Welcome to Ione ...
So far, we found very little information about Ione. The little that we've found leads us believe that the community is historic.<1>
We've added Ione to our Gazetteer with the hope that we can develop more information. If you can help us with Ione, please Contact Us.
Ione would have been located within present day Nye County<2>.
While the community is gone, the present day location for Ione is 6,750 feet [2,057 m] above sea level.<3> In other words, the altitude of Ione is about 1¼ mile [or ~2 km] above sea level.
Time Zone: The area where Ione was located is in the Pacific Time Zone (PST/PDT) and observes daylight saving time
Communities Also Named Ione ...
Using our Gazetteer, we found that there are 6 communities that are also named Ione - they are located in Arkansas, California, Colorado, Georgia, Oregon and Washington.
For more information, see our Tidbits & Trivia Page for Ione.
Communities near Ione ...
We have created a list of 10 communities that are near Ione.
- Gabbs
(19 miles [30.6 km] to the west)- Jump to our Gazetteer entry for Gabbs
- Gabbs is located in Nye County
- Jump to TripAdvisor's Tourism page for Gabbs <4>
- Berlin ‑ Historic
(4 miles [6.4 km] to the south)- Jump to our Gazetteer entry for Berlin
- Berlin is located in Nye County
- Grantsville ‑ Historic
(7 miles [11.3 km] to the south)- Jump to our Gazetteer entry for Grantsville
- Grantsville is located in Nye County
- Green Springs ‑ Historic
(13 miles [20.9 km] to the west)- Jump to our Gazetteer entry for Green Springs
- Green Springs is located in Nye County
- Lodi ‑ Historic
(16 miles [25.7 km] to the west) - Ophir ‑ Historic
(16 miles [25.7 km] to the east) - Goldyke ‑ Historic
(21 miles [33.8 km] to the southwest)- Jump to our Gazetteer entry for Goldyke
- Goldyke is located in Nye County
- Broken Hills ‑ Historic
(23 miles [37 km] to the west)- Jump to our Gazetteer entry for Broken Hills
- Broken Hills is located in Mineral County
- Carvers
(25 miles [40.2 km] to the southeast)- Jump to our Gazetteer entry for Carvers
- Carvers is located in Nye County
- Jett ‑ Historic
(25 miles [40.2 km] to the southeast)
To Help With Your Genealogy Research ...
We have a couple of sections for those tracing their genealogy.
We're compiling a list of cemeteries that are in the area around Ione. Our list includes the location of those cemeteries and we provide an overhead view. See our Cemetery List for Ione.
Using the information from an 1895 Atlas, we've created a list of communities that were in the area of Ione. Our list includes information such as whether the 1895 community had a post office or railroad service. See our List of 1890's Communities around Ione.
We also have a detailed list of newspapers that have been published in the area around Ione. See our Newspapers Page for Ione.
Off-the-Road Links ...
The official website for Nye County: www.co.nye.nv.us/
The official website for State of Nevada: nv.gov/
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Ione, please let us know so that we can improve our accuracy. |
| <2> | If you're interested in how the shape of Nevada's counties, including Nye, have changed over time, we recommend the Atlas of Historical County Boundaries. |
| <3> | The elevation is an estimate for the area around Ione - it will be higher in some places and lower in others. |
| <4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |