Nearby Communities in the 1890s
We largely built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. Over time, we will continue to add communities that we find during our research.
If it applies, we indicate whether a community no longer exists and is now historic.<1>
The Rand McNally Atlas shows that Swan Quarter had a population of 96 people in 1895 with a post office and no railroad service.
The following communities are listed based on their distance from Swan Quarter, with the one closest to Swan Quarter listed first.
- Scranton
(9 miles [14.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Scranton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Scranton
- Scranton is located in Hyde County
- Sladesville
(9 miles [14.5 km] to the northwest)
- Fairfield
(11 miles [17.7 km] to the northeast)
- Note: The GPS coordinates that we are using for Fairfield have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fairfield
- Fairfield is located in Hyde County
- Jump to TripAdvisor's Tourism page for Fairfield <4>
- Makleyville
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Makleyville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Makleyville
- Makleyville is located in Hyde County
- Leechville
(14 miles [22.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Leechville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Leechville
- Leechville is located in Beaufort County
- Lake Landing
(15 miles [24.1 km] to the east)
- Hobucken
(17 miles [27.4 km] to the southwest)
- Note: The GPS coordinates that we are using for Hobucken have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hobucken
- Hobucken is located in Pamlico County
- Middletown
(18 miles [29 km] to the east)
- Note: The GPS coordinates that we are using for Middletown have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Middletown
- Middletown is located in Hyde County
- Engelhard
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Engelhard have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Engelhard
- Engelhard is located in Hyde County
- Jump to TripAdvisor's Tourism page for Engelhard <4>
- Ransomville
(20 miles [32.2 km] to the west)
- South Creek
(21 miles [33.8 km] to the west)
- Note: The GPS coordinates that we are using for South Creek have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for South Creek
- South Creek is located in Beaufort County
- Mesic
(22 miles [35.4 km] to the southwest)
- Pungo
(22 miles [35.4 km] to the northwest)
- Note: We haven't been able to verify our GPS coordinates for Pungo. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Pungo
- Pungo is located in Beaufort County
- Google driving directions:
- From your current location to Pungo
- From Swan Quarter to Pungo
- Pantego
(22 miles [35.4 km] to the northwest)
- Note: The GPS coordinates that we are using for Pantego have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Pantego
- Pantego is located in Beaufort County
- Population from the 2020 Census: 175 people
- Vandemere
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Vandemere have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vandemere
- Vandemere is located in Pamlico County
- Population from the 2020 Census: 243 people
- Florence
(24 miles [38.6 km] to the southwest)
- Note: The GPS coordinates that we are using for Florence have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Florence
- Florence is located in Pamlico County
- Gum Neck
(24 miles [38.6 km] to the northeast)
- Note: The GPS coordinates that we are using for Gum Neck have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gum Neck
- Gum Neck is located in Tyrrell County
- Yeatesville
(24 miles [38.6 km] to the west)
- Note: The GPS coordinates that we are using for Yeatesville have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Yeatesville
- Yeatesville is located in Beaufort County
- Aurora
(26 miles [41.8 km] to the west)
- Maribel
(26 miles [41.8 km] to the southwest)
- Note: The GPS coordinates that we are using for Maribel have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maribel
- Maribel is located in Pamlico County
- Idalia
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Idalia have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Idalia
- Idalia is located in Beaufort County
- Portsmouth
(27 miles [43.5 km] to the southeast)
- Gaylord
(27 miles [43.5 km] to the northwest)
- Note: The GPS coordinates that we are using for Gaylord have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Gaylord
- Gaylord is located in Beaufort County
- Bath
(27 miles [43.5 km] to the west)
- Note: The GPS coordinates that we are using for Bath have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bath
- Bath is located in Beaufort County
- Population from the 2020 Census: 241 people
- Jump to TripAdvisor's Tourism page for Bath <4>
- Pamlico
(28 miles [45.1 km] to the southwest)
- Note: We haven't been able to verify our GPS coordinates for Pamlico. Although the coordinates have been estimated, they should be in the vicinity.<3>
- Jump to our Gazetteer entry for Pamlico
- Pamlico is located in Pamlico County
- Google driving directions:
- From your current location to Pamlico
- From Swan Quarter to Pamlico
- Roe
(28 miles [45.1 km] to the south)
- Note: The GPS coordinates that we are using for Roe have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Roe
- Roe is located in Carteret County
- Ocracoke
(28 miles [45.1 km] to the southeast)
- Note: The GPS coordinates that we are using for Ocracoke have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ocracoke
- Ocracoke is located in Hyde County
- Jump to TripAdvisor's Tourism page for Ocracoke <4>
Off-the-Road Links ...
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Swan Quarter, please let us know so that we can improve our accuracy. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<4> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |