Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Bascom had a population of 214 people in 1895 with a post office and railroad service.
The following communities are listed based on their distance from Bascom, with the one closest to Bascom listed first.
- Angus
(4 miles [6.4 km] to the north)
- Note: The GPS coordinates that we are using for Angus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Angus
- Angus is located in Seneca County
- New Riegel
(5 miles [8 km] to the south)
- Tiffin
(5 miles [8 km] to the east)
- Cromers
(5 miles [8 km] to the northeast)
- Amsden
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Amsden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Amsden
- Amsden is located in Seneca County
- Maple Grove
(6 miles [9.7 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Maple Grove. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Maple Grove
- Maple Grove is located in Seneca County
- Google driving directions:
- From your current location to Maple Grove
- From Bascom to Maple Grove
- Linden ‑ Historic
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Linden have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Linden
- Linden is located in Seneca County
- Fostoria
(6 miles [9.7 km] to the west)
- Berwick
(7 miles [11.3 km] to the south)
- Kansas
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Kansas have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kansas
- Kansas is located in Seneca County
- West Independence
(8 miles [12.9 km] to the southwest)
- Alvada
(8 miles [12.9 km] to the southwest)
- Fort Seneca
(8 miles [12.9 km] to the northeast)
- Bettsville
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Bettsville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bettsville
- Bettsville is located in Seneca County
- Population from the 2020 Census: 618 people
- Jump to TripAdvisor's Tourism page for Bettsville <3>
- Adrian
(9 miles [14.5 km] to the south)
- McCutchenville
(9 miles [14.5 km] to the south)
- Burgoon
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Burgoon have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burgoon
- Burgoon is located in Sandusky County
- Population from the 2020 Census: 163 people
- Swander
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for Swander have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Swander
- Swander is located in Seneca County
- Watson
(10 miles [16.1 km] to the northeast)
- Old Fort
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Old Fort have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Old Fort
- Old Fort is located in Seneca County
- Mexico
(11 miles [17.7 km] to the southeast)
- Melmore
(11 miles [17.7 km] to the southeast)
- Risingsun
(11 miles [17.7 km] to the northwest)
- Tymochtee
(12 miles [19.3 km] to the south)
- Note: The GPS coordinates that we are using for Tymochtee have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tymochtee
- Tymochtee is located in Wyandot County
- Rockaway
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Rockaway have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rockaway
- Rockaway is located in Seneca County
- Millersville
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Millersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Millersville
- Millersville is located in Sandusky County
- Hatton
(12 miles [19.3 km] to the northwest)
- Note: The GPS coordinates that we are using for Hatton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hatton
- Hatton is located in Wood County
- Tinney
(12 miles [19.3 km] to the north)
- Note: The GPS coordinates that we are using for Tinney have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tinney
- Tinney is located in Sandusky County
- Arcadia
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Arcadia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Arcadia
- Arcadia is located in Hancock County
- Population from the 2020 Census: 587 people
- Jump to TripAdvisor's Tourism page for Arcadia <3>
Off-the-Road Links ...
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Bascom, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |