RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of New York >> Cortland County >> Riverside Manor >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
New York

The Commemorative Quarter for New York





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Riverside Manor in the Atlas, the following communities of the 1890's would have been found near the current location of Riverside Manor. The following communities are listed based on their distance, with the one closest to Riverside Manor listed first.

  • Messengerville
    (Less than 2 miles to the south)
    • Note: The GPS coordinates that we are using for Messengerville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Messengerville
    • Messengerville is located in Cortland County
  • East Virgil
    (Less than 2 miles to the west)
    • Note: The GPS coordinates that we are using for East Virgil have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Virgil
    • East Virgil is located in Cortland County
  • Freetown Corners
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Freetown Corners have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Freetown Corners
    • Freetown Corners is located in Cortland County
  • Marathon
    (4 miles [6.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Marathon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Marathon
    • Marathon is located in Cortland County
    • Population from the 2020 Census: 853 people
    • Jump to TripAdvisor's Tourism page for Marathon <3>
  • Hunts Corners
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Hunts Corners have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hunts Corners
    • Hunts Corners is located in Cortland County
  • Blodgett Mills
    (5 miles [8 km] to the northwest)
    • Note: The GPS coordinates that we are using for Blodgett Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Blodgett Mills
    • Blodgett Mills is located in Cortland County
    • Jump to TripAdvisor's Tourism page for Blodgett Mills <3>
  • Texas Valley
    (5 miles [8 km] to the east)
    • Note: The GPS coordinates that we are using for Texas Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Texas Valley
    • Texas Valley is located in Cortland County
  • East Freetown
    (6 miles [9.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for East Freetown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Freetown
    • East Freetown is located in Cortland County
  • Virgil
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Virgil have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Virgil
    • Virgil is located in Cortland County
    • Jump to TripAdvisor's Tourism page for Virgil <3>
  • Killawog
    (7 miles [11.3 km] to the southeast)
  • Solon
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Solon have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Solon
    • Solon is located in Cortland County
  • Harford Mills
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Harford Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Harford Mills
    • Harford Mills is located in Cortland County
  • Willet
    (8 miles [12.9 km] to the east)
    • Note: The GPS coordinates that we are using for Willet have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Willet
    • Willet is located in Cortland County
    • Jump to TripAdvisor's Tourism page for Willet <3>
  • South Cortland
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for South Cortland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Cortland
    • South Cortland is located in Cortland County
  • Harford
    (9 miles [14.5 km] to the southwest)
  • Center Lisle
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Center Lisle have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Center Lisle
    • Center Lisle is located in Broome County
  • Upper Lisle
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Upper Lisle have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Upper Lisle
    • Upper Lisle is located in Broome County
  • Cincinnatus
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for Cincinnatus have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cincinnatus
    • Cincinnatus is located in Cortland County
    • Jump to TripAdvisor's Tourism page for Cincinnatus <3>
  • Taylor Valley
    (9 miles [14.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Taylor Valley have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Taylor Valley
    • Taylor Valley is located in Cortland County
  • Cortland
    (9 miles [14.5 km] to the northwest)
  • East River
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for East River have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East River
    • East River is located in Cortland County
  • Lisle
    (10 miles [16.1 km] to the south)
  • Penelope
    (10 miles [16.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Penelope have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Penelope
    • Penelope is located in Broome County
  • Taylor
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Taylor have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Taylor
    • Taylor is located in Cortland County
  • Richford
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Richford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Richford
    • Richford is located in Tioga County
    • Jump to TripAdvisor's Tourism page for Richford <3>
  • Homer
    (11 miles [17.7 km] to the northwest)
    • Jump to our Gazetteer entry for Homer
    • Homer is located in Cortland County
    • Population from the 2020 Census: 3,080 people
    • Jump to TripAdvisor's Tourism page for Homer <3>
  • Taylor Center
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Taylor Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Taylor Center
    • Taylor Center is located in Cortland County
  • East Homer
    (11 miles [17.7 km] to the north)
    • Jump to our Gazetteer entry for East Homer
    • East Homer is located in Cortland County
  • McLean
    (11 miles [17.7 km] to the west)
  • Dryden
    (11 miles [17.7 km] to the west)
    • Note: The GPS coordinates that we are using for Dryden have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dryden
    • Dryden is located in Tompkins County
    • Population from the 2020 Census: 1,996 people
    • Jump to TripAdvisor's Tourism page for Dryden <3>

The official website for Cortland County: www.cortland-co.org/

The official website for State of New York: https://www.ny.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Riverside Manor, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Oct 2024