Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Whitefield had a population of 700 people in 1895 with a post office and railroad service. In 2020, Whitefield had a population of 2,197 people.
The following communities are listed based on their distance from Whitefield, with the one closest to Whitefield listed first.
- Hazens
(2 miles [3.2 km] to the east)
- Note: The GPS coordinates that we are using for Hazens have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hazens
- Hazens is located in Coos County
- Scott
(3 miles [4.8 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Scott. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Scott
- Scott is located in Coos County
- Google driving directions:
- From your current location to Scott
- From Whitefield to Scott
- Quebec Junction
(3 miles [4.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Quebec Junction have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Quebec Junction
- Quebec Junction is located in Coos County
- Alderbrook
(5 miles [8 km] to the southwest)
- Note: The GPS coordinates that we are using for Alderbrook have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Alderbrook
- Alderbrook is located in Grafton County
- South Lunenburg
(5 miles [8 km] to the northwest)
- Note: The GPS coordinates that we are using for South Lunenburg have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Lunenburg
- South Lunenburg is located in Essex County (VT)
- Dalton
(5 miles [8 km] to the northwest)
- South Lancaster
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for South Lancaster have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Lancaster
- South Lancaster is located in Coos County
- Maplewood
(6 miles [9.7 km] to the south)
- Riverton
(6 miles [9.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Riverton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Riverton
- Riverton is located in Coos County
- Apthorp
(7 miles [11.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Apthorp have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Apthorp
- Apthorp is located in Grafton County
- Bethlehem
(7 miles [11.3 km] to the southwest)
- Pierce Bridge
(7 miles [11.3 km] to the south)
- Twin Mountain
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for Twin Mountain have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Twin Mountain
- Twin Mountain is located in Coos County
- Jump to TripAdvisor's Tourism page for Twin Mountain <4>
- Jefferson
(7 miles [11.3 km] to the northeast)
- Lunenburg
(7 miles [11.3 km] to the northwest)
- East Concord
(7 miles [11.3 km] to the northwest)
- Grange
(8 miles [12.9 km] to the northeast)
- Note: The GPS coordinates that we are using for Grange have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Grange
- Grange is located in Coos County
- Lancaster
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Lancaster have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lancaster
- Lancaster is located in Coos County
- Population from the 2020 Census: 3,234 people
- Jump to TripAdvisor's Tourism page for Lancaster <4>
- Littleton
(9 miles [14.5 km] to the southwest)
- Jefferson Highland
(9 miles [14.5 km] to the east)
- North Littleton
(9 miles [14.5 km] to the west)
- Fabyan
(10 miles [16.1 km] to the southeast)
- Miles Pond
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Miles Pond have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Miles Pond
- Miles Pond is located in Essex County (VT)
- Franconia
(12 miles [19.3 km] to the southwest)
- Northumberland
(13 miles [20.9 km] to the north)
- Guildhall
(13 miles [20.9 km] to the north)
- North Concord
(13 miles [20.9 km] to the northwest)
- Note: The GPS coordinates that we are using for North Concord have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Concord
- North Concord is located in Essex County (VT)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Whitefield. If you can help, please contact us through our Feedback Page.
The official website for State of New Hampshire: https://www.nh.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Whitefield, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |