RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Dakota >> Grand Forks County >> Inkster >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Dakota

The Commemorative Quarter for North Dakota





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Inkster. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Inkster.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Inkster - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 23 communities listed:

  • Adams
    (27 miles [43.5 km] to the northwest)
  • Ardoch
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Ardoch have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ardoch
    • Ardoch is located in Walsh County
    • Population from the 2020 Census: 80 people
    • Jump to TripAdvisor's Tourism page for Ardoch <2>
  • Arvilla
    (17 miles [27.4 km] to the southeast)
  • Crystal
    (30 miles [48.3 km] to the north)
  • Edinburg
    (25 miles [40.2 km] to the northwest)
    • Note: The GPS coordinates that we are using for Edinburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edinburg
    • Edinburg is located in Walsh County
    • Population from the 2020 Census: 181 people
    • Jump to TripAdvisor's Tourism page for Edinburg <2>
  • Emerado
    (20 miles [32.2 km] to the southeast)
    • Note: The GPS coordinates that we are using for Emerado have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Emerado
    • Emerado is located in Grand Forks County
    • Population from the 2020 Census: 461 people
    • Jump to TripAdvisor's Tourism page for Emerado <2>
  • Fordville
    (8 miles [12.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Fordville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fordville
    • Fordville is located in Walsh County
    • Population from the 2020 Census: 194 people
    • Jump to TripAdvisor's Tourism page for Fordville <2>
  • Forest River
    (9 miles [14.5 km] to the northeast)
  • Gilby
    (9 miles [14.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Gilby have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Gilby
    • Gilby is located in Grand Forks County
    • Population from the 2020 Census: 230 people
    • Jump to TripAdvisor's Tourism page for Gilby <2>
  • Grafton
    (21 miles [33.8 km] to the northeast)
  • Hoople
    (26 miles [41.8 km] to the north)
    • Note: The GPS coordinates that we are using for Hoople have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hoople
    • Hoople is located in Walsh County
    • Population from the 2020 Census: 221 people
    • Jump to TripAdvisor's Tourism page for Hoople <2>
  • Lankin
    (17 miles [27.4 km] to the northwest)
    • Note: The GPS coordinates that we are using for Lankin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lankin
    • Lankin is located in Walsh County
    • Population from the 2020 Census: 90 people
    • Jump to TripAdvisor's Tourism page for Lankin <2>
  • Larimore
    (16 miles [25.7 km] to the south)
  • Manvel
    (22 miles [35.4 km] to the east)
    • Note: The GPS coordinates that we are using for Manvel have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Manvel
    • Manvel is located in Grand Forks County
    • Population from the 2020 Census: 372 people
    • Jump to TripAdvisor's Tourism page for Manvel <2>
  • Mekinock
    (15 miles [24.1 km] to the southeast)
  • Michigan
    (23 miles [37 km] to the west)
  • Minto
    (15 miles [24.1 km] to the northeast)
  • Niagara
    (14 miles [22.5 km] to the southwest)
  • Northwood
    (28 miles [45.1 km] to the south)
    • Note: The GPS coordinates that we are using for Northwood have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Northwood
    • Northwood is located in Grand Forks County
    • Population from the 2020 Census: 884 people
    • Jump to TripAdvisor's Tourism page for Northwood <2>
  • Oslo
    (23 miles [37 km] to the east)
    • Note: The GPS coordinates that we are using for Oslo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Oslo
    • Oslo is located in Marshall County (MN)
    • Population from the 2020 Census: 323 people
    • Jump to TripAdvisor's Tourism page for Oslo <2>
  • Park River
    (17 miles [27.4 km] to the north)
    • Note: The GPS coordinates that we are using for Park River have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Park River
    • Park River is located in Walsh County
    • Population from the 2020 Census: 1,305 people
    • Jump to TripAdvisor's Tourism page for Park River <2>
  • Petersburg
    (19 miles [30.6 km] to the southwest)
    • Note: The GPS coordinates that we are using for Petersburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Petersburg
    • Petersburg is located in Nelson County
    • Population from the 2020 Census: 168 people
    • Jump to TripAdvisor's Tourism page for Petersburg <2>
  • Pisek
    (11 miles [17.7 km] to the north)

Unfortunately, we don't know of an official website for Inkster. If you can help, please contact us through our Feedback Page.

The official website for Grand Forks County: www.grandforkscountygov.com/

The official website for State of North Dakota: https://www.nd.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Inkster) to Point B.Our distance measurements begin at a specific point in Inkster. The point we use is located at these GPS coordinates - Latitude: 48.1513, Longitude: -97.6439    
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Oct 2024