RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of New York >> Washington County >> Iron Furnace >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
New York

The Commemorative Quarter for New York





Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Iron Furnace in the Atlas, the following communities of the 1890's would have been found near the current location of Iron Furnace. The following communities are listed based on their distance, with the one closest to Iron Furnace listed first.

  • South Bay
    (2 miles [3.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for South Bay have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Bay
    • South Bay is located in Washington County
  • Cleverdale
    (5 miles [8 km] to the west)
    • Note: The GPS coordinates that we are using for Cleverdale have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cleverdale
    • Cleverdale is located in Warren County
    • Jump to TripAdvisor's Tourism page for Cleverdale <3>
  • Brayton
    (5 miles [8 km] to the southwest)
    • Jump to our Gazetteer entry for Brayton
    • Brayton is located in Warren County
  • Comstock
    (5 miles [8 km] to the southeast)
  • West Fort Ann
    (6 miles [9.7 km] to the south)
    • Note: The GPS coordinates that we are using for West Fort Ann have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Fort Ann
    • West Fort Ann is located in Washington County
  • Fort Ann
    (6 miles [9.7 km] to the southeast)
  • Bolton Landing
    (6 miles [9.7 km] to the northwest)
  • Bolton
    (6 miles [9.7 km] to the northwest)
    • Jump to our Gazetteer entry for Bolton
    • Bolton is located in Warren County
  • Whitehall
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Whitehall have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Whitehall
    • Whitehall is located in Washington County
    • Population from the 2020 Census: 2,517 people
    • Jump to TripAdvisor's Tourism page for Whitehall <3>
  • Queensbury
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Queensbury have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Queensbury
    • Queensbury is located in Warren County
    • Jump to TripAdvisor's Tourism page for Queensbury <3>
  • Pattens Mills
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Pattens Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pattens Mills
    • Pattens Mills is located in Washington County
  • Lake George
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lake George have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lake George
    • Lake George is located in Warren County
    • Population from the 2020 Census: 918 people
    • Jump to TripAdvisor's Tourism page for Lake George <3>
  • Kingsbury
    (9 miles [14.5 km] to the south)
    • Jump to our Gazetteer entry for Kingsbury
    • Kingsbury is located in Washington County
  • North Bolton
    (9 miles [14.5 km] to the northwest)
    • Jump to our Gazetteer entry for North Bolton
    • North Bolton is located in Warren County
  • North Granville
    (10 miles [16.1 km] to the east)
    • Jump to our Gazetteer entry for North Granville
    • North Granville is located in Washington County
  • Dresden Center
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Dresden Center have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Dresden Center
    • Dresden Center is located in Washington County
  • Huletts Landing
    (10 miles [16.1 km] to the north)
  • French Mountain
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for French Mountain have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for French Mountain
    • French Mountain is located in Warren County
  • Hartford
    (11 miles [17.7 km] to the southeast)
    • Jump to our Gazetteer entry for Hartford
    • Hartford is located in Washington County
  • Truthville
    (11 miles [17.7 km] to the east)
    • Jump to our Gazetteer entry for Truthville
    • Truthville is located in Washington County
  • Chubbs Dock
    (11 miles [17.7 km] to the northeast)
    • Note: The GPS coordinates that we are using for Chubbs Dock have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Chubbs Dock
    • Chubbs Dock is located in Washington County
  • Warrensburg
    (11 miles [17.7 km] to the west)
  • Adamsville
    (12 miles [19.3 km] to the south)
    • Jump to our Gazetteer entry for Adamsville
    • Adamsville is located in Washington County
  • South Hartford
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for South Hartford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Hartford
    • South Hartford is located in Washington County
  • Slyboro
    (12 miles [19.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Slyboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Slyboro
    • Slyboro is located in Washington County
  • Sabbath Day Point
    (12 miles [19.3 km] to the north)
    • Note: The GPS coordinates that we are using for Sabbath Day Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sabbath Day Point
    • Sabbath Day Point is located in Warren County

The official website for Washington County: www.co.washington.ny.us

The official website for State of New York: https://www.ny.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Iron Furnace, please let us know so that we can improve our accuracy.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024