RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Ohio >> Knox County >> Batemantown >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
Ohio

The Commemorative Quarter for Ohio





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Batemantown in the Atlas, the following communities of the 1890's would have been found near the current location of Batemantown. The following communities are listed based on their distance, with the one closest to Batemantown listed first.

  • Bangorville
    (3 miles [4.8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Bangorville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bangorville
    • Bangorville is located in Richland County
  • Fredericktown
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Fredericktown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fredericktown
    • Fredericktown is located in Knox County
    • Population from the 2020 Census: 2,526 people
    • Jump to TripAdvisor's Tourism page for Fredericktown <3>
  • Ankenytown
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Ankenytown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ankenytown
    • Ankenytown is located in Knox County
  • Darlington
    (4 miles [6.4 km] to the north)
    • Note: The GPS coordinates that we are using for Darlington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Darlington
    • Darlington is located in Richland County
  • Chesterville
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Chesterville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chesterville
    • Chesterville is located in Morrow County
    • Population from the 2020 Census: 234 people
    • Jump to TripAdvisor's Tourism page for Chesterville <3>
  • Pulaskiville
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Pulaskiville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pulaskiville
    • Pulaskiville is located in Morrow County
  • Bellville
    (7 miles [11.3 km] to the northeast)
    • Jump to our Gazetteer entry for Bellville
    • Bellville is located in Richland County
    • Population from the 2020 Census: 1,935 people
    • Bellville has also been known as:
    • McClures Settlement
    • McClure
    • Jump to TripAdvisor's Tourism page for Bellville <3>
  • North Liberty
    (9 miles [14.5 km] to the east)
    • Jump to our Gazetteer entry for North Liberty
    • North Liberty is located in Knox County
  • Sparta
    (10 miles [16.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Sparta have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sparta
    • Sparta is located in Morrow County
    • Population from the 2020 Census: 160 people
    • Jump to TripAdvisor's Tourism page for Sparta <3>
  • Mount Vernon
    (10 miles [16.1 km] to the southeast)
  • Butler
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Butler have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Butler
    • Butler is located in Richland County
    • Population from the 2020 Census: 897 people
    • Jump to TripAdvisor's Tourism page for Butler <3>
  • Lexington
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Lexington have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lexington
    • Lexington is located in Richland County
    • Population from the 2020 Census: 4,695 people
    • Jump to TripAdvisor's Tourism page for Lexington <3>
  • Steam Corners
    (11 miles [17.7 km] to the north)
    • Note: The GPS coordinates that we are using for Steam Corners have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Steam Corners
    • Steam Corners is located in Morrow County
  • Hastings
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Hastings have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hastings
    • Hastings is located in Richland County
  • Fulton
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Fulton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fulton
    • Fulton is located in Morrow County
    • Population from the 2020 Census: 251 people
    • Jump to TripAdvisor's Tourism page for Fulton <3>
  • Mount Liberty
    (12 miles [19.3 km] to the south)
    • Jump to our Gazetteer entry for Mount Liberty
    • Mount Liberty is located in Knox County
  • Bangs
    (12 miles [19.3 km] to the south)
    • Jump to our Gazetteer entry for Bangs
    • Bangs is located in Knox County
  • Mount Gilead
    (12 miles [19.3 km] to the west)
    • Note: The GPS coordinates that we are using for Mount Gilead have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Gilead
    • Mount Gilead is located in Morrow County
    • Population from the 2020 Census: 3,687 people
    • Jump to TripAdvisor's Tourism page for Mount Gilead <3>
  • Bloomfield
    (13 miles [20.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Bloomfield have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bloomfield
    • Bloomfield is located in Morrow County
  • Newville
    (13 miles [20.9 km] to the northeast)
    • Jump to our Gazetteer entry for Newville
    • Newville is located in Richland County
  • Marengo
    (14 miles [22.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Marengo have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marengo
    • Marengo is located in Morrow County
    • Population from the 2020 Census: 341 people
    • Jump to TripAdvisor's Tourism page for Marengo <3>
  • Milfordton
    (14 miles [22.5 km] to the south)
    • Note: The GPS coordinates that we are using for Milfordton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milfordton
    • Milfordton is located in Knox County
  • Gambier
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Gambier have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gambier
    • Gambier is located in Knox County
    • Population from the 2020 Census: 2,502 people
    • Jump to TripAdvisor's Tourism page for Gambier <3>
  • Monroe Mills
    (14 miles [22.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Monroe Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Monroe Mills
    • Monroe Mills is located in Knox County
  • Surprise ‑ Historic
    (14 miles [22.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Surprise have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Surprise
    • Surprise is located in Morrow County
  • Edison
    (14 miles [22.5 km] to the west)
    • Note: The GPS coordinates that we are using for Edison have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edison
    • Edison is located in Morrow County
    • Population from the 2020 Census: 444 people
    • Jump to TripAdvisor's Tourism page for Edison <3>

The official website for Knox County: www.knoxcountyohio.org/

The official website for State of Ohio: https://ohio.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Batemantown, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024