RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of New Hampshire >> Strafford County >> Davis >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
New Hampshire


The Commemorative Quarter for New Hampshire







Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

The Rand McNally Atlas shows that in 1895, Davis had railroad service and no post office.

The following communities are listed based on their distance from Davis, with the one closest to Davis listed first.

  • New Durham
    (Less than 2 miles to the northwest)
  • Farmington
    (4 miles [6.4 km] to the east)
  • Alton
    (4 miles [6.4 km] to the northwest)
    • Jump to our Gazetteer entry for Alton
    • Alton is located in Belknap County
    • Population from the 2020 Census: 5,364 people
    • Jump to TripAdvisor's Tourism page for Alton <2>
  • Middleton
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Middleton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Middleton
    • Middleton is located in Strafford County
    • Population from the 2020 Census: 1,832 people
  • Strafford
    (6 miles [9.7 km] to the south)
  • Place
    (6 miles [9.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Place have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Place
    • Place is located in Strafford County
  • Alton Bay
    (6 miles [9.7 km] to the northwest)
  • Center Barnstead
    (7 miles [11.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Center Barnstead have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Center Barnstead
    • Center Barnstead is located in Belknap County
    • Jump to TripAdvisor's Tourism page for Center Barnstead <2>
  • Milton
    (7 miles [11.3 km] to the east)
    • Jump to our Gazetteer entry for Milton
    • Milton is located in Strafford County
    • Population from the 2020 Census: 4,614 people
    • Jump to TripAdvisor's Tourism page for Milton <2>
  • Union
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Union have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Union
    • Union is located in Carroll County
  • Gilmanton Ironworks
    (7 miles [11.3 km] to the west)
    • Note: The GPS coordinates that we are using for Gilmanton Ironworks have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gilmanton Ironworks
    • Gilmanton Ironworks is located in Belknap County
  • South Barnstead
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for South Barnstead have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for South Barnstead
    • South Barnstead is located in Belknap County
  • Strafford Corner
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Strafford Corner have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Strafford Corner
    • Strafford Corner is located in Strafford County
  • North Rochester
    (8 miles [12.9 km] to the east)
    • Jump to our Gazetteer entry for North Rochester
    • North Rochester is located in Strafford County
  • Barnstead
    (9 miles [14.5 km] to the southwest)
    • Note: The GPS coordinates that we are using for Barnstead have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Barnstead
    • Barnstead is located in Belknap County
    • Population from the 2020 Census: 4,777 people
    • Jump to TripAdvisor's Tourism page for Barnstead <2>
  • Center Strafford
    (9 miles [14.5 km] to the south)
    • Note: The GPS coordinates that we are using for Center Strafford have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Center Strafford
    • Center Strafford is located in Strafford County
  • West Lebanon
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for West Lebanon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for West Lebanon
    • West Lebanon is located in York County (ME)
    • Jump to TripAdvisor's Tourism page for West Lebanon <2>
  • Mount Major
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Mount Major have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mount Major
    • Mount Major is located in Belknap County
  • Lower Gilmanton
    (10 miles [16.1 km] to the west)
    • Note: The GPS coordinates that we are using for Lower Gilmanton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lower Gilmanton
    • Lower Gilmanton is located in Belknap County
  • Milton Mills
    (10 miles [16.1 km] to the northeast)
    • Note: The GPS coordinates that we are using for Milton Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Milton Mills
    • Milton Mills is located in Strafford County
  • Brookfield
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Brookfield have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Brookfield
    • Brookfield is located in Carroll County
    • Population from the 2020 Census: 688 people
  • South Wolfeboro
    (10 miles [16.1 km] to the north)
    • Jump to our Gazetteer entry for South Wolfeboro
    • South Wolfeboro is located in Carroll County
  • Pittsfield
    (11 miles [17.7 km] to the southwest)
  • Rochester
    (11 miles [17.7 km] to the southeast)
  • East Rochester
    (11 miles [17.7 km] to the southeast)
    • Jump to our Gazetteer entry for East Rochester
    • East Rochester is located in Strafford County
  • Center Lebanon
    (11 miles [17.7 km] to the east)
    • Note: The GPS coordinates that we are using for Center Lebanon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Center Lebanon
    • Center Lebanon is located in York County (ME)

The official website for Strafford County: www.co.strafford.nh.us/

The official website for State of New Hampshire: https://www.nh.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Davis, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024