RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Dakota >> Cavalier County >> Osnabrock >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Dakota

The Commemorative Quarter for North Dakota





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Osnabrock. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Osnabrock.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Osnabrock - within 27 miles [43.5 km]<1>.

Our list sorts the communities in alphabetical order. There are 20 communities listed:

  • Adams
    (17 miles [27.4 km] to the south)
  • Alsen
    (25 miles [40.2 km] to the west)
  • Canton City
    (22 miles [35.4 km] to the east)
    • Jump to our Gazetteer entry for Canton City
    • Canton City is located in Pembina County
    • Population from the 2020 Census: 33 people
    • Canton City has also been known as:
    • Hensel
    • Jump to TripAdvisor's Tourism page for Canton City <2>
  • Cavalier
    (25 miles [40.2 km] to the east)
    • Note: The GPS coordinates that we are using for Cavalier have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cavalier
    • Cavalier is located in Pembina County
    • Population from the 2020 Census: 1,204 people
    • Jump to TripAdvisor's Tourism page for Cavalier <2>
  • Crystal
    (22 miles [35.4 km] to the east)
  • Edinburg
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Edinburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edinburg
    • Edinburg is located in Walsh County
    • Population from the 2020 Census: 181 people
    • Jump to TripAdvisor's Tourism page for Edinburg <2>
  • Edmore
    (22 miles [35.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Edmore have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edmore
    • Edmore is located in Ramsey County
    • Population from the 2020 Census: 175 people
    • Jump to TripAdvisor's Tourism page for Edmore <2>
  • Fairdale
    (13 miles [20.9 km] to the south)
    • Note: The GPS coordinates that we are using for Fairdale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairdale
    • Fairdale is located in Walsh County
    • Population from the 2020 Census: 35 people
    • Jump to TripAdvisor's Tourism page for Fairdale <2>
  • Hampden
    (24 miles [38.6 km] to the west)
    • Note: The GPS coordinates that we are using for Hampden have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hampden
    • Hampden is located in Ramsey County
    • Population from the 2020 Census: 45 people
    • Jump to TripAdvisor's Tourism page for Hampden <2>
  • Hoople
    (25 miles [40.2 km] to the east)
    • Note: The GPS coordinates that we are using for Hoople have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hoople
    • Hoople is located in Walsh County
    • Population from the 2020 Census: 221 people
    • Jump to TripAdvisor's Tourism page for Hoople <2>
  • Langdon
    (12 miles [19.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Langdon have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Langdon
    • Langdon is located in Cavalier County
    • Population from the 2020 Census: 1,724 people
    • Jump to TripAdvisor's Tourism page for Langdon <2>
  • Lankin
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Lankin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lankin
    • Lankin is located in Walsh County
    • Population from the 2020 Census: 90 people
    • Jump to TripAdvisor's Tourism page for Lankin <2>
  • Lawton
    (27 miles [43.5 km] to the south)
    • Note: The GPS coordinates that we are using for Lawton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lawton
    • Lawton is located in Ramsey County
    • Population from the 2020 Census: 31 people
    • Jump to TripAdvisor's Tourism page for Lawton <2>
  • Maida
    (24 miles [38.6 km] to the northwest)
  • Milton
    (5 miles [8 km] to the southeast)
  • Mountain
    (13 miles [20.9 km] to the east)
    • Note: The GPS coordinates that we are using for Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mountain
    • Mountain is located in Pembina County
    • Population from the 2020 Census: 81 people
    • Jump to TripAdvisor's Tourism page for Mountain <2>
  • Nekoma
    (12 miles [19.3 km] to the southwest)
    • Note: The GPS coordinates that we are using for Nekoma have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Nekoma
    • Nekoma is located in Cavalier County
    • Population from the 2020 Census: 48 people
    • Jump to TripAdvisor's Tourism page for Nekoma <2>
  • Park River
    (26 miles [41.8 km] to the southeast)
    • Note: The GPS coordinates that we are using for Park River have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Park River
    • Park River is located in Walsh County
    • Population from the 2020 Census: 1,305 people
    • Jump to TripAdvisor's Tourism page for Park River <2>
  • Wales
    (25 miles [40.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Wales have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wales
    • Wales is located in Cavalier County
    • Population from the 2020 Census: 30 people
    • Jump to TripAdvisor's Tourism page for Wales <2>
  • Walhalla
    (20 miles [32.2 km] to the northeast)

Unfortunately, we don't know of an official website for Osnabrock. If you can help, please contact us through our Feedback Page.

The official website for State of North Dakota: www.nd.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Osnabrock) to Point B.Our distance measurements begin at a specific point in Osnabrock. The point we use is located at these GPS coordinates - Latitude: 48.6703, Longitude: -98.1493       In this case, the coordinates for Osnabrock have been provided by the Geographic Names Information System (GNIS).
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024