A Gazetteer for the United States and Canada
Adits Mill, Nevada
Welcome to Adits Mill ...
So far, we have found very little information about Adits Mill. The little that we've found leads us believe that the community is historic.<1>
We've added Adits Mill to our Gazetteer with the hope that we can develop more information. If you can help us with Adits Mill, please Contact Us.
Adits Mill would have been located within present day Lander County.
The location of Adits Mill has been provided by the Geographic Names Information System (ie- the GNIS).<2>
A typical abbreviation for Adits Mill: Adits Ml. (or less commonly used: Adits Mll.)
See our Genealogy Helper Page for Adits Mill for more information about variations on the name of Adits Mill.
While the community is gone, the present day location for Adits Mill is 7,700 feet [2,347 m] above sea level.<3> In other words, the altitude of Adits Mill is about 1½ mile [or ~2¼ km] above sea level.
Time Zone: The area where Adits Mill was located is in the Pacific Time Zone (PST/PDT) and observes daylight saving time
If Adits Mill still existed, it would have been in the (775) area code.
Communities near Adits Mill ...
A sample of nearby communities can be found below.
Please note that when we give a distance, it's a 'straight-line' distance and not the distance if you are driving.<4>.
To learn more about neighboring communities and counties, please visit the Nearby Page for Adits Mill.
See Our Genealogy Helper Page ...
We have a couple of sections for those tracing their genealogy.
These sections can be found on our Genealogy Helper Page for Adits Mill:
Other Roadside Stops ...
Off-the-Road Links ...
The official website for State of Nevada: nv.gov/
Please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.
If you've found an error or have additional information that you would like to share, please don't hesitate to write. Click here to contact us.
This page was last modified: 07 Mar 2019