RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Dakota >> Pembina County >> Canton City >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Dakota

The Commemorative Quarter for North Dakota





TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Canton City. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Canton City.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Canton City - within 30 miles [48.3 km]<1>.

Our list sorts the communities in alphabetical order. There are 26 communities listed:

  • Adams
    (26 miles [41.8 km] to the southwest)
  • Altona
    (29 miles [46.7 km] to the north)
  • Bathgate
    (15 miles [24.1 km] to the northeast)
  • Cavalier
    (7 miles [11.3 km] to the north)
    • Note: The GPS coordinates that we are using for Cavalier have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cavalier
    • Cavalier is located in Pembina County
    • Population from the 2020 Census: 1,204 people
    • Jump to TripAdvisor's Tourism page for Cavalier <2>
  • Crystal
    (6 miles [9.7 km] to the south)
  • Drayton
    (23 miles [37 km] to the east)
  • Edinburg
    (16 miles [25.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Edinburg have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Edinburg
    • Edinburg is located in Walsh County
    • Population from the 2020 Census: 181 people
    • Jump to TripAdvisor's Tourism page for Edinburg <2>
  • Emerson
    (30 miles [48.3 km] to the northeast)
  • Fairdale
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Fairdale have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Fairdale
    • Fairdale is located in Walsh County
    • Population from the 2020 Census: 35 people
    • Jump to TripAdvisor's Tourism page for Fairdale <2>
  • Glasston
    (10 miles [16.1 km] to the east)
  • Grafton
    (22 miles [35.4 km] to the southeast)
  • Gretna
    (22 miles [35.4 km] to the north)
  • Hamilton
    (12 miles [19.3 km] to the northeast)
    • Note: The GPS coordinates that we are using for Hamilton have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hamilton
    • Hamilton is located in Pembina County
    • Population from the 2020 Census: 55 people
    • Jump to TripAdvisor's Tourism page for Hamilton <2>
  • Herrick
    (23 miles [37 km] to the southeast)
  • Hoople
    (10 miles [16.1 km] to the south)
    • Note: The GPS coordinates that we are using for Hoople have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hoople
    • Hoople is located in Walsh County
    • Population from the 2020 Census: 221 people
    • Jump to TripAdvisor's Tourism page for Hoople <2>
  • Lankin
    (28 miles [45.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lankin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lankin
    • Lankin is located in Walsh County
    • Population from the 2020 Census: 90 people
    • Jump to TripAdvisor's Tourism page for Lankin <2>
  • Milton
    (17 miles [27.4 km] to the west)
  • Minto
    (30 miles [48.3 km] to the southeast)
    • Note: The GPS coordinates that we are using for Minto have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Minto
    • Minto is located in Walsh County
    • Population from the 2020 Census: 582 people
    • Jump to TripAdvisor's Tourism page for Minto <2>
  • Mountain
    (8 miles [12.9 km] to the west)
    • Note: The GPS coordinates that we are using for Mountain have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mountain
    • Mountain is located in Pembina County
    • Population from the 2020 Census: 81 people
    • Jump to TripAdvisor's Tourism page for Mountain <2>
  • Neche
    (20 miles [32.2 km] to the north)
    • Note: The GPS coordinates that we are using for Neche have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Neche
    • Neche is located in Pembina County
    • Population from the 2020 Census: 338 people
    • Jump to TripAdvisor's Tourism page for Neche <2>
  • Osnabrock
    (22 miles [35.4 km] to the west)
    • Note: The GPS coordinates that we are using for Osnabrock have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Osnabrock
    • Osnabrock is located in Cavalier County
    • Population from the 2020 Census: 119 people
    • Jump to TripAdvisor's Tourism page for Osnabrock <2>
  • Park River
    (20 miles [32.2 km] to the south)
    • Note: The GPS coordinates that we are using for Park River have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Park River
    • Park River is located in Walsh County
    • Population from the 2020 Census: 1,305 people
    • Jump to TripAdvisor's Tourism page for Park River <2>
  • Pembina
    (27 miles [43.5 km] to the northeast)
    • Note: The GPS coordinates that we are using for Pembina have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pembina
    • Pembina is located in Pembina County
    • Population from the 2020 Census: 533 people
    • Jump to TripAdvisor's Tourism page for Pembina <2>
  • Pisek
    (26 miles [41.8 km] to the south)
  • Saint Thomas
    (11 miles [17.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Saint Thomas have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Saint Thomas
    • Saint Thomas is located in Pembina County
    • Population from the 2020 Census: 301 people
    • Jump to TripAdvisor's Tourism page for Saint Thomas <2>
  • Walhalla
    (19 miles [30.6 km] to the northwest)

Unfortunately, we don't know of an official website for Canton City. If you can help, please contact us through our Feedback Page.

The official website for State of North Dakota: www.nd.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Canton City) to Point B.Our distance measurements begin at a specific point in Canton City. The point we use is located at these GPS coordinates - Latitude: 48.6881, Longitude: -97.6673    
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.




 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024