|  | 
Nearby CommunitiesIntroductionBelow you will find our list of the communities that are in the vicinity of the State Prison & Hospital Cemetery. Just a reminder ... Since our focus is on geography, we don't have any burial or interment information.  Nor do we have any contact information for the State Prison & Hospital Cemetery. List of Neighboring Communities ...Below are the communities that are within 30 miles [48.3 km]<1> of the State Prison & Hospital Cemetery.  We've listed the following communities based on their distance, with the closest first. 
Dannemora(Less than 2 miles to the north)
Moffitsville(5 miles [8 km] to the south)
 
Jump to our Gazetteer entry for MoffitsvilleMoffitsville is located in Clinton CountyRedford(7 miles [11.3 km] to the southwest)
Morrisonville(7 miles [11.3 km] to the east)
West Plattsburgh(7 miles [11.3 km] to the east)
 
Jump to our Gazetteer entry for West PlattsburghWest Plattsburgh is located in Clinton CountyClayburg(9 miles [14.5 km] to the southwest)
 
Note: We haven't been able to verify our GPS coordinates for Clayburg.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for ClayburgClayburg is located in Clinton CountyWest Beekmantown(9 miles [14.5 km] to the northeast)
 
Note: We haven't been able to verify our GPS coordinates for West Beekmantown.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for West BeekmantownWest Beekmantown is located in Clinton CountyLyon Mountain(9 miles [14.5 km] to the west)
Beekmantown(11 miles [17.7 km] to the east)
 
Jump to our Gazetteer entry for BeekmantownBeekmantown is located in Clinton CountyStandish(11 miles [17.7 km] to the west)
 
Jump to our Gazetteer entry for StandishStandish is located in Clinton CountyPeru(12 miles [19.3 km] to the southeast)
Plattsburgh(12 miles [19.3 km] to the east)
Altona(12 miles [19.3 km] to the north)
 
Note: We haven't been able to verify our GPS coordinates for Altona.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for AltonaAltona is located in Clinton CountyJump to TripAdvisor's Tourism page for Altona <2>Laphams Mills(13 miles [20.9 km] to the southeast)
 
Note: We haven't been able to verify our GPS coordinates for Laphams Mills.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for Laphams MillsLaphams Mills is located in Clinton CountyParc(13 miles [20.9 km] to the east)
 
Note: The GPS coordinates that we are using for Parc have been provided by the GNIS.<4>  The coordinates still need to be verified.Jump to our Gazetteer entry for ParcParc is located in Clinton CountyEllenburg Center(13 miles [20.9 km] to the northwest)
Harkness(14 miles [22.5 km] to the southeast)
 
Jump to our Gazetteer entry for HarknessHarkness is located in Clinton CountyCumberland Head(15 miles [24.1 km] to the east)
 
Jump to our Gazetteer entry for Cumberland HeadCumberland Head is located in Clinton CountyIngraham(15 miles [24.1 km] to the northeast)
 
Note: We haven't been able to verify our GPS coordinates for Ingraham.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for IngrahamIngraham is located in Clinton CountySciola(15 miles [24.1 km] to the northeast)
 
Jump to our Gazetteer entry for SciolaSciola is located in Clinton CountyWoods Falls(15 miles [24.1 km] to the north)
 
Jump to our Gazetteer entry for Woods FallsWoods Falls is located in Clinton CountyHarrigan(15 miles [24.1 km] to the northwest)
 
Note: We haven't been able to verify our GPS coordinates for Harrigan.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for HarriganHarrigan is located in Clinton CountyThomasville(16 miles [25.7 km] to the south)
 
Jump to our Gazetteer entry for ThomasvilleThomasville is located in Clinton CountyPoint Au Roche(16 miles [25.7 km] to the east)
 
Note: We haven't been able to verify our GPS coordinates for Point Au Roche.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for Point Au RochePoint Au Roche is located in Clinton CountyAlder Brook(17 miles [27.4 km] to the southwest)
 
Note: We haven't been able to verify our GPS coordinates for Alder Brook.  Although the coordinates have been estimated, they should be in the vicinity.<3>Jump to our Gazetteer entry for Alder BrookAlder Brook is located in Franklin CountyBlack Brook(17 miles [27.4 km] to the south)
 
Jump to our Gazetteer entry for Black BrookBlack Brook is located in Clinton CountyAusable Chasm(17 miles [27.4 km] to the southeast)
 
Jump to our Gazetteer entry for Ausable ChasmAusable Chasm is located in Clinton CountyMooers Forks(17 miles [27.4 km] to the north)
 
Footnotes ...
| <1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance.  A straight line distance ignores  obstructions like rivers, canyons, lakes, et cetera - it's truly a line  drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the State Prison & Hospital Cemetery.  The point we use is located at these GPS coordinates - Latitude: 44.7073, Longitude: -73.7185        In this case, the coordinates for the State Prison & Hospital Cemetery have been provided by the Geographic Names Information System (GNIS). |  | <2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |  | <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates.  That said, we have some confidence that we have placed the marker near the actual location.  A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |  | <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS).  While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |  |  |