Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
While we didn't find Burton in the Atlas, the following communities of the 1890's would have been found near the current location of Burton. The following communities are listed based on their distance, with the one closest to Burton listed first.
- Mills
(7 miles [11.3 km] to the east)
- Springview
(9 miles [14.5 km] to the southwest)
- Carns ‑ Historic
(13 miles [20.9 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Carns. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Carns
- Carns is located in Keya Paha County
- Meadville
(16 miles [25.7 km] to the southwest)
- Jump to our Gazetteer entry for Meadville
- Meadville is located in Keya Paha County
- Mariaville ‑ Historic
(16 miles [25.7 km] to the southeast)
- Note: We haven't been able to verify our GPS coordinates for Mariaville. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Mariaville
- Mariaville is located in Rock County
- Winfield ‑ Historic
(17 miles [27.4 km] to the south)
- Note: The GPS coordinates that we are using for Winfield have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Winfield
- Winfield is located in Brown County
- Bassett
(22 miles [35.4 km] to the south)
- Norden
(24 miles [38.6 km] to the west)
- Jump to our Gazetteer entry for Norden
- Norden is located in Keya Paha County
- Newport
(25 miles [40.2 km] to the southeast)
- Note: The GPS coordinates that we are using for Newport have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Newport
- Newport is located in Rock County
- Population from the 2020 Census: 89 people
- Jump to TripAdvisor's Tourism page for Newport <2>
- Long Pine
(26 miles [41.8 km] to the south)
- Dustin
(27 miles [43.5 km] to the east)
- Jump to our Gazetteer entry for Dustin
- Dustin is located in Holt County
- Ainsworth
(28 miles [45.1 km] to the southwest)
Off-the-Road Links ...
Unfortunately, we don't know of an official website for Burton. If you can help, please contact us through our Feedback Page.
The official website for Keya Paha County: www.co.keya-paha.ne.us/
The official website for State of Nebraska: https://www.nebraska.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Burton, please let us know so that we can improve our accuracy. |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |