Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Olive Branch Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Olive Branch Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Olive Branch Cemetery. We've listed the following cemeteries based on their distance, with the closest first.
- Mills
(Less than 2 miles to the east)
- Burton
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Burton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burton
- Burton is located in Keya Paha County
- Population from the 2020 Census: 9 people
- Mariaville ‑ Historic
(13 miles [20.9 km] to the southeast)
- Note: The GPS coordinates that we are using for Mariaville have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mariaville
- Mariaville is located in Rock County
- Springview
(16 miles [25.7 km] to the southwest)
- Note: The GPS coordinates that we are using for Springview have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Springview
- Springview is located in Keya Paha County
- Population from the 2020 Census: 222 people
- Jump to TripAdvisor's Tourism page for Springview <2>
- Wewela
(16 miles [25.7 km] to the west)
- Naper
(18 miles [29 km] to the east)
- Herrick
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Herrick have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Herrick
- Herrick is located in Gregory County (SD)
- Population from the 2020 Census: 103 people
- Jump to TripAdvisor's Tourism page for Herrick <2>
- Burke
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Burke have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Burke
- Burke is located in Gregory County (SD)
- Population from the 2020 Census: 588 people
- Jump to TripAdvisor's Tourism page for Burke <2>
- Gregory
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Gregory have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gregory
- Gregory is located in Gregory County (SD)
- Population from the 2020 Census: 1,250 people
- Jump to TripAdvisor's Tourism page for Gregory <2>
- Dallas
(20 miles [32.2 km] to the north)
- Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dallas
- Dallas is located in Gregory County (SD)
- Population from the 2020 Census: 126 people
- Jump to TripAdvisor's Tourism page for Dallas <2>
- Cleveland ‑ Historic
(21 miles [33.8 km] to the southeast)
- Note: The GPS coordinates that we are using for Cleveland have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cleveland
- Cleveland is located in Holt County
- Dustin
(21 miles [33.8 km] to the east)
- Jump to our Gazetteer entry for Dustin
- Dustin is located in Holt County
- Saint Charles
(21 miles [33.8 km] to the northeast)
- Meadville
(23 miles [37 km] to the southwest)
- Jump to our Gazetteer entry for Meadville
- Meadville is located in Keya Paha County
- Bassett
(24 miles [38.6 km] to the south)
- Newport
(24 miles [38.6 km] to the south)
- Note: The GPS coordinates that we are using for Newport have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newport
- Newport is located in Rock County
- Population from the 2020 Census: 89 people
- Jump to TripAdvisor's Tourism page for Newport <2>
- Colome
(25 miles [40.2 km] to the northwest)
- Note: The GPS coordinates that we are using for Colome have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Colome
- Colome is located in Tripp County (SD)
- Population from the 2020 Census: 278 people
- Jump to TripAdvisor's Tourism page for Colome <2>
- Bonesteel
(27 miles [43.5 km] to the east)
- Millboro
(27 miles [43.5 km] to the west)
- Jump to our Gazetteer entry for Millboro
- Millboro is located in Tripp County (SD)
- Estimated population in 2014: 34 people
- Stuart
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Stuart have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Stuart
- Stuart is located in Holt County
- Population from the 2020 Census: 580 people
- Jump to TripAdvisor's Tourism page for Stuart <2>
- Fairfax
(29 miles [46.7 km] to the east)
Off-the-Road Links ...
The official website for Keya Paha County: www.co.keya-paha.ne.us/
The official website for State of Nebraska: www.nebraska.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Olive Branch Cemetery. The point we use is located at these GPS coordinates - Latitude: 42.9408, Longitude: -99.4643 In this case, the coordinates for the Olive Branch Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |