Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Colosse had a population of 137 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Colosse, with the one closest to Colosse listed first.
- Parish
(Less than 2 miles to the southeast)- Jump to our Gazetteer entry for Parish
- Parish is located in Oswego County
- Population from the 2020 Census: 424 people
- Jump to TripAdvisor's Tourism page for Parish <2>
- Prattham
(2 miles [3.2 km] to the northwest)- Jump to our Gazetteer entry for Prattham
- Prattham is located in Oswego County
- Hastings
(3 miles [4.8 km] to the south)- Jump to our Gazetteer entry for Hastings
- Hastings is located in Oswego County
- Jump to TripAdvisor's Tourism page for Hastings <2>
- Morse
(3 miles [4.8 km] to the south) - Dugway
(4 miles [6.4 km] to the northeast) - Mexico
(4 miles [6.4 km] to the northwest)- Jump to our Gazetteer entry for Mexico
- Mexico is located in Oswego County
- Population from the 2020 Census: 1,510 people
- Jump to TripAdvisor's Tourism page for Mexico <2>
- Little France
(5 miles [8 km] to the southeast)- Note: The GPS coordinates that we are using for Little France have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Little France
- Little France is located in Oswego County
- Vermilion
(5 miles [8 km] to the west) - Clifford
(6 miles [9.7 km] to the southwest) - East Palermo
(6 miles [9.7 km] to the southwest)- Note: The GPS coordinates that we are using for East Palermo have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Palermo
- East Palermo is located in Oswego County
- Arthur
(6 miles [9.7 km] to the northwest) - Palermo
(7 miles [11.3 km] to the southwest) - Hastings Center
(7 miles [11.3 km] to the south)- Note: The GPS coordinates that we are using for Hastings Center have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hastings Center
- Hastings Center is located in Oswego County
- Mallory
(7 miles [11.3 km] to the south)- Jump to our Gazetteer entry for Mallory
- Mallory is located in Oswego County
- Jump to TripAdvisor's Tourism page for Mallory <2>
- Texas
(7 miles [11.3 km] to the northwest) - Daysville
(7 miles [11.3 km] to the north) - New Haven
(8 miles [12.9 km] to the northwest) - North Volney
(8 miles [12.9 km] to the west)- Note: The GPS coordinates that we are using for North Volney have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Volney
- North Volney is located in Oswego County
- Central Square
(9 miles [14.5 km] to the south)- Note: The GPS coordinates that we are using for Central Square have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Central Square
- Central Square is located in Oswego County
- Population from the 2020 Census: 1,735 people
- Jump to TripAdvisor's Tourism page for Central Square <2>
- North Constantia
(9 miles [14.5 km] to the southeast)- Note: The GPS coordinates that we are using for North Constantia have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Constantia
- North Constantia is located in Oswego County
- West Amboy
(9 miles [14.5 km] to the east)- Note: The GPS coordinates that we are using for West Amboy have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for West Amboy
- West Amboy is located in Oswego County
- Caughdenoy
(10 miles [16.1 km] to the south)- Jump to our Gazetteer entry for Caughdenoy
- Caughdenoy is located in Oswego County
- West Monroe
(10 miles [16.1 km] to the southeast)- Jump to our Gazetteer entry for West Monroe
- West Monroe is located in Oswego County
- Gayville
(10 miles [16.1 km] to the southeast)- Jump to our Gazetteer entry for Gayville
- Gayville is located in Oswego County
- Pulaski
(10 miles [16.1 km] to the north)- Jump to our Gazetteer entry for Pulaski
- Pulaski is located in Oswego County
- Population from the 2020 Census: 2,212 people
- Jump to TripAdvisor's Tourism page for Pulaski <2>
- South New Haven
(10 miles [16.1 km] to the west)- Note: The GPS coordinates that we are using for South New Haven have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South New Haven
- South New Haven is located in Oswego County
- Port Ontario
(10 miles [16.1 km] to the north)- Note: The GPS coordinates that we are using for Port Ontario have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Ontario
- Port Ontario is located in Oswego County
Off-the-Road Links ...
The official website for Oswego County: www.co.oswego.ny.us/
The official website for State of New York: https://www.ny.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Colosse, please let us know so that we can improve our accuracy. |
| <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |