Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that in 1895, Alice had a post office and no railroad service.
The following communities are listed based on their distance from Alice, with the one closest to Alice listed first.
- Durgan
(Less than 2 miles to the south)
- Note: The GPS coordinates that we are using for Durgan have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Durgan
- Durgan is located in Gallia County
- Ewington
(Less than 2 miles to the southeast)
- Edna ‑ Historic
(3 miles [4.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Edna have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Edna
- Edna is located in Gallia County
- Vinton
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Vinton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vinton
- Vinton is located in Gallia County
- Population from the 2020 Census: 208 people
- Jump to TripAdvisor's Tourism page for Vinton <3>
- Minerton
(3 miles [4.8 km] to the northwest)
- Note: The GPS coordinates that we are using for Minerton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minerton
- Minerton is located in Vinton County
- Rowlesville
(4 miles [6.4 km] to the east)
- Note: The GPS coordinates that we are using for Rowlesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rowlesville
- Rowlesville is located in Gallia County
- Wilkesville
(4 miles [6.4 km] to the northeast)
- Salem Center
(5 miles [8 km] to the east)
- Note: The GPS coordinates that we are using for Salem Center have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Salem Center
- Salem Center is located in Meigs County
- Orpheus
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Orpheus have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Orpheus
- Orpheus is located in Jackson County
- Hawks
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Hawks have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hawks
- Hawks is located in Vinton County
- Radcliff
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Radcliff have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Radcliff
- Radcliff is located in Vinton County
- Porter
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Porter have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Porter
- Porter is located in Gallia County
- Eno
(8 miles [12.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Eno have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Eno
- Eno is located in Gallia County
- Hanesville
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Hanesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hanesville
- Hanesville is located in Meigs County
- Rocky Hill
(9 miles [14.5 km] to the west)
- Note: The GPS coordinates that we are using for Rocky Hill have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rocky Hill
- Rocky Hill is located in Jackson County
- Oreton
(9 miles [14.5 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Oreton. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Oreton
- Oreton is located in Vinton County
- Google driving directions:
- From your current location to Oreton
- From Alice to Oreton
- Rempel
(9 miles [14.5 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Rempel. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rempel
- Rempel is located in Jackson County
- Google driving directions:
- From your current location to Rempel
- From Alice to Rempel
- Thurman
(9 miles [14.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Thurman have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thurman
- Thurman is located in Gallia County
- Rio Grande
(9 miles [14.5 km] to the south)
- Dexter
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Dexter. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Dexter
- Dexter is located in Meigs County
- Google driving directions:
- From your current location to Dexter
- From Alice to Dexter
- Point Rock
(9 miles [14.5 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Point Rock. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Point Rock
- Point Rock is located in Meigs County
- Google driving directions:
- From your current location to Point Rock
- From Alice to Point Rock
- Evergreen
(10 miles [16.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Evergreen have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Evergreen
- Evergreen is located in Gallia County
- Langsville
(10 miles [16.1 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Langsville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Langsville
- Langsville is located in Meigs County
- Google driving directions:
- From your current location to Langsville
- From Alice to Langsville
- Dyesville
(10 miles [16.1 km] to the northeast)
- Note: The GPS coordinates that we are using for Dyesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dyesville
- Dyesville is located in Meigs County
- Arbaugh
(10 miles [16.1 km] to the north)
- Note: We haven't been able to verify our GPS coordinates for Arbaugh. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Arbaugh
- Arbaugh is located in Vinton County
- Google driving directions:
- From your current location to Arbaugh
- From Alice to Arbaugh
- Wellston
(10 miles [16.1 km] to the northwest)
Off-the-Road Links ...
The official website for Gallia County: www.gallianet.net/
The official website for State of Ohio: https://ohio.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Alice, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |