Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Perth had a population of 158 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Perth, with the one closest to Perth listed first.
- Broadalbin
(2 miles [3.2 km] to the north)
- Note: The GPS coordinates that we are using for Broadalbin have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Broadalbin
- Broadalbin is located in Fulton County
- Population from the 2020 Census: 1,260 people
- Jump to TripAdvisor's Tourism page for Broadalbin <3>
- Fort Johnson
(4 miles [6.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Fort Johnson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Johnson
- Fort Johnson is located in Montgomery County
- Population from the 2020 Census: 463 people
- Jump to TripAdvisor's Tourism page for Fort Johnson <3>
- Rockton
(4 miles [6.4 km] to the south)
- Mills Corners
(4 miles [6.4 km] to the northeast)
- Amsterdam
(5 miles [8 km] to the south)
- Munsonville
(5 miles [8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Munsonville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Munsonville
- Munsonville is located in Fulton County
- Google driving directions:
- From your current location to Munsonville
- From Perth to Munsonville
- Union Mills
(5 miles [8 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Union Mills. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Union Mills
- Union Mills is located in Fulton County
- Google driving directions:
- From your current location to Union Mills
- From Perth to Union Mills
- Tribes Hill
(6 miles [9.7 km] to the southwest)
- Fort Hunter
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Fort Hunter have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Hunter
- Fort Hunter is located in Montgomery County
- Jump to TripAdvisor's Tourism page for Fort Hunter <3>
- Mayfield
(6 miles [9.7 km] to the northwest)
- Hagedorns Mills
(6 miles [9.7 km] to the northeast)
- North Broadalbin
(6 miles [9.7 km] to the north)
- Cranesville
(7 miles [11.3 km] to the southeast)
- North Galway
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for North Galway have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Galway
- North Galway is located in Saratoga County
- Benedict
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Benedict have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Benedict
- Benedict is located in Fulton County
- Gloversville
(7 miles [11.3 km] to the west)
- Auriesville
(8 miles [12.9 km] to the southwest)
- Galway
(8 miles [12.9 km] to the east)
- Note: The GPS coordinates that we are using for Galway have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Galway
- Galway is located in Saratoga County
- Population from the 2020 Census: 192 people
- Jump to TripAdvisor's Tourism page for Galway <3>
- Kingsboro
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Kingsboro have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kingsboro
- Kingsboro is located in Fulton County
- Johnstown
(8 miles [12.9 km] to the west)
- Minaville
(9 miles [14.5 km] to the south)
- Note: The GPS coordinates that we are using for Minaville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Minaville
- Minaville is located in Montgomery County
- Glenville
(9 miles [14.5 km] to the southeast)
- West Charlton
(9 miles [14.5 km] to the southeast)
- Mosherville
(9 miles [14.5 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Mosherville. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Mosherville
- Mosherville is located in Saratoga County
- Google driving directions:
- From your current location to Mosherville
- From Perth to Mosherville
- Barkersville
(9 miles [14.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Barkersville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barkersville
- Barkersville is located in Saratoga County
- Cranberry Creek
(9 miles [14.5 km] to the north)
Off-the-Road Links ...
The official website for Fulton County: www.fulton.ny.us/
The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Perth, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |