|
Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Gilmanton Iron Works, Gilmanton Iw had a population of 450 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Gilmanton Iron Works, Gilmanton Iw, with the one closest to Gilmanton Iron Works, Gilmanton Iw listed first.
- Lower Gilmanton
(3 miles [4.8 km] to the southwest)
- Alton
(4 miles [6.4 km] to the northeast)
- Alton Bay
(4 miles [6.4 km] to the northeast)
- Barnstead
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Barnstead have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barnstead
- Barnstead is located in Belknap County
- Population from the 2020 Census: 4,777 people
- Jump to TripAdvisor's Tourism page for Barnstead <3>
- Center Barnstead
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Center Barnstead have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Center Barnstead
- Center Barnstead is located in Belknap County
- Jump to TripAdvisor's Tourism page for Center Barnstead <3>
- Gilmanton
(5 miles [8 km] to the west)
- New Durham
(6 miles [9.7 km] to the east)
- Loudon Center
(7 miles [11.3 km] to the southwest)
- Pittsfield
(7 miles [11.3 km] to the south)
- South Barnstead
(7 miles [11.3 km] to the southeast)
- Note: The GPS coordinates that we are using for South Barnstead have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Barnstead
- South Barnstead is located in Belknap County
- Davis
(7 miles [11.3 km] to the east)
- Mount Major
(7 miles [11.3 km] to the north)
- Note: The GPS coordinates that we are using for Mount Major have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Major
- Mount Major is located in Belknap County
- Strafford
(8 miles [12.9 km] to the southeast)
- Websters Mill
(9 miles [14.5 km] to the south)
- West Alton
(9 miles [14.5 km] to the north)
- Spring Haven
(9 miles [14.5 km] to the north)
- Belmont
(9 miles [14.5 km] to the west)
- Gilford
(10 miles [16.1 km] to the northwest)
- Note: The GPS coordinates that we are using for Gilford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gilford
- Gilford is located in Belknap County
- Population from the 2020 Census: 7,278 people
- Jump to TripAdvisor's Tourism page for Gilford <3>
- Lake Shore Park
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Lake Shore Park have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lake Shore Park
- Lake Shore Park is located in Belknap County
- North Chichester
(11 miles [17.7 km] to the south)
- Note: The GPS coordinates that we are using for North Chichester have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for North Chichester
- North Chichester is located in Merrimack County
- Farmington
(11 miles [17.7 km] to the east)
- South Wolfeboro
(11 miles [17.7 km] to the northeast)
- Laconia
(11 miles [17.7 km] to the northwest)
- Loudon
(12 miles [19.3 km] to the southwest)
- Note: The GPS coordinates that we are using for Loudon have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Loudon
- Loudon is located in Merrimack County
- Population from the 2020 Census: 5,697 people
- Jump to TripAdvisor's Tourism page for Loudon <3>
- Chichester
(12 miles [19.3 km] to the southwest)
- Middleton
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Middleton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middleton
- Middleton is located in Strafford County
- Population from the 2020 Census: 1,832 people
- Wolfeboro
(12 miles [19.3 km] to the north)
- East Tilton
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for East Tilton have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for East Tilton
- East Tilton is located in Belknap County
- Gardners Grove
(12 miles [19.3 km] to the west)
Footnotes ...
| <1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Gilmanton Iron Works, Gilmanton Iw, please let us know so that we can improve our accuracy. |
| <2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|