|
TripAdvisor Links
Introduction ...
Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.
Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.
In addition, you'll find a link to the TripAdvisor Forum for Shelby. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.
All of this can be found on the TripAdvisor's Tourism page for Shelby.
The following list should help you find nearby communities that also have TripAdvisor pages.
List of Neighboring TripAdvisor Tourism Pages ...
Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Shelby - within 30 miles [48.3 km]<1>.
Our list sorts the communities in alphabetical order. There are 48 communities listed:
- Belmont
(28 miles [45.1 km] to the east)
- Bessemer City
(14 miles [22.5 km] to the east)
- Blacksburg
(11 miles [17.7 km] to the south)
- Boiling Springs
(7 miles [11.3 km] to the west)
- Boiling Springs
(30 miles [48.3 km] to the southwest)
- Bostic
(17 miles [27.4 km] to the west)
- Note: The GPS coordinates that we are using for Bostic have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Bostic
- Bostic is located in Rutherford County
- Population from the 2020 Census: 379 people
- Jump to TripAdvisor's Tourism page for Bostic <2>
- Bowling Green
(20 miles [32.2 km] to the southeast)
- Casar
(15 miles [24.1 km] to the north)
- Cherryville
(10 miles [16.1 km] to the northeast)
- Chesnee
(20 miles [32.2 km] to the southwest)
- Clifton
(26 miles [41.8 km] to the southwest)
- Clover
(21 miles [33.8 km] to the southeast)
- Converse
(26 miles [41.8 km] to the southwest)
- Cowpens
(24 miles [38.6 km] to the southwest)
- Cramerton
(26 miles [41.8 km] to the east)
- Note: The GPS coordinates that we are using for Cramerton have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Cramerton
- Cramerton is located in Gaston County
- Population from the 2020 Census: 4,511 people
- Jump to TripAdvisor's Tourism page for Cramerton <2>
- Dallas
(20 miles [32.2 km] to the east)
- Note: The GPS coordinates that we are using for Dallas have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Dallas
- Dallas is located in Gaston County
- Population from the 2020 Census: 4,851 people
- Jump to TripAdvisor's Tourism page for Dallas <2>
- Drayton
(30 miles [48.3 km] to the southwest)
- Ellenboro
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Ellenboro have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Ellenboro
- Ellenboro is located in Rutherford County
- Population from the 2020 Census: 830 people
- Jump to TripAdvisor's Tourism page for Ellenboro <2>
- Fallston
(9 miles [14.5 km] to the north)
- Note: The GPS coordinates that we are using for Fallston have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Fallston
- Fallston is located in Cleveland County
- Population from the 2020 Census: 610 people
- Jump to TripAdvisor's Tourism page for Fallston <2>
- Fingerville
(28 miles [45.1 km] to the southwest)
- Forest City
(18 miles [29 km] to the west)
- Gaffney
(16 miles [25.7 km] to the south)
- Gastonia
(20 miles [32.2 km] to the east)
- Glendale
(29 miles [46.7 km] to the southwest)
- Grover
(9 miles [14.5 km] to the southeast)
- Hickory Grove
(22 miles [35.4 km] to the south)
- Hildebran
(30 miles [48.3 km] to the north)
- Note: The GPS coordinates that we are using for Hildebran have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Hildebran
- Hildebran is located in Burke County
- Population from the 2020 Census: 2,006 people
- Jump to TripAdvisor's Tourism page for Hildebran <2>
- Icard
(30 miles [48.3 km] to the north)
- Kings Creek
(16 miles [25.7 km] to the south)
- Kings Mountain
(11 miles [17.7 km] to the east)
- Lake Wylie
(30 miles [48.3 km] to the southeast)
- Lawndale
(8 miles [12.9 km] to the north)
- Note: The GPS coordinates that we are using for Lawndale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lawndale
- Lawndale is located in Cleveland County
- Population from the 2020 Census: 589 people
- Jump to TripAdvisor's Tourism page for Lawndale <2>
- Lincolnton
(20 miles [32.2 km] to the northeast)
- Lowell
(24 miles [38.6 km] to the east)
- Note: The GPS coordinates that we are using for Lowell have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lowell
- Lowell is located in Gaston County
- Population from the 2020 Census: 3,744 people
- Jump to TripAdvisor's Tourism page for Lowell <2>
- Maiden
(27 miles [43.5 km] to the northeast)
- Note: The GPS coordinates that we are using for Maiden have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Maiden
- Maiden is located in Catawba County
- Population from the 2020 Census: 3,421 people
- Jump to TripAdvisor's Tourism page for Maiden <2>
- Mayo
(22 miles [35.4 km] to the southwest)
- McAdenville
(26 miles [41.8 km] to the east)
- Mount Holly
(29 miles [46.7 km] to the east)
- Note: The GPS coordinates that we are using for Mount Holly have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Mount Holly
- Mount Holly is located in Gaston County
- Population from the 2020 Census: 16,415 people
- Jump to TripAdvisor's Tourism page for Mount Holly <2>
- Pacolet Mills
(28 miles [45.1 km] to the southwest)
- Pacolet
(29 miles [46.7 km] to the southwest)
- Rutherfordton
(24 miles [38.6 km] to the west)
- Sharon
(26 miles [41.8 km] to the southeast)
- Smyrna
(18 miles [29 km] to the southeast)
- Spindale
(22 miles [35.4 km] to the west)
- Note: The GPS coordinates that we are using for Spindale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Spindale
- Spindale is located in Rutherford County
- Population from the 2020 Census: 4,175 people
- Jump to TripAdvisor's Tourism page for Spindale <2>
- Stanley
(25 miles [40.2 km] to the east)
- Union Mills
(27 miles [43.5 km] to the northwest)
- Vale
(18 miles [29 km] to the northeast)
- Note: The GPS coordinates that we are using for Vale have been provided by the GNIS.<3> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Vale
- Vale is located in Lincoln County
- Jump to TripAdvisor's Tourism page for Vale <2>
- York
(26 miles [41.8 km] to the southeast)
Off-the-Road Links ...
The official website for Shelby: www.cityofshelby.com/ The official website for Cleveland County: www.clevelandcounty.com/ The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores things like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Shelby) to Point B.Our distance measurements begin at a specific point in Shelby. The point we use is located at these GPS coordinates - Latitude: 35.2919, Longitude: -81.5403 |
<2> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<3> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
|
|