Nearby Communities
Introduction
Below you will find our list of the communities that are in the vicinity of the St. Anthony Cemetery.
Just a reminder ...
Since our focus is on geography, we don't have any burial or interment information. Nor do we have any contact information for the St. Anthony Cemetery. For information of that nature, we recommend you visit Find-A-Grave's entry for the St. Anthony Cemetery (FG ID #102389). <1>
List of Neighboring Communities ...
Below are the communities that are within 30 miles [48.3 km]<2> of the St. Anthony Cemetery. We've listed the following communities based on their distance, with the closest first.
- Donnybrook
(Less than 2 miles to the northwest)- Jump to our Gazetteer entry for Donnybrook
- Donnybrook is located in Ward County
- Population from the 2020 Census: 53 people
- Jump to TripAdvisor's Tourism page for Donnybrook <3>
- Google driving directions:
- From your current location to Donnybrook
- From the St. Anthony Cemetery to Donnybrook
- Coulee
(7 miles [11.3 km] to the northwest)- Jump to our Gazetteer entry for Coulee
- Coulee is located in Mountrail County
- Google driving directions:
- From your current location to Coulee
- From the St. Anthony Cemetery to Coulee
- Carpio
(8 miles [12.9 km] to the southeast)- Jump to our Gazetteer entry for Carpio
- Carpio is located in Ward County
- Population from the 2020 Census: 142 people
- Jump to TripAdvisor's Tourism page for Carpio <3>
- Google driving directions:
- From your current location to Carpio
- From the St. Anthony Cemetery to Carpio
- Blaisdell
(14 miles [22.5 km] to the southwest)- Jump to our Gazetteer entry for Blaisdell
- Blaisdell is located in Mountrail County
- Jump to TripAdvisor's Tourism page for Blaisdell <3>
- Google driving directions:
- From your current location to Blaisdell
- From the St. Anthony Cemetery to Blaisdell
- Berthold
(14 miles [22.5 km] to the southeast)- Jump to our Gazetteer entry for Berthold
- Berthold is located in Ward County
- Population from the 2020 Census: 491 people
- Jump to TripAdvisor's Tourism page for Berthold <3>
- Google driving directions:
- From your current location to Berthold
- From the St. Anthony Cemetery to Berthold
- Grano
(15 miles [24.1 km] to the northeast) - Kenmare
(15 miles [24.1 km] to the northwest)- Note: The GPS coordinates that we are using for Kenmare have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Kenmare
- Kenmare is located in Ward County
- Population from the 2020 Census: 1,026 people
- Jump to TripAdvisor's Tourism page for Kenmare <3>
- Norma
(16 miles [25.7 km] to the north)- Jump to our Gazetteer entry for Norma
- Norma is located in Renville County
- Google driving directions:
- From your current location to Norma
- From the St. Anthony Cemetery to Norma
- Foxholm
(16 miles [25.7 km] to the southeast)- Jump to our Gazetteer entry for Foxholm
- Foxholm is located in Ward County
- Google driving directions:
- From your current location to Foxholm
- From the St. Anthony Cemetery to Foxholm
- Tolley
(16 miles [25.7 km] to the north)- Note: The GPS coordinates that we are using for Tolley have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Tolley
- Tolley is located in Renville County
- Population from the 2020 Census: 49 people
- Jump to TripAdvisor's Tourism page for Tolley <3>
- Lonetree
(18 miles [29 km] to the southeast)- Jump to our Gazetteer entry for Lonetree
- Lonetree is located in Ward County
- Jump to TripAdvisor's Tourism page for Lonetree <3>
- Google driving directions:
- From your current location to Lonetree
- From the St. Anthony Cemetery to Lonetree
- Palermo
(19 miles [30.6 km] to the southwest)- Jump to our Gazetteer entry for Palermo
- Palermo is located in Mountrail County
- Population from the 2020 Census: 98 people
- Jump to TripAdvisor's Tourism page for Palermo <3>
- Google driving directions:
- From your current location to Palermo
- From the St. Anthony Cemetery to Palermo
- Niobe
(20 miles [32.2 km] to the northwest)- Jump to our Gazetteer entry for Niobe
- Niobe is located in Ward County
- Google driving directions:
- From your current location to Niobe
- From the St. Anthony Cemetery to Niobe
- Des Lacs
(21 miles [33.8 km] to the southeast)- Jump to our Gazetteer entry for Des Lacs
- Des Lacs is located in Ward County
- Population from the 2020 Census: 199 people
- Jump to TripAdvisor's Tourism page for Des Lacs <3>
- Google driving directions:
- From your current location to Des Lacs
- From the St. Anthony Cemetery to Des Lacs
- Lansford
(24 miles [38.6 km] to the east)- Note: The GPS coordinates that we are using for Lansford have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lansford
- Lansford is located in Bottineau County
- Population from the 2020 Census: 240 people
- Jump to TripAdvisor's Tourism page for Lansford <3>
- Mohall
(24 miles [38.6 km] to the northeast)- Note: The GPS coordinates that we are using for Mohall have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mohall
- Mohall is located in Renville County
- Population from the 2020 Census: 709 people
- Jump to TripAdvisor's Tourism page for Mohall <3>
- Burlington
(25 miles [40.2 km] to the southeast)- Jump to our Gazetteer entry for Burlington
- Burlington is located in Ward County
- Population from the 2020 Census: 1,198 people
- Jump to TripAdvisor's Tourism page for Burlington <3>
- Google driving directions:
- From your current location to Burlington
- From the St. Anthony Cemetery to Burlington
- Stanley
(26 miles [41.8 km] to the southwest)- Jump to our Gazetteer entry for Stanley
- Stanley is located in Mountrail County
- Population from the 2020 Census: 2,708 people
- Jump to TripAdvisor's Tourism page for Stanley <3>
- Google driving directions:
- From your current location to Stanley
- From the St. Anthony Cemetery to Stanley
- Ruthville
(27 miles [43.5 km] to the east)- Jump to our Gazetteer entry for Ruthville
- Ruthville is located in Ward County
- Google driving directions:
- From your current location to Ruthville
- From the St. Anthony Cemetery to Ruthville
- Bowbells
(27 miles [43.5 km] to the northwest)- Note: The GPS coordinates that we are using for Bowbells have been provided by the GNIS.<4> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bowbells
- Bowbells is located in Burke County
- Population from the 2020 Census: 338 people
- Jump to TripAdvisor's Tourism page for Bowbells <3>
- Loraine
(28 miles [45.1 km] to the northeast) - Glenburn
(29 miles [46.7 km] to the east)- Jump to our Gazetteer entry for Glenburn
- Glenburn is located in Renville County
- Population from the 2020 Census: 421 people
- Jump to TripAdvisor's Tourism page for Glenburn <3>
- Google driving directions:
- From your current location to Glenburn
- From the St. Anthony Cemetery to Glenburn
Off-the-Road Links ...
The official website for Ward County: www.co.ward.nd.us/
The official website for State of North Dakota: https://www.nd.gov/
Footnotes ...
| <1> | The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com. |
| <2> | Our distances are not driving distances, but are calculated as a 'point-to-point' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- ) to Point B.Our distance measurements begin at a specific point at the St. Anthony Cemetery. The point we use is located at these GPS coordinates - Latitude: 48.4997, Longitude: -101.8737 |
| <3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
| <4> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |