Census Data for Anamoose ...
The most recent Census Estimate<1> was for 2019 and it gave Anamoose a population of 244 people.
The last Decennial Census<2> was in 2010, which gave Anamoose a population of 227 people.
The city of Anamoose is located in McHenry County. The 2010 Census gave McHenry County; a population of 5,395 people. This means that Anamoose had 4.21% of the county's total population, making it McHenry's 5th most populous community.
At the same time, North Dakota had a population of 672,591 people, meaning that Anamoose had 0.03% of the total population of North Dakota - making it the state's 191st most populous community.
The 2010 Census shows that the sampling area for Anamoose has a total area of 0.62 square miles [1.6 km²]. Of this total, 0.61 square miles [1.6 km²] is land, with the balance (1.29%) being water (0 square miles [0 km²]).
McHenry County has a land area of 1,873 square miles [4,853.5 km²]. At 0.61 square miles [1.6 km²], Anamoose has 0.03% of the county's total land area.
- Continue Reading ...
- When the Census Bureau conducts a census for a city like Anamoose, they draw a boundary around the area in which they are going to conduct their count - this defines the sampling area (usually a polygon). The shape of the sampling area can be quite complex and it's important to keep in mind that the boundaries of the sampling area may or may not match the recognized boundaries of the city.
- Things like population, area and housing for Anamoose reflect the sampling area. Since the shape of the sampling area and the actual boundaries of Anamoose might be different, it's best to check with the U.S. Census Bureau to resolve any difference between the two.
- Not only does the sampling area define boundaries, it also has a GPS location (latitude & longitude) that indicates a point within the sampling area (usually the center of the polygon, known as the centroid). At the time of the 2010 Census, the sampling area was located at:
- Lat: 47° 52' 59" (or 47.88°)
- Lon: -100° 14' 32" (or -100.24°)
- More information on this topic and the changes between the 2000 Census and the 2010 Census can be found in the section for our Census-to-Census Observations ... (see below).
Housing Units ...
At the time of the 2010 Census, Anamoose had 140 Housing Units<3> and with its population of 227 people, this averages 1.62 people per Housing Unit.
- Continue Reading ...
- The 2010 Census shows Anamoose had a land area of 0.61 square miles [1.6 km²]. This translates to 225.1 Housing Units per square mile [86.9 housing units/km²].
- From the Census of 2000: Anamoose had 149 Housing Units, a population of 282 people and a land area of 0.62 square miles [1.6 km²]. This gives a density of 1.89 people per Housing Unit and 237.4 Housing Units per square mile [91.7 housing units/km²].
- Note: Repeating the caution above (under Population Density), be aware that when comparing Housing Units between the 2010 and the 2000 Census, there were changes in the sampling area for Anamoose and you need to be careful when comparing between the censuses. More information about the changes can be found in the section called Census-to-Census Observations ... (see below).
McHenry County ...
The city of Anamoose is located in McHenry County<4>.
The county had a population of 5,395 people at the 2010 Census. With it's population of 227 people, Anamoose represented 4.21% of the county's total.
In addition, where the city of Anamoose has a population density of 365 people per square mile [140.9 people/km²], McHenry County averages 2.88 people per square mile [1.11 people/km²].
For more information, please visit our Census Page for McHenry County.
Census-to-Census Observations ...
When the Census Bureau takes a census count (or enumeration) for Anamoose, they start by specifying the boundaries of the area to be counted. This area (or sampling area) is a polygon and its shape can be quite complex - it may or may not match the geographical boundaries of Anamoose. It's important to note that from one Census to the next, the shape and location of the polygon can change.
- Continue Reading ...
- Although we don't have specific information about the shape of the polygon for Anamoose or how it changed has over time, there is some information that can give us some hints. For example, since the shape of the sampling area is directly related to the shape of the polygon, any change to area probably indicates a new shape for the polygon.
- If you need precision or details about the methodology of the Census, you should visit the U.S. Census Bureau for a definitive answer.
While generally coinciding with the GPS location (latitude/longitude) of Anamoose, the latitude and longitude given by the Census Bureau actually indicates the GPS location of the polygon for Anamoose.
- Continue Reading ...
- For the 2010 Census, the location was given as:
- Lat: 47.883068° (or 47°52'59" N)
- Lon: -100.242260° (or -100°14'32" W)
- For the 2000 Census, the location given was:
- Lat: 47.881153° (or 47°52'52" N)
- Lon: -100.241860° (or -100°14'30" W)
- The difference indicates that the U.S. Census Bureau moved the location of the polygon for the 2010 Census 704 feet to the north<5> of the location that was used in the 2000 Census.
- The U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names (BGN) have assigned a unique GNIS identifier (#1035910) to Anamoose. This identifier also marks a GPS point on the map, and that point lies within the boundaries of Anamoose. The GNIS point has been mapped to the latitude/longitude:
- Lat: 47.883056° (or 47°52'59" N)
- Lon: -100.241802° (or -100°14'30" W)
- The GPS location given for the 2010 Census lies 112.1 feet to the west<6> of the point given by the GNIS for Anamoose. For more information about this and the relationship of the various Federal Codes, please visit our Misc Page for Anamoose.
Miscellaneous Information for Anamoose ...
The Federal government has assigned various identifying codes to each community, county and state. At one time or another, the US Census Bureau has used one (or more) of the following identifiers when referring to either McHenry County or the city of Anamoose:
- The GNIS Codes ...
- The current system of identification is called the Geographic Names Information System (GNIS). The following GNIS codes relate to Anamoose:
- GNIS ID for Anamoose: 1035910
- GNIS ID for McHenry County: 1035305
- GNIS ID for State of North Dakota: 1779797
- Misc. Census Codes ...
- Anamoose is located in Census Region #2 (the Midwest Region) and Division #4 (the West North-Central Division).
For more information about the various Federal identification codes, please visit our Misc Page for Anamoose.
Other Roadside Stops ...
Find a Community within North Dakota
About McHenry County
About North Dakota
Off-the-Road Links ...
Unfortunately, we don't know of a website for Anamoose. If you can help, please contact us through our Feedback Page.
The official website for State of North Dakota: www.nd.gov/
The official website of the U.S. Census Bureau
The official website of the U.S. Board on Geographic Names (BGN)
The official website of the U.S. Geological Survey (USGS)
|<1>||Every year, the US Census Bureau creates a population estimate for the preceeding year. Keep in mind that this value is an estimate and not an actual count. The most recent Census estimate is for the year 2019.|
|<2>||Every 10 years (eg- 1990, 2000, 2010), the US Census Bureau conducts a Constitutionally-mandated count (or enumeration) of people living within the United States. This count is called a Decennial Census. The last Decennial Census was the 2010 Census, with the next one planned for 2020.|
|<3>||A Housing Unit is a broad term for those places where people live (whether occupied or temporarily vacant), such as a house, an apartment, a mobile home, or an area that is considered as a separate living quarter. Separate living quarters (consisting of one or more rooms) are considered to be those places where people live, sleep and eat separately from others and that have access to the outside (either directly or by a shared hallway).|
|<4>||If you're interested in how the shape of North Dakota's counties, including McHenry, have changed over time, we recommend the Atlas of Historical County Boundaries.|
|<5>||The calculated bearing (or angle) to the 2010 Census location is 7 degrees and a distance of 704 feet.|
|<6>||The calculated bearing (or angle) to the GNIS point is 87 degrees and a distance of 112.1 feet.|