RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Cumberland County >> Williams Village >> Nearby Communities - 1890sIndex...










Learn About
The Commemorative
Quarter for
North Carolina


The Commemorative Quarter for North Carolina







Nearby Communities in the 1890s


We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.

If it applies, we indicate whether a community no longer exists and is now historic.<1>

While we didn't find Williams Village in the Atlas, the following communities of the 1890's would have been found near the current location of Williams Village. The following communities are listed based on their distance, with the one closest to Williams Village listed first.

  • Fayetteville
    (Less than 2 miles to the north)
  • Vander
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Vander have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Vander
    • Vander is located in Cumberland County
  • Cumberland
    (5 miles [8 km] to the west)
  • Hope Mills
    (5 miles [8 km] to the southwest)
    • Note: The GPS coordinates that we are using for Hope Mills have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hope Mills
    • Hope Mills is located in Cumberland County
    • Population from the 2020 Census: 15,848 people
    • Jump to TripAdvisor's Tourism page for Hope Mills <2>
  • Grays Creek
    (5 miles [8 km] to the south)
    • Note: The GPS coordinates that we are using for Grays Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Grays Creek
    • Grays Creek is located in Cumberland County
  • Roslin
    (8 miles [12.9 km] to the southwest)
    • Note: The GPS coordinates that we are using for Roslin have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Roslin
    • Roslin is located in Cumberland County
  • Cedar Creek
    (8 miles [12.9 km] to the southeast)
    • Note: The GPS coordinates that we are using for Cedar Creek have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cedar Creek
    • Cedar Creek is located in Cumberland County
  • Stedman
    (9 miles [14.5 km] to the east)
  • Wade
    (11 miles [17.7 km] to the northeast)
    • Jump to our Gazetteer entry for Wade
    • Wade is located in Cumberland County
    • Population from the 2020 Census: 588 people
    • Jump to TripAdvisor's Tourism page for Wade <2>
  • Autryville
    (13 miles [20.9 km] to the east)
    • Jump to our Gazetteer entry for Autryville
    • Autryville is located in Sampson County
    • Population from the 2020 Census: 191 people
  • Manchester
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Manchester have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Manchester
    • Manchester is located in Cumberland County
  • Carlos
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Carlos have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Carlos
    • Carlos is located in Cumberland County
  • Clement
    (14 miles [22.5 km] to the east)
    • Note: The GPS coordinates that we are using for Clement have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Clement
    • Clement is located in Sampson County
  • Lumber Bridge
    (15 miles [24.1 km] to the southwest)
    • Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lumber Bridge
    • Lumber Bridge is located in Robeson County
    • Population from the 2020 Census: 87 people
  • Jerome
    (15 miles [24.1 km] to the southeast)
    • Note: The GPS coordinates that we are using for Jerome have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Jerome
    • Jerome is located in Bladen County
  • Saint Pauls
    (16 miles [25.7 km] to the south)
  • Hayne
    (16 miles [25.7 km] to the east)
    • Note: The GPS coordinates that we are using for Hayne have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hayne
    • Hayne is located in Sampson County
  • Godwin
    (16 miles [25.7 km] to the northeast)
  • Tolarsville
    (18 miles [29 km] to the south)
    • Note: The GPS coordinates that we are using for Tolarsville have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tolarsville
    • Tolarsville is located in Robeson County
  • Shannon
    (19 miles [30.6 km] to the southwest)
    • Jump to our Gazetteer entry for Shannon
    • Shannon is located in Robeson County
  • Averasboro ‑ Historic
    (19 miles [30.6 km] to the northeast)
    • Jump to our Gazetteer entry for Averasboro
    • Averasboro is located in Harnett County
  • Bunnlevel
    (19 miles [30.6 km] to the north)
    • Jump to our Gazetteer entry for Bunnlevel
    • Bunnlevel is located in Harnett County
  • Roseboro
    (20 miles [32.2 km] to the east)
  • Huntley
    (20 miles [32.2 km] to the east)
    • Note: The GPS coordinates that we are using for Huntley have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Huntley
    • Huntley is located in Sampson County
  • Mingo
    (20 miles [32.2 km] to the northeast)
    • Note: The GPS coordinates that we are using for Mingo have been provided by the GNIS.<3> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mingo
    • Mingo is located in Sampson County
  • Spout Springs
    (20 miles [32.2 km] to the northwest)
    • Jump to our Gazetteer entry for Spout Springs
    • Spout Springs is located in Harnett County

The official website for Cumberland County: www.co.cumberland.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Williams Village, please let us know so that we can improve our accuracy.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 10 Mar 2024