|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Pleasant View Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Pleasant View Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Pleasant View Cemetery. We've listed the following communities based on their distance, with the closest first.
- West Rumney
(Less than 2 miles to the southeast)
- Cheever
(2 miles [3.2 km] to the southwest)
- Rumney
(3 miles [4.8 km] to the east)
- North Dorchester
(4 miles [6.4 km] to the west)
- North Groton
(4 miles [6.4 km] to the south)
- Dorchester
(5 miles [8 km] to the southwest)
- Quincy
(5 miles [8 km] to the east)
- Groton
(8 miles [12.9 km] to the south)
- Ellsworth
(8 miles [12.9 km] to the northeast)
- Plymouth
(10 miles [16.1 km] to the east)
- Campton Lower Village
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Campton Lower Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campton Lower Village
- Campton Lower Village is located in Grafton County
- Campton Upper Village
(12 miles [19.3 km] to the east)
- Note: The GPS coordinates that we are using for Campton Upper Village have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Campton Upper Village
- Campton Upper Village is located in Grafton County
- Thornton
(12 miles [19.3 km] to the east)
- Lyme Center
(12 miles [19.3 km] to the west)
- Canaan Street
(13 miles [20.9 km] to the southwest)
- Canaan
(13 miles [20.9 km] to the southwest)
- Lyme
(13 miles [20.9 km] to the west)
- Fairlee
(14 miles [22.5 km] to the northwest)
- Alexandria
(15 miles [24.1 km] to the south)
- Ashland
(15 miles [24.1 km] to the southeast)
- Holderness
(15 miles [24.1 km] to the east)
- Ely
(15 miles [24.1 km] to the west)
- Fairlee
(16 miles [25.7 km] to the northwest)
- Note: The GPS coordinates that we are using for Fairlee have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairlee
- Fairlee is located in Orange County (VT)
- Population from the 2020 Census: 976 people
- Pompanoosuc
(17 miles [27.4 km] to the west)
- Enfield
(17 miles [27.4 km] to the southwest)
- Lockehaven
(17 miles [27.4 km] to the southwest)
- East Grafton
(17 miles [27.4 km] to the south)
- Bristol
(17 miles [27.4 km] to the southeast)
- Haverhill
(17 miles [27.4 km] to the northwest)
- North Woodstock
(17 miles [27.4 km] to the northeast)
- Bradford
(17 miles [27.4 km] to the northwest)
Off-the-Road Links ...
The official website for State of New Hampshire: https://www.nh.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Pleasant View Cemetery. The point we use is located at these GPS coordinates - Latitude: 43.8194, Longitude: -71.8815 |
<2> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
|
|