Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Mountain City Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Mountain City Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the Mountain City Cemetery (FG ID #2158345). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the Mountain City Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Mountain City
(Less than 2 miles to the southeast)
- Rio Tinto ‑ Historic
(2 miles [3.2 km] to the south)
- Note: We haven't been able to verify our GPS coordinates for Rio Tinto. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Rio Tinto
- Rio Tinto is located in Elko County
- Owyhee
(9 miles [14.5 km] to the northwest)
- Deep Creek ‑ Historic
(21 miles [33.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Deep Creek have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Deep Creek
- Deep Creek is located in Elko County
- Bruno City ‑ Historic
(21 miles [33.8 km] to the east)
- Note: The GPS coordinates that we are using for Bruno City have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bruno City
- Bruno City is located in Elko County
- Riddle
(24 miles [38.6 km] to the north)
- Note: The GPS coordinates that we are using for Riddle have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riddle
- Riddle is located in Owyhee County (ID)
- Cornucopia ‑ Historic
(27 miles [43.5 km] to the southwest)
- Note: The GPS coordinates that we are using for Cornucopia have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cornucopia
- Cornucopia is located in Elko County
- Anderson ‑ Historic
(27 miles [43.5 km] to the south)
- Note: The GPS coordinates that we are using for Anderson have been provided by the GNIS.<5> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Anderson
- Anderson is located in Elko County
- Jarbidge
(27 miles [43.5 km] to the east)
Off-the-Road Links ...
The official website for Elko County: www.elkocountynv.net/
The official website for State of Nevada: nv.gov/
Footnotes ...
<1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
<2> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Mountain City Cemetery. The point we use is located at these GPS coordinates - Latitude: 41.8497, Longitude: -115.9736 |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |