Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Morningside Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Morningside Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Morningside Cemetery (FG ID #2217337). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Morningside Cemetery. We've listed the following communities based on their distance, with the closest first.
- Hartford
(Less than 2 miles to the southwest)- Jump to our Gazetteer entry for Hartford
- Hartford is located in Washington County
- Google driving directions:
- From your current location to Hartford
- From the Morningside Cemetery to Hartford
- South Hartford
(Less than 2 miles to the southwest)- Note: We haven't been able to verify our GPS coordinates for South Hartford. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for South Hartford
- South Hartford is located in Washington County
- Google driving directions:
- From your current location to South Hartford
- From the Morningside Cemetery to South Hartford
- East Hartford
(2 miles [3.2 km] to the south)- Note: We haven't been able to verify our GPS coordinates for East Hartford. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for East Hartford
- East Hartford is located in Washington County
- Google driving directions:
- From your current location to East Hartford
- From the Morningside Cemetery to East Hartford
- North Hebron
(4 miles [6.4 km] to the southeast)- Jump to our Gazetteer entry for North Hebron
- North Hebron is located in Washington County
- Google driving directions:
- From your current location to North Hebron
- From the Morningside Cemetery to North Hebron
- Adamsville
(5 miles [8 km] to the southwest)- Jump to our Gazetteer entry for Adamsville
- Adamsville is located in Washington County
- Google driving directions:
- From your current location to Adamsville
- From the Morningside Cemetery to Adamsville
- North Granville
(5 miles [8 km] to the north)- Jump to our Gazetteer entry for North Granville
- North Granville is located in Washington County
- Google driving directions:
- From your current location to North Granville
- From the Morningside Cemetery to North Granville
- Fort Ann
(5 miles [8 km] to the northwest)- Jump to our Gazetteer entry for Fort Ann
- Fort Ann is located in Washington County
- Population from the 2020 Census: 463 people
- Jump to TripAdvisor's Tourism page for Fort Ann <4>
- Google driving directions:
- From your current location to Fort Ann
- From the Morningside Cemetery to Fort Ann
- Belcher
(6 miles [9.7 km] to the south)- Jump to our Gazetteer entry for Belcher
- Belcher is located in Washington County
- Google driving directions:
- From your current location to Belcher
- From the Morningside Cemetery to Belcher
- Comstock
(6 miles [9.7 km] to the north)- Jump to our Gazetteer entry for Comstock
- Comstock is located in Washington County
- Jump to TripAdvisor's Tourism page for Comstock <4>
- Google driving directions:
- From your current location to Comstock
- From the Morningside Cemetery to Comstock
- Granville
(6 miles [9.7 km] to the northeast)- Note: The GPS coordinates that we are using for Granville have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Granville
- Granville is located in Washington County
- Population from the 2020 Census: 2,416 people
- Jump to TripAdvisor's Tourism page for Granville <4>
- Middle Granville
(6 miles [9.7 km] to the northeast)- Note: We haven't been able to verify our GPS coordinates for Middle Granville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Middle Granville
- Middle Granville is located in Washington County
- Jump to TripAdvisor's Tourism page for Middle Granville <4>
- Google driving directions:
- From your current location to Middle Granville
- From the Morningside Cemetery to Middle Granville
- Truthville
(6 miles [9.7 km] to the northeast)- Jump to our Gazetteer entry for Truthville
- Truthville is located in Washington County
- Google driving directions:
- From your current location to Truthville
- From the Morningside Cemetery to Truthville
- Porter
(7 miles [11.3 km] to the southeast)- Jump to our Gazetteer entry for Porter
- Porter is located in Washington County
- Google driving directions:
- From your current location to Porter
- From the Morningside Cemetery to Porter
- Kingsbury
(7 miles [11.3 km] to the west)- Jump to our Gazetteer entry for Kingsbury
- Kingsbury is located in Washington County
- Google driving directions:
- From your current location to Kingsbury
- From the Morningside Cemetery to Kingsbury
- Wells
(9 miles [14.5 km] to the east)- Jump to our Gazetteer entry for Wells
- Wells is located in Rutland County (VT)
- Jump to TripAdvisor's Tourism page for Wells <4>
- Google driving directions:
- From your current location to Wells
- From the Morningside Cemetery to Wells
- Hudson Falls
(10 miles [16.1 km] to the southwest)- Jump to our Gazetteer entry for Hudson Falls
- Hudson Falls is located in Washington County
- Population from the 2020 Census: 6,988 people
- Jump to TripAdvisor's Tourism page for Hudson Falls <4>
- Google driving directions:
- From your current location to Hudson Falls
- From the Morningside Cemetery to Hudson Falls
- Argyle
(10 miles [16.1 km] to the southwest)- Note: The GPS coordinates that we are using for Argyle have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Argyle
- Argyle is located in Washington County
- Population from the 2020 Census: 291 people
- Jump to TripAdvisor's Tourism page for Argyle <4>
- Pawlet
(10 miles [16.1 km] to the east) - Wells
(10 miles [16.1 km] to the northeast) - Fort Edward
(11 miles [17.7 km] to the southwest)- Note: The GPS coordinates that we are using for Fort Edward have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fort Edward
- Fort Edward is located in Washington County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Fort Edward <4>
- West Rupert
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for West Rupert
- West Rupert is located in Bennington County (VT)
- Google driving directions:
- From your current location to West Rupert
- From the Morningside Cemetery to West Rupert
- Rupert
(11 miles [17.7 km] to the southeast)- Jump to our Gazetteer entry for Rupert
- Rupert is located in Bennington County (VT)
- Jump to TripAdvisor's Tourism page for Rupert <4>
- Google driving directions:
- From your current location to Rupert
- From the Morningside Cemetery to Rupert
- Rupert
(11 miles [17.7 km] to the southeast) - Queensbury
(11 miles [17.7 km] to the west)- Note: The GPS coordinates that we are using for Queensbury have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Queensbury
- Queensbury is located in Warren County
- Jump to TripAdvisor's Tourism page for Queensbury <4>
- Cossayuna
(12 miles [19.3 km] to the south)- Jump to our Gazetteer entry for Cossayuna
- Cossayuna is located in Washington County
- Jump to TripAdvisor's Tourism page for Cossayuna <4>
- Google driving directions:
- From your current location to Cossayuna
- From the Morningside Cemetery to Cossayuna
- Poultney
(12 miles [19.3 km] to the northeast)- Jump to our Gazetteer entry for Poultney
- Poultney is located in Rutland County (VT)
- Population from the 2020 Census: 1,546 people
- Jump to TripAdvisor's Tourism page for Poultney <4>
- Google driving directions:
- From your current location to Poultney
- From the Morningside Cemetery to Poultney
- Hampton
(12 miles [19.3 km] to the northeast)- Jump to our Gazetteer entry for Hampton
- Hampton is located in Washington County
- Google driving directions:
- From your current location to Hampton
- From the Morningside Cemetery to Hampton
- Whitehall
(12 miles [19.3 km] to the north)- Note: The GPS coordinates that we are using for Whitehall have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Whitehall
- Whitehall is located in Washington County
- Population from the 2020 Census: 2,517 people
- Jump to TripAdvisor's Tourism page for Whitehall <4>
Off-the-Road Links ...
The official website for Washington County: www.co.washington.ny.us
The official website for State of New York: https://www.ny.gov/
Footnotes ...
| <1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
| <2> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Morningside Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.3693, Longitude: -73.3892 |
| <3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |