|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Mt. Pleasant Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Mt. Pleasant Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Mt. Pleasant Cemetery (FG ID #65365). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Mt. Pleasant Cemetery. We've listed the following communities based on their distance, with the closest first.
- New Salem
(Less than 2 miles to the west)
- New Scotland
(2 miles [3.2 km] to the east)
- Voorheesville
(2 miles [3.2 km] to the northeast)
- Clarksville
(3 miles [4.8 km] to the south)
- Meadowdale
(3 miles [4.8 km] to the northwest)
- Feura Bush
(4 miles [6.4 km] to the southeast)
- Slingerlands
(4 miles [6.4 km] to the east)
- Reidsville
(5 miles [8 km] to the southwest)
- Delmar
(5 miles [8 km] to the east)
- Guilderland
(5 miles [8 km] to the north)
- Hartmans Corners
(5 miles [8 km] to the north)
- Westmere
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Westmere have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Westmere
- Westmere is located in Albany County
- Altamont
(6 miles [9.7 km] to the northwest)
- East Berne
(6 miles [9.7 km] to the west)
- Normansville
(7 miles [11.3 km] to the east)
- Fullers
(7 miles [11.3 km] to the north)
- South Berne
(8 miles [12.9 km] to the southwest)
- Dormansville
(8 miles [12.9 km] to the south)
- South Bethlehem
(8 miles [12.9 km] to the southeast)
- Beckers Corners
(8 miles [12.9 km] to the southeast)
- Bethlehem Center
(8 miles [12.9 km] to the east)
- Roessleville
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Roessleville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roessleville
- Roessleville is located in Albany County
- Jump to TripAdvisor's Tourism page for Roessleville <3>
- Colonie
(8 miles [12.9 km] to the northeast)
- Westerlo
(9 miles [14.5 km] to the southwest)
- Selkirk
(9 miles [14.5 km] to the southeast)
- Glenmont
(9 miles [14.5 km] to the east)
- Albany
(9 miles [14.5 km] to the east)
- West Albany
(9 miles [14.5 km] to the northeast)
- Lisha Kill
(9 miles [14.5 km] to the northeast)
- Knox
(9 miles [14.5 km] to the west)
- Berne
(9 miles [14.5 km] to the west)
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Mt. Pleasant Cemetery. The point we use is located at these GPS coordinates - Latitude: 42.6245, Longitude: -73.9496 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|