Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Fort Ann had a population of 977 people in 1895 with a post office and railroad service. In 2020, Fort Ann had a population of 463 people.
The following communities are listed based on their distance from Fort Ann, with the one closest to Fort Ann listed first.
- Comstock
(3 miles [4.8 km] to the northeast)
- Kingsbury
(4 miles [6.4 km] to the southwest)
- West Fort Ann
(4 miles [6.4 km] to the west)
- Note: The GPS coordinates that we are using for West Fort Ann have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Fort Ann
- West Fort Ann is located in Washington County
- Hartford
(5 miles [8 km] to the southeast)
- Pattens Mills
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Pattens Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pattens Mills
- Pattens Mills is located in Washington County
- Queensbury
(6 miles [9.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Queensbury have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Queensbury
- Queensbury is located in Warren County
- Jump to TripAdvisor's Tourism page for Queensbury <2>
- Adamsville
(6 miles [9.7 km] to the south)
- South Hartford
(6 miles [9.7 km] to the southeast)
- East Hartford
(7 miles [11.3 km] to the southeast)
- Slyboro
(7 miles [11.3 km] to the east)
- Note: The GPS coordinates that we are using for Slyboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Slyboro
- Slyboro is located in Washington County
- North Granville
(7 miles [11.3 km] to the east)
- Brayton
(7 miles [11.3 km] to the west)
- South Bay
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for South Bay have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Bay
- South Bay is located in Washington County
- Truthville
(8 miles [12.9 km] to the east)
- Cleverdale
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Cleverdale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cleverdale
- Cleverdale is located in Warren County
- Jump to TripAdvisor's Tourism page for Cleverdale <2>
- Glens Falls
(10 miles [16.1 km] to the southwest)
- South Glens Falls
(10 miles [16.1 km] to the southwest)
- North Argyle
(10 miles [16.1 km] to the south)
- Note: The GPS coordinates that we are using for North Argyle have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Argyle
- North Argyle is located in Washington County
- Belcher
(10 miles [16.1 km] to the southeast)
- North Hebron
(10 miles [16.1 km] to the southeast)
- South Granville
(10 miles [16.1 km] to the east)
- Note: The GPS coordinates that we are using for South Granville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Granville
- South Granville is located in Washington County
- Middle Granville
(10 miles [16.1 km] to the east)
- Whitehall
(10 miles [16.1 km] to the north)
- Note: The GPS coordinates that we are using for Whitehall have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitehall
- Whitehall is located in Washington County
- Population from the 2020 Census: 2,517 people
- Jump to TripAdvisor's Tourism page for Whitehall <2>
- French Mountain
(11 miles [17.7 km] to the west)
- Note: The GPS coordinates that we are using for French Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for French Mountain
- French Mountain is located in Warren County
- Fort Edward
(11 miles [17.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Fort Edward have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Edward
- Fort Edward is located in Washington County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Fort Edward <2>
- Granville
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Granville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Granville
- Granville is located in Washington County
- Population from the 2020 Census: 2,416 people
- Jump to TripAdvisor's Tourism page for Granville <2>
- Raceville
(11 miles [17.7 km] to the east)
- Note: The GPS coordinates that we are using for Raceville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Raceville
- Raceville is located in Washington County
- Lake George
(11 miles [17.7 km] to the west)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Fort Ann. If you can help, please contact us through our Feedback Page.
The official website for Washington County: www.co.washington.ny.us
The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Fort Ann, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |