)
- Note: The GPS coordinates that we are using for Rockaway have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockaway
- Rockaway is located in Seneca County
- Maple Grove
(13 miles [20.9 km] to the north)
- Linden ‑ Historic
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Linden have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linden
- Linden is located in Seneca County
- Amsden
(13 miles [20.9 km] to the north)
- Note: The GPS coordinates that we are using for Amsden have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Amsden
- Amsden is located in Seneca County
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Berwick, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |