RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Rutherford County >> Spindale >> Genealogy HelperIndex...










Learn About
The Commemorative
Quarter for
North Carolina


The Commemorative Quarter for North Carolina







Our Genealogy Helper

Introduction ...

We have a couple of goals for our Gazetteer:

  • That it be a tool which helps us with planning our trips.
  • We're trying to shape our Gazetteer as a tool to help us understand the community in which our ancestors lived, the community that was part of their daily lives.
  • On our trips, we try to visit those places where our ancestors left their footprints.

By learning about Spindale (and the surrounding area) during the time that our ancestors lived, we hope to have a better understanding of both their community and its relationship to their lifes. We hope that this tool helps to give us an insight into their world.

As we add data and organize our Gazetteer to help with our family research, we will be adding to this our Genealogical Helper for Spindale. While we don't have information that is specific to any given person or family, we intend to expand our understanding about where and how people lived.

Neighboring Counties ...

When searching for family records, we have frequently made the mistake of not checking the neighboring counties.

For example, we have great-grandparents who lived in the southwest corner of their home county. During their lives, most hospitals and doctors were in the next county to the west. Almost all of the nearby churches and cemeteries were in the county to the south.

So when searching for records, we had our best success by looking in neighboring counties instead of the county in which they lived:  their home county contained property and probate records; the county to the west contained birth and death records; the county to the south contained their burial records. If we hadn't included the neighboring counties, we would have missed many valuable sources of information.

If you're in a similar situation, we hope that the following information helps.

Spindale is located in Rutherford County.

To see how the shape of North Carolina's counties have changed over time, we recommend the Atlas of Historical County Boundaries.

The following counties adjoin and form the boundaries of Rutherford County: Buncombe, Burke, Cleveland, Henderson, McDowell, Polk, Cherokee (SC) & Spartanburg (SC).

Below are the counties that are near Spindale. For each of these counties, we show a sample of those communities that are closest to Spindale:

  • Rutherford County     (The home county of Spindale)
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Bakersville
      (Less than 2 miles to the south)
      • Jump to our Gazetteer entry for Bakersville
      • Bakersville is located in Rutherford County
    • Ruth
      (Less than 2 miles to the northwest)
      • Note: The GPS coordinates that we are using for Ruth have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Ruth
      • Ruth is located in Rutherford County
      • Population from the 2020 Census: 400 people
    • Rutherfordton
      (2 miles [3.2 km] to the west)
    • Forest City
      (3 miles [4.8 km] to the southeast)
    • Bostic
      (4 miles [6.4 km] to the east)
      • Note: The GPS coordinates that we are using for Bostic have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Bostic
      • Bostic is located in Rutherford County
      • Population from the 2020 Census: 379 people
      • Jump to TripAdvisor's Tourism page for Bostic <2>
    • Shiloh
      (4 miles [6.4 km] to the south)
      • Note: The GPS coordinates that we are using for Shiloh have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shiloh
      • Shiloh is located in Rutherford County
    • Alexander Mills
      (4 miles [6.4 km] to the southeast)
      • Note: The GPS coordinates that we are using for Alexander Mills have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Alexander Mills
      • Alexander Mills is located in Rutherford County
    • Concord
      (5 miles [8 km] to the east)
      • Note: The GPS coordinates that we are using for Concord have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Concord
      • Concord is located in Rutherford County
    • Washburn
      (6 miles [9.7 km] to the east)
      • Jump to our Gazetteer entry for Washburn
      • Washburn is located in Rutherford County
    • Sandy Mush
      (6 miles [9.7 km] to the southeast)
      • Jump to our Gazetteer entry for Sandy Mush
      • Sandy Mush is located in Rutherford County
    • Mount Pisgah ‑ Historic
      (7 miles [11.3 km] to the north)
      • Note: The GPS coordinates that we are using for Mount Pisgah have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mount Pisgah
      • Mount Pisgah is located in Rutherford County
    • Holly Springs
      (7 miles [11.3 km] to the south)
      • Note: The GPS coordinates that we are using for Holly Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Holly Springs
      • Holly Springs is located in Rutherford County
  • Buncombe County
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Ridgecrest
      (27 miles [43.5 km] to the northwest)
    • Black Mountain
      (28 miles [45.1 km] to the northwest)
      • Note: The GPS coordinates that we are using for Black Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Black Mountain
      • Black Mountain is located in Buncombe County
      • Population from the 2020 Census: 8,256 people
      • Jump to TripAdvisor's Tourism page for Black Mountain <2>
    • Montreat
      (29 miles [46.7 km] to the northwest)
      • Note: The GPS coordinates that we are using for Montreat have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Montreat
      • Montreat is located in Buncombe County
      • Population from the 2020 Census: 939 people
      • Jump to TripAdvisor's Tourism page for Montreat <2>
    • Walkertown
      (30 miles [48.3 km] to the northwest)
      • Note: The GPS coordinates that we are using for Walkertown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Walkertown
      • Walkertown is located in Buncombe County
  • Burke County
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Brindletown
      (19 miles [30.6 km] to the north)
      • Jump to our Gazetteer entry for Brindletown
      • Brindletown is located in Burke County
    • Parkhill
      (25 miles [40.2 km] to the north)
      • Jump to our Gazetteer entry for Parkhill
      • Parkhill is located in Burke County
    • Camp Creek
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Camp Creek have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Camp Creek
      • Camp Creek is located in Burke County
    • Enola
      (25 miles [40.2 km] to the northeast)
      • Note: The GPS coordinates that we are using for Enola have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Enola
      • Enola is located in Burke County
    • Ramsey
      (25 miles [40.2 km] to the northeast)
      • Jump to our Gazetteer entry for Ramsey
      • Ramsey is located in Burke County
    • Glen Alpine
      (26 miles [41.8 km] to the north)
      • Note: The GPS coordinates that we are using for Glen Alpine have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glen Alpine
      • Glen Alpine is located in Burke County
      • Population from the 2020 Census: 1,487 people
      • Jump to TripAdvisor's Tourism page for Glen Alpine <2>
    • Salem
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Salem have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Salem
      • Salem is located in Burke County
    • Shoups Ford
      (26 miles [41.8 km] to the northeast)
      • Note: The GPS coordinates that we are using for Shoups Ford have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Shoups Ford
      • Shoups Ford is located in Burke County
    • Yellow Gap
      (27 miles [43.5 km] to the northeast)
      • Jump to our Gazetteer entry for Yellow Gap
      • Yellow Gap is located in Burke County
    • Magnolia
      (28 miles [45.1 km] to the northeast)
      • Note: The GPS coordinates that we are using for Magnolia have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Magnolia
      • Magnolia is located in Burke County
    • Morganton
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Morganton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Morganton
      • Morganton is located in Burke County
      • Population from the 2020 Census: 16,625 people
      • Jump to TripAdvisor's Tourism page for Morganton <2>
    • Linville
      (30 miles [48.3 km] to the north)
      • Note: The GPS coordinates that we are using for Linville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Linville
      • Linville is located in Burke County
  • Catawba County
    • Cooksville
      (29 miles [46.7 km] to the northeast)
      • Note: The GPS coordinates that we are using for Cooksville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cooksville
      • Cooksville is located in Catawba County
  • Cleveland County
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Cliffside
      (12 miles [19.3 km] to the southeast)
      • Note: The GPS coordinates that we are using for Cliffside have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Cliffside
      • Cliffside is located in Cleveland County
    • Mooresboro
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for Mooresboro have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mooresboro
      • Mooresboro is located in Cleveland County
      • Population from the 2020 Census: 316 people
    • New House
      (13 miles [20.9 km] to the east)
      • Note: The GPS coordinates that we are using for New House have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for New House
      • New House is located in Cleveland County
    • Lattimore
      (15 miles [24.1 km] to the east)
      • Note: The GPS coordinates that we are using for Lattimore have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lattimore
      • Lattimore is located in Cleveland County
      • Population from the 2020 Census: 454 people
    • Polkville
      (16 miles [25.7 km] to the east)
      • Note: The GPS coordinates that we are using for Polkville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Polkville
      • Polkville is located in Cleveland County
      • Population from the 2020 Census: 552 people
    • Boiling Springs
      (16 miles [25.7 km] to the southeast)
    • Kingstown
      (17 miles [27.4 km] to the east)
      • Note: The GPS coordinates that we are using for Kingstown have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Kingstown
      • Kingstown is located in Cleveland County
      • Population from the 2020 Census: 682 people
    • Flint Hill ‑ Historic
      (18 miles [29 km] to the southeast)
      • Note: The GPS coordinates that we are using for Flint Hill came from an uncertain source and they still need to be verified:<3>
      • Jump to our Gazetteer entry for Flint Hill
      • Flint Hill is located in Cleveland County
    • Dover
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Dover have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dover
      • Dover is located in Cleveland County
    • Lawndale
      (20 miles [32.2 km] to the east)
      • Note: The GPS coordinates that we are using for Lawndale have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lawndale
      • Lawndale is located in Cleveland County
      • Population from the 2020 Census: 589 people
      • Jump to TripAdvisor's Tourism page for Lawndale <2>
    • Casar
      (20 miles [32.2 km] to the northeast)
      • Jump to our Gazetteer entry for Casar
      • Casar is located in Cleveland County
      • Population from the 2020 Census: 292 people
      • Jump to TripAdvisor's Tourism page for Casar <2>
    • Erwinsville ‑ Historic
      (20 miles [32.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for Erwinsville have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Erwinsville
      • Erwinsville is located in Cleveland County
  • Gaston County
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Dellview
      (28 miles [45.1 km] to the east)
      • Note: The GPS coordinates that we are using for Dellview have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dellview
      • Dellview is located in Gaston County
      • Population from the 2010 Census: 13 people
    • Cherryville
      (30 miles [48.3 km] to the east)
  • Henderson County
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Bat Cave
      (21 miles [33.8 km] to the west)
    • Dana
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Dana have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Dana
      • Dana is located in Henderson County
    • Gerton
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Gerton have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Gerton
      • Gerton is located in Henderson County
      • Jump to TripAdvisor's Tourism page for Gerton <2>
    • Saluda
      (25 miles [40.2 km] to the west)
      • Note: The GPS coordinates that we are using for Saluda have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Saluda
      • Saluda is located in Henderson County
      • Population from the 2020 Census: 703 people
      • Jump to TripAdvisor's Tourism page for Saluda <2>
    • Upward
      (26 miles [41.8 km] to the west)
      • Jump to our Gazetteer entry for Upward
      • Upward is located in Henderson County
    • U-No
      (27 miles [43.5 km] to the west)
      • Jump to our Gazetteer entry for U-No
      • U-No is located in Henderson County
    • East Flat Rock
      (28 miles [45.1 km] to the west)
      • Note: The GPS coordinates that we are using for East Flat Rock have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Flat Rock
      • East Flat Rock is located in Henderson County
      • Jump to TripAdvisor's Tourism page for East Flat Rock <2>
    • Zirconia
      (28 miles [45.1 km] to the west)
    • Barker Heights
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Barker Heights have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Barker Heights
      • Barker Heights is located in Henderson County
    • Carolina Village
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Carolina Village have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Carolina Village
      • Carolina Village is located in Henderson County
    • Claremont
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Claremont have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Claremont
      • Claremont is located in Henderson County
    • Flat Rock
      (29 miles [46.7 km] to the west)
      • Note: The GPS coordinates that we are using for Flat Rock have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Flat Rock
      • Flat Rock is located in Henderson County
      • Population from the 2020 Census: 3,408 people
      • Jump to TripAdvisor's Tourism page for Flat Rock <2>
  • Lincoln County
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • North Brook ‑ Historic
      (26 miles [41.8 km] to the east)
      • Note: The GPS coordinates that we are using for North Brook have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for North Brook
      • North Brook is located in Lincoln County
    • Laurel Hill
      (27 miles [43.5 km] to the northeast)
      • Note: The GPS coordinates that we are using for Laurel Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Laurel Hill
      • Laurel Hill is located in Lincoln County
  • McDowell County
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Vein Mountain
      (13 miles [20.9 km] to the north)
      • Note: The GPS coordinates that we are using for Vein Mountain have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Vein Mountain
      • Vein Mountain is located in McDowell County
    • Mountain Home ‑ Historic
      (15 miles [24.1 km] to the north)
      • Note: The GPS coordinates that we are using for Mountain Home have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mountain Home
      • Mountain Home is located in McDowell County
    • Sugar Hill
      (16 miles [25.7 km] to the northwest)
      • Jump to our Gazetteer entry for Sugar Hill
      • Sugar Hill is located in McDowell County
    • Glenwood
      (17 miles [27.4 km] to the north)
      • Note: The GPS coordinates that we are using for Glenwood have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Glenwood
      • Glenwood is located in McDowell County
    • Patten
      (20 miles [32.2 km] to the north)
      • Jump to our Gazetteer entry for Patten
      • Patten is located in McDowell County
    • Providence
      (20 miles [32.2 km] to the north)
      • Note: The GPS coordinates that we are using for Providence have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Providence
      • Providence is located in McDowell County
    • West Marion
      (21 miles [33.8 km] to the north)
      • Note: The GPS coordinates that we are using for West Marion have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for West Marion
      • West Marion is located in McDowell County
    • Marion
      (22 miles [35.4 km] to the north)
      • Note: The GPS coordinates that we are using for Marion have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Marion
      • Marion is located in McDowell County
      • Population from the 2020 Census: 7,937 people
      • Jump to TripAdvisor's Tourism page for Marion <2>
    • Lackey Town
      (22 miles [35.4 km] to the northwest)
      • Note: The GPS coordinates that we are using for Lackey Town have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lackey Town
      • Lackey Town is located in McDowell County
    • Moffitt Hill
      (22 miles [35.4 km] to the northwest)
      • Jump to our Gazetteer entry for Moffitt Hill
      • Moffitt Hill is located in McDowell County
    • Greenlee
      (23 miles [37 km] to the northwest)
      • Jump to our Gazetteer entry for Greenlee
      • Greenlee is located in McDowell County
    • Old Fort
      (23 miles [37 km] to the northwest)
      • Note: The GPS coordinates that we are using for Old Fort have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Old Fort
      • Old Fort is located in McDowell County
      • Population from the 2020 Census: 924 people
      • Jump to TripAdvisor's Tourism page for Old Fort <2>
  • Polk County
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Mill Spring
      (14 miles [22.5 km] to the west)
      • Note: The GPS coordinates that we are using for Mill Spring have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Mill Spring
      • Mill Spring is located in Polk County
      • Jump to TripAdvisor's Tourism page for Mill Spring <2>
    • Columbus
      (17 miles [27.4 km] to the southwest)
    • Lynn
      (19 miles [30.6 km] to the southwest)
      • Note: The GPS coordinates that we are using for Lynn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Lynn
      • Lynn is located in Polk County
    • Tryon
      (20 miles [32.2 km] to the southwest)
  • Cherokee County (SC)
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Chesnee
      (15 miles [24.1 km] to the south)
      • Jump to our Gazetteer entry for Chesnee
      • Chesnee is located in Cherokee County (SC)
      • Population from the 2020 Census: 942 people
      • Jump to TripAdvisor's Tourism page for Chesnee <2>
    • Macedonia
      (21 miles [33.8 km] to the southeast)
      • Jump to our Gazetteer entry for Macedonia
      • Macedonia is located in Cherokee County (SC)
    • East Gaffney
      (25 miles [40.2 km] to the southeast)
      • Note: The GPS coordinates that we are using for East Gaffney have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for East Gaffney
      • East Gaffney is located in Cherokee County (SC)
    • Gaffney
      (25 miles [40.2 km] to the southeast)
      • Jump to our Gazetteer entry for Gaffney
      • Gaffney is located in Cherokee County (SC)
      • Population from the 2020 Census: 12,695 people
      • Jump to TripAdvisor's Tourism page for Gaffney <2>
    • Blacksburg
      (28 miles [45.1 km] to the southeast)
  • Greenville County (SC)
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Gowensville
      (24 miles [38.6 km] to the southwest)
      • Jump to our Gazetteer entry for Gowensville
      • Gowensville is located in Greenville County (SC)
    • Highland
      (29 miles [46.7 km] to the southwest)
      • Jump to our Gazetteer entry for Highland
      • Highland is located in Greenville County (SC)
  • Spartanburg County (SC)
    • The following are listed by their distance from Spindale, with the one closest to Spindale listed first.
    • Brooklyn
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Brooklyn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brooklyn
      • Brooklyn is located in Spartanburg County (SC)
    • Fingerville
      (16 miles [25.7 km] to the south)
    • Mayo
      (19 miles [30.6 km] to the south)
    • Landrum
      (19 miles [30.6 km] to the southwest)
      • Jump to our Gazetteer entry for Landrum
      • Landrum is located in Spartanburg County (SC)
      • Population from the 2020 Census: 2,725 people
      • Jump to TripAdvisor's Tourism page for Landrum <2>
    • Boiling Springs
      (21 miles [33.8 km] to the south)
    • Campobello
      (21 miles [33.8 km] to the southwest)
    • Gramling
      (22 miles [35.4 km] to the southwest)
    • Valley Falls
      (23 miles [37 km] to the south)
    • Inman
      (23 miles [37 km] to the southwest)
      • Jump to our Gazetteer entry for Inman
      • Inman is located in Spartanburg County (SC)
      • Population from the 2020 Census: 2,480 people
      • Jump to TripAdvisor's Tourism page for Inman <2>
    • Cowpens
      (24 miles [38.6 km] to the south)
      • Jump to our Gazetteer entry for Cowpens
      • Cowpens is located in Spartanburg County (SC)
      • Population from the 2020 Census: 2,465 people
      • Jump to TripAdvisor's Tourism page for Cowpens <2>
    • Inman Mills
      (24 miles [38.6 km] to the southwest)
      • Jump to our Gazetteer entry for Inman Mills
      • Inman Mills is located in Spartanburg County (SC)
    • Converse
      (25 miles [40.2 km] to the south)

For an expanded list of the communities that are closest to Spindale, see our County-by-County Page for Spindale.

Newspapers Published in the Vicinity of Spindale ...

An ongoing effort between the Library of Congress and the National Endowment for the Humanities (NEH) has resulted in the National Digital Newspaper Program (NDNP).

To share their results, the partnership has created the Chronicling America website. The goal of this partnership is to assemble a database about the current and historic newspapers of the United States. This includes a growing collection of scanned images from selected papers. All of it available to the public on their website.

Using information that we've taken from the Chronicling America website, we've identified 35 newspapers that have been published in the area around Spindale.

We have organized these newspapers into two lists:

  • A Local Newspaper List - focusing on the papers published in the immediate area of Spindale. There are actually two parts to this list - papers printed in the immediate area of Spindale and those printed in the larger area surrounding Spindale.
  • An Extended Newspaper List - a longer list, sorted by paper name and containing those papers published within 19 miles [30.6 km]<4> of Spindale.

Websites to Help With Your Genealogy Research ...

When we do our genealogical research, we like to start with the websites from Cyndi's List, FamilySearch and Genealogy Trails. These websites either offer the information directly or else point to where you can find it. Their information is open to everyone.

To help you get started, the following links will take you to the pages that are relevant to Spindale:

Cemeteries Near Spindale ...

Below are cemeteries that are in the vicinity of Spindale.

This is a new section and is likely to have errors. If you find an error, such as a missing cemetery or we have the wrong name, please let us know. If you know of them, we would also appreciate learning about previous or alternate names.

If you need information about a burial or interment, photos, transcripts, how to contact the cemetery or local authorities, please visit our selection of Genealogy Websites (see below).

If not found below, our Cemetery List for Spindale covers a larger area, with the cemeteries listed in alphabetical order.

The following cemeteries are listed based on their distance from Spindale, with the one closest to Spindale listed first.

Nearby Communities in 1895 ...

We've built the following list with information that came from an Atlas published by Rand McNally in 1895. The Atlas had details such as the population of the community (which appears to have come from the 1890 Census) and whether there was a post office and/or railroad service available. We also indicate if the community no longer exists and is now historic.<6>

While we didn't find Spindale in the Atlas, the following 1895 communities would have been found near the current location of Spindale.

These communities are listed based on their distance from Spindale, with the one closest to Spindale listed first.

  • Rutherfordton
    (2 miles [3.2 km] to the west)
  • Forest City
    (3 miles [4.8 km] to the southeast)
  • Bostic
    (4 miles [6.4 km] to the east)
    • Note: The GPS coordinates that we are using for Bostic have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bostic
    • Bostic is located in Rutherford County
    • Population from the 2020 Census: 379 people
    • Jump to TripAdvisor's Tourism page for Bostic <2>
  • Mack ‑ Historic
    (4 miles [6.4 km] to the west)
    • Note: The GPS coordinates that we are using for Mack have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Mack
    • Mack is located in Rutherford County
  • Washburn
    (6 miles [9.7 km] to the east)
    • Jump to our Gazetteer entry for Washburn
    • Washburn is located in Rutherford County
  • Green Hill
    (7 miles [11.3 km] to the northwest)
    • Note: The GPS coordinates that we are using for Green Hill have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Green Hill
    • Green Hill is located in Rutherford County
  • Sunshine
    (8 miles [12.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for Sunshine have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sunshine
    • Sunshine is located in Rutherford County
  • Ellenboro
    (9 miles [14.5 km] to the east)
    • Note: The GPS coordinates that we are using for Ellenboro have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Ellenboro
    • Ellenboro is located in Rutherford County
    • Population from the 2020 Census: 830 people
    • Jump to TripAdvisor's Tourism page for Ellenboro <2>
  • Cuba ‑ Historic
    (9 miles [14.5 km] to the northwest)
    • Note: The GPS coordinates that we are using for Cuba have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Cuba
    • Cuba is located in Rutherford County
  • Henrietta
    (10 miles [16.1 km] to the southeast)
    • Jump to our Gazetteer entry for Henrietta
    • Henrietta is located in Rutherford County
  • Trio ‑ Historic
    (10 miles [16.1 km] to the north)
    • Note: The GPS coordinates that we are using for Trio have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Trio
    • Trio is located in Rutherford County
  • Sandy Springs
    (11 miles [17.7 km] to the south)
    • Note: The GPS coordinates that we are using for Sandy Springs have been provided by the GNIS.<1> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Sandy Springs
    • Sandy Springs is located in Polk County
  • Continue List   (16 more) ...
    • Poplar Grove
      (11 miles [17.7 km] to the west)
      • Note: The GPS coordinates that we are using for Poplar Grove have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Poplar Grove
      • Poplar Grove is located in Polk County
    • Brooklyn
      (12 miles [19.3 km] to the south)
      • Note: The GPS coordinates that we are using for Brooklyn have been provided by the GNIS.<1> The coordinates still need to be verified.
      • Jump to our Gazetteer entry for Brooklyn
      • Brooklyn is located in Spartanburg County (SC)
    • Hollis
      (12 miles [19.3 km] to the northeast)
      • Jump to our Gazetteer entry for Hollis
      • Hollis is located in Rutherford County

We've also created an expanded list of communities that existed in the 1890's and were located in the area around Spindale. See our List of 1890's Communities around Spindale.

Unfortunately, we don't know of a website for Spindale. If you can help, please contact us through our Feedback Page.

The official website for Rutherford County: www.rutherfordcountync.gov/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<2>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.
<3>If we found a location and have questions about the accuracy of our information, we will simply say that the marker is 'in the vicinity'. We are not confident about the location and the position of our marker is only a rough guide. If we have too many doubts about the location, we will not include it in our database.
<4>Our distances are not driving distances, but are calculated as a 'straight-line' distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line from Point A (ie- Spindale) to Point B.Our distance measurements begin at a specific point in Spindale. The point we use is located at these GPS coordinates - Latitude: 35.3598, Longitude: -81.9230       In this case, the coordinates for Spindale have been provided by the Geographic Names Information System (GNIS).
<5>The Find-a-Grave website is an excellent research tool with information about a cemetery's location and interments. They also offer a forum for their members which can provide additional help. More information about Find-a-Grave can be found on their website: findagrave.com.
<6>We use the term 'Historic' broadly and it generally means that the community no longer exists. However, it can also mean that the community might still exist, but was significantly larger or had a more 'official' existence in the past than it does now. Unfortunately our sources of data have proven to be unreliable. If you can provide us with more specific information about Spindale, please let us know so that we can improve our accuracy.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 10 Mar 2024