|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Stoddard Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Stoddard Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Stoddard Cemetery (FG ID #2397961). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Stoddard Cemetery. We've listed the following communities based on their distance, with the closest first.
- Castle Creek
(Less than 2 miles to the southwest)
- West Chenango
(4 miles [6.4 km] to the southwest)
- Glen Castle
(4 miles [6.4 km] to the south)
- Kattellville
(4 miles [6.4 km] to the southeast)
- New Ireland
(5 miles [8 km] to the southwest)
- Glen Aubrey
(5 miles [8 km] to the west)
- Hinmans Corners
(6 miles [9.7 km] to the south)
- Quinneville
(6 miles [9.7 km] to the east)
- Whitney Point
(6 miles [9.7 km] to the northwest)
- Triangle
(6 miles [9.7 km] to the north)
- Port Dickinson
(7 miles [11.3 km] to the south)
- Note: The GPS coordinates that we are using for Port Dickinson have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Port Dickinson
- Port Dickinson is located in Broome County
- Population from the 2020 Census: 1,510 people
- Greene
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Greene have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Greene
- Greene is located in Chenango County
- Population from the 2020 Census: 1,391 people
- Jump to TripAdvisor's Tourism page for Greene <4>
- Lisle
(8 miles [12.9 km] to the northwest)
- Maine
(9 miles [14.5 km] to the southwest)
- Johnson City
(9 miles [14.5 km] to the south)
- North Colesville
(9 miles [14.5 km] to the east)
- Upper Lisle
(10 miles [16.1 km] to the north)
- Binghamton
(10 miles [16.1 km] to the south)
- Brookvale
(10 miles [16.1 km] to the southeast)
- Manningville
(10 miles [16.1 km] to the northwest)
- Ketchumville
(10 miles [16.1 km] to the west)
- Endwell
(11 miles [17.7 km] to the southwest)
- Willow Point
(11 miles [17.7 km] to the southwest)
- Smithville Flats
(11 miles [17.7 km] to the northeast)
- Endicott
(12 miles [19.3 km] to the southwest)
- Belden
(12 miles [19.3 km] to the east)
- Killawog
(12 miles [19.3 km] to the northwest)
Off-the-Road Links ...
The official website for Broome County: www.gobroomecounty.com/ The official website for State of New York: https://www.ny.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Stoddard Cemetery. The point we use is located at these GPS coordinates - Latitude: 42.2502, Longitude: -75.9012 |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|