RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of Nebraska >> Hall County >> Parkview >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
Nebraska

The Commemorative Quarter for Nebraska





Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Parkview (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Parkview. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Parkview is located in Hall County.

To see how the shape of Nebraska's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Hall County: Adams, Buffalo, Hamilton, Howard & Merrick.

Below are the counties that are near Parkview. For each of these counties, we show a sample of those communities that are closest to Parkview:

  • Hall County     (The home county of Parkview)
    • The following are listed by their distance from Parkview, with the one closest to Parkview listed first.
    • Grand Island
      (Less than 2 miles to the north)
    • Alda
      (6 miles [9.7 km] to the west)
      • Note: The GPS coordinates that we are using for Alda have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alda
      • Alda is located in Hall County
      • Population from the 2020 Census: 660 people
      • Jump to TripAdvisor's Tourism page for Alda <1>
    • Doniphan
      (8 miles [12.9 km] to the south)
      • Note: The GPS coordinates that we are using for Doniphan have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Doniphan
      • Doniphan is located in Hall County
      • Population from the 2020 Census: 832 people
      • Jump to TripAdvisor's Tourism page for Doniphan <1>
    • Wood River
      (14 miles [22.5 km] to the southwest)
    • Cairo
      (15 miles [24.1 km] to the northwest)
    • Cameron
      (15 miles [24.1 km] to the west)
      • Jump to our Gazetteer entry for Cameron
      • Cameron is located in Hall County
  • Adams County
    • The following are listed by their distance from Parkview, with the one closest to Parkview listed first.
    • Hansen
      (14 miles [22.5 km] to the south)
      • Jump to our Gazetteer entry for Hansen
      • Hansen is located in Adams County
    • Prosser
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Prosser have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prosser
      • Prosser is located in Adams County
      • Population from the 2020 Census: 71 people
    • Blaine
      (20 miles [32.2 km] to the south)
      • Jump to our Gazetteer entry for Blaine
      • Blaine is located in Adams County
    • Hayland
      (20 miles [32.2 km] to the southwest)
      • Jump to our Gazetteer entry for Hayland
      • Hayland is located in Adams County
    • Hastings
      (21 miles [33.8 km] to the south)
    • Good Samaritan Village
      (22 miles [35.4 km] to the south)
      • Note: The GPS coordinates that we are using for Good Samaritan Village have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Good Samaritan Village
      • Good Samaritan Village is located in Adams County
    • Juniata
      (23 miles [37 km] to the south)
    • Kenesaw
      (25 miles [40.2 km] to the southwest)
      • Note: The GPS coordinates that we are using for Kenesaw have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kenesaw
      • Kenesaw is located in Adams County
      • Population from the 2020 Census: 950 people
      • Jump to TripAdvisor's Tourism page for Kenesaw <1>
    • Assumption
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Assumption
      • Assumption is located in Adams County
  • Buffalo County
    • The following are listed by their distance from Parkview, with the one closest to Parkview listed first.
    • Shelton
      (21 miles [33.8 km] to the southwest)
      • Note: The GPS coordinates that we are using for Shelton have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shelton
      • Shelton is located in Buffalo County
      • Population from the 2020 Census: 1,055 people
      • Jump to TripAdvisor's Tourism page for Shelton <1>
    • Denman
      (24 miles [38.6 km] to the southwest)
      • Jump to our Gazetteer entry for Denman
      • Denman is located in Buffalo County
    • Gibbon
      (28 miles [45.1 km] to the southwest)
      • Note: The GPS coordinates that we are using for Gibbon have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gibbon
      • Gibbon is located in Buffalo County
      • Population from the 2020 Census: 1,875 people
      • Jump to TripAdvisor's Tourism page for Gibbon <1>
    • Ravenna
      (30 miles [48.3 km] to the west)
  • Clay County
    • The following are listed by their distance from Parkview, with the one closest to Parkview listed first.
    • Trumbull
      (15 miles [24.1 km] to the south)
    • Inland
      (22 miles [35.4 km] to the south)
    • Harvard
      (23 miles [37 km] to the southeast)
    • Glenvil
      (28 miles [45.1 km] to the south)
    • Saronville
      (29 miles [46.7 km] to the southeast)
      • Note: The GPS coordinates that we are using for Saronville have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saronville
      • Saronville is located in Clay County
      • Population from the 2020 Census: 45 people
      • Jump to TripAdvisor's Tourism page for Saronville <1>
    • Clay Center
      (30 miles [48.3 km] to the southeast)
  • Hamilton County
    • The following are listed by their distance from Parkview, with the one closest to Parkview listed first.
    • Phillips
      (6 miles [9.7 km] to the east)
    • Giltner
      (13 miles [20.9 km] to the southeast)
      • Note: The GPS coordinates that we are using for Giltner have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Giltner
      • Giltner is located in Hamilton County
      • Population from the 2020 Census: 363 people
      • Jump to TripAdvisor's Tourism page for Giltner <1>
    • Aurora
      (18 miles [29 km] to the east)
      • Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aurora
      • Aurora is located in Hamilton County
      • Population from the 2020 Census: 4,490 people
      • Jump to TripAdvisor's Tourism page for Aurora <1>
    • Marquette
      (19 miles [30.6 km] to the northeast)
    • Kronborg
      (22 miles [35.4 km] to the east)
      • Jump to our Gazetteer entry for Kronborg
      • Kronborg is located in Hamilton County
    • Overland
      (22 miles [35.4 km] to the northeast)
      • Jump to our Gazetteer entry for Overland
      • Overland is located in Hamilton County
    • Hampton
      (24 miles [38.6 km] to the east)
    • Stockham
      (24 miles [38.6 km] to the southeast)
      • Note: The GPS coordinates that we are using for Stockham have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Stockham
      • Stockham is located in Hamilton County
      • Population from the 2020 Census: 44 people
    • Hordville
      (26 miles [41.8 km] to the northeast)
  • Howard County
    • The following are listed by their distance from Parkview, with the one closest to Parkview listed first.
    • Saint Libory
      (12 miles [19.3 km] to the north)
    • Dannebrog
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dannebrog have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dannebrog
      • Dannebrog is located in Howard County
      • Population from the 2020 Census: 307 people
      • Jump to TripAdvisor's Tourism page for Dannebrog <1>
    • Nysted
      (21 miles [33.8 km] to the northwest)
      • Jump to our Gazetteer entry for Nysted
      • Nysted is located in Howard County
    • Saint Paul
      (22 miles [35.4 km] to the north)
    • Boelus
      (22 miles [35.4 km] to the northwest)
    • Howard City
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Howard City have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Howard City
      • Howard City is located in Howard County
      • Population from the 2020 Census: 187 people
    • Farwell
      (26 miles [41.8 km] to the northwest)
    • Cushing
      (27 miles [43.5 km] to the north)
      • Jump to our Gazetteer entry for Cushing
      • Cushing is located in Howard County
      • Population from the 2020 Census: 33 people
    • Elba
      (28 miles [45.1 km] to the northwest)
  • Merrick County
    • The following are listed by their distance from Parkview, with the one closest to Parkview listed first.
    • Chapman
      (12 miles [19.3 km] to the northeast)
    • Worms
      (14 miles [22.5 km] to the north)
      • Jump to our Gazetteer entry for Worms
      • Worms is located in Merrick County
    • Archer
      (21 miles [33.8 km] to the northeast)
    • Palmer
      (22 miles [35.4 km] to the north)
    • Hord
      (22 miles [35.4 km] to the northeast)
      • Note: We haven't been able to verify our GPS coordinates for Hord. Although the coordinates have been estimated, they should be in the vicinity.<3>
      • Jump to our Gazetteer entry for Hord
      • Hord is located in Merrick County
    • Central City
      (23 miles [37 km] to the northeast)
  • Sherman County
    • Rockville
      (29 miles [46.7 km] to the northwest)
  • York County
    • Henderson
      (29 miles [46.7 km] to the east)

For an expanded list of the communities that are closest to Parkview, see our County-by-County Page for Parkview.

Cemeteries Near Parkview ...

Below are cemeteries that are in the vicinity of Parkview.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Parkview covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Parkview, with the one closest to Parkview listed first.

  • Grand Island Cemetery
    (Less than 2 miles to the west)
  • West Lawn Park Cemetery
    (2 miles [3.2 km] to the west)
  • Soldiers & Sailors Cemetery
    (3 miles [4.8 km] to the northwest)
    • Jump to our Gazetteer entry for the Soldiers & Sailors Cemetery
    • To give a relative sense of its location, the Soldiers & Sailors Cemetery is located in Grand Island.
    • The Soldiers & Sailors Cemetery has also been known as:
    • Burkett Cemetery
    • Nebraska Veterans Home Cemetery
    • Jump to Find-A-Grave: FG ID #101463 <4>
  • East Grand Island Cemetery
    (3 miles [4.8 km] to the northeast)
  • Phillips Cemetery
    (6 miles [9.7 km] to the east)
  • Alda Cemetery
    (7 miles [11.3 km] to the southwest)
  • Cedar View Cemetery
    (8 miles [12.9 km] to the south)
  • Campbell Cemetery
    (9 miles [14.5 km] to the south)
  • Weigert Cemetery
    (9 miles [14.5 km] to the north)
    • Jump to our Gazetteer entry for the Weigert Cemetery
    • Note: The GPS coordinates that we are using for the Weigert Cemetery have been provided by the GNIS.<2> The coordinates still need to be verified.
  • Wiegert Cemetery
    (9 miles [14.5 km] to the north)
  • Laurel Cemetery
    (10 miles [16.1 km] to the northeast)
    • Jump to our Gazetteer entry for the Laurel Cemetery
    • Note: We haven't been able to verify our GPS coordinates for the Laurel Cemetery. Although the coordinates have been estimated, they should be in the vicinity.<3>
    • Jump to Find-A-Grave: FG ID #2396409 <4>
  • Berwick Cemetery
    (11 miles [17.7 km] to the west)
    • Jump to our Gazetteer entry for the Berwick Cemetery
    • To give a relative sense of its location, the Berwick Cemetery is located 3 miles [4.8 km]<5> to the northwest of Cairo.
    • Jump to Find-A-Grave: FG ID #100441 <4>
  • Continue List   (127 more) ...

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Parkview in the Atlas, the following 1895 communities would have been found near the current location of Parkview.

These communities are listed based on their distance from Parkview, with the one closest to Parkview listed first.

  • Grand Island
    (Less than 2 miles to the north)
  • Alda
    (6 miles [9.7 km] to the west)
    • Note: The GPS coordinates that we are using for Alda have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Alda
    • Alda is located in Hall County
    • Population from the 2020 Census: 660 people
    • Jump to TripAdvisor's Tourism page for Alda <1>
  • Lockwood
    (7 miles [11.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Lockwood have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lockwood
    • Lockwood is located in Merrick County
  • Doniphan
    (8 miles [12.9 km] to the south)
    • Note: The GPS coordinates that we are using for Doniphan have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Doniphan
    • Doniphan is located in Hall County
    • Population from the 2020 Census: 832 people
    • Jump to TripAdvisor's Tourism page for Doniphan <1>
  • Abbott
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Abbott have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Abbott
    • Abbott is located in Hall County
  • Saint Libory
    (12 miles [19.3 km] to the north)
  • Chapman
    (12 miles [19.3 km] to the northeast)
  • Wood River
    (14 miles [22.5 km] to the southwest)
  • Hansen
    (14 miles [22.5 km] to the south)
    • Jump to our Gazetteer entry for Hansen
    • Hansen is located in Adams County
  • Trumbull
    (15 miles [24.1 km] to the south)
  • Cairo
    (15 miles [24.1 km] to the northwest)
  • Cameron
    (15 miles [24.1 km] to the west)
    • Jump to our Gazetteer entry for Cameron
    • Cameron is located in Hall County
  • Continue List   (14 more) ...
    • Aurora
      (18 miles [29 km] to the east)
      • Note: The GPS coordinates that we are using for Aurora have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Aurora
      • Aurora is located in Hamilton County
      • Population from the 2020 Census: 4,490 people
      • Jump to TripAdvisor's Tourism page for Aurora <1>
    • Dannebrog
      (18 miles [29 km] to the northwest)
      • Note: The GPS coordinates that we are using for Dannebrog have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dannebrog
      • Dannebrog is located in Howard County
      • Population from the 2020 Census: 307 people
      • Jump to TripAdvisor's Tourism page for Dannebrog <1>
    • Prosser
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Prosser have been provided by the GNIS.<2> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Prosser
      • Prosser is located in Adams County
      • Population from the 2020 Census: 71 people

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Parkview. See our List of 1890's Communities around Parkview.

Newspapers Published in Parkview ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 131 newspapers that have been published in the area around Parkview.

Although we're unaware of any newspapers that were published in the immediate area of Parkview, there are papers which were published within 30 miles [48.3 km]<5>. A list of those papers, sorted by paper name, can be found on the Extended Newspaper List for Parkview.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These professional and volunteer websites offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Parkview:

Unfortunately, we don't know of a website for Parkview. If you can help, please contact us through our Feedback Page.

The official website for Hall County: www.hcgi.org/

The official website for State of Nebraska: https://www.nebraska.gov/

Footnotes ...

<1>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace.
<4>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<5>Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Parkview) to Point B.Our distance measurements begin at a specific point in Parkview. The point we use is located at these GPS coordinates - Latitude: 40.9028, Longitude: -98.3476       In this case, the coordinates for Parkview have been provided by the Geographic Names Information System (GNIS).
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Parkview, please let us know so that we can improve our accuracy.




 

Copyright 2025
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 28 Apr 2025