|
Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the Swenson Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the Swenson Cemetery.
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<1> of the Swenson Cemetery. We've listed the following communities based on their distance, with the closest first.
- Hatton
(5 miles [8 km] to the south)
- Note: The GPS coordinates that we are using for Hatton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hatton
- Hatton is located in Traill County
- Population from the 2020 Census: 731 people
- Jump to TripAdvisor's Tourism page for Hatton <3>
- Northwood
(5 miles [8 km] to the west)
- Note: The GPS coordinates that we are using for Northwood have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Northwood
- Northwood is located in Grand Forks County
- Population from the 2020 Census: 884 people
- Jump to TripAdvisor's Tourism page for Northwood <3>
- Holmes
(7 miles [11.3 km] to the east)
- Note: We haven't been able to verify our GPS coordinates for Holmes. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Holmes
- Holmes is located in Grand Forks County
- Kempton
(9 miles [14.5 km] to the northwest)
- Jump to our Gazetteer entry for Kempton
- Kempton is located in Grand Forks County
- Emerado
(14 miles [22.5 km] to the north)
- Note: The GPS coordinates that we are using for Emerado have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Emerado
- Emerado is located in Grand Forks County
- Population from the 2020 Census: 461 people
- Jump to TripAdvisor's Tourism page for Emerado <3>
- Arvilla
(14 miles [22.5 km] to the north)
- Portland
(15 miles [24.1 km] to the south)
- Larimore
(15 miles [24.1 km] to the northwest)
- Mayville
(16 miles [25.7 km] to the southeast)
- Reynolds
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Reynolds have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Reynolds
- Reynolds is located in Grand Forks County
- Population from the 2020 Census: 299 people
- Jump to TripAdvisor's Tourism page for Reynolds <3>
- Thompson
(16 miles [25.7 km] to the east)
- Note: The GPS coordinates that we are using for Thompson have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Thompson
- Thompson is located in Grand Forks County
- Population from the 2020 Census: 1,027 people
- Jump to TripAdvisor's Tourism page for Thompson <3>
- Buxton
(18 miles [29 km] to the southeast)
- Note: The GPS coordinates that we are using for Buxton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Buxton
- Buxton is located in Traill County
- Population from the 2020 Census: 316 people
- Jump to TripAdvisor's Tourism page for Buxton <3>
- Roseville
(19 miles [30.6 km] to the south)
- Jump to our Gazetteer entry for Roseville
- Roseville is located in Traill County
- Kelly
(20 miles [32.2 km] to the northeast)
- Note: We haven't been able to verify our GPS coordinates for Kelly. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Kelly
- Kelly is located in Grand Forks County
- Mekinock
(20 miles [32.2 km] to the north)
- Sherbrooke
(21 miles [33.8 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Sherbrooke. Although the coordinates have been estimated, they should be in the vicinity.<4>
- Jump to our Gazetteer entry for Sherbrooke
- Sherbrooke is located in Steele County
- Sharon
(22 miles [35.4 km] to the southwest)
- Finley
(22 miles [35.4 km] to the southwest)
- Cummings
(22 miles [35.4 km] to the southeast)
- Grand Forks
(22 miles [35.4 km] to the northeast)
- McCanna
(22 miles [35.4 km] to the northwest)
- Jump to our Gazetteer entry for McCanna
- McCanna is located in Grand Forks County
- Aneta
(24 miles [38.6 km] to the west)
- Clifford
(25 miles [40.2 km] to the south)
- Note: The GPS coordinates that we are using for Clifford have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Clifford
- Clifford is located in Traill County
- Population from the 2020 Census: 43 people
- Jump to TripAdvisor's Tourism page for Clifford <3>
- Gilby
(25 miles [40.2 km] to the north)
- East Grand Forks
(25 miles [40.2 km] to the northeast)
Off-the-Road Links ...
The official website for Grand Forks County: www.grandforkscountygov.com/ The official website for State of North Dakota: https://www.nd.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the Swenson Cemetery. The point we use is located at these GPS coordinates - Latitude: 47.7192, Longitude: -97.4579 In this case, the coordinates for the Swenson Cemetery have been provided by the Geographic Names Information System (GNIS). |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|