Around Saint Pauls ...
For comparison, Saint Pauls has a population of 2,300 people.
Below is a sample of nearby communities based on their distance from Saint Pauls, with the nearest first.
- Rex
(5 miles [8 km] to the northwest)
- Parkton
(6 miles [9.7 km] to the north)
- Note: The GPS coordinates that we are using for Parkton have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Parkton
- Parkton is located in Robeson County
- Population from the 2020 Census: 430 people
- Jump to TripAdvisor's Tourism page for Parkton <3>
- Rennert
(6 miles [9.7 km] to the west)
- Note: The GPS coordinates that we are using for Rennert have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Rennert
- Rennert is located in Robeson County
- Population from the 2020 Census: 373 people
- Saddletree
(7 miles [11.3 km] to the southwest)
- Barker Ten Mile
(8 miles [12.9 km] to the south)
- Note: The GPS coordinates that we are using for Barker Ten Mile have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Barker Ten Mile
- Barker Ten Mile is located in Robeson County
- Lumber Bridge
(8 miles [12.9 km] to the northwest)
- Note: The GPS coordinates that we are using for Lumber Bridge have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Lumber Bridge
- Lumber Bridge is located in Robeson County
- Population from the 2020 Census: 87 people
- Shannon
(9 miles [14.5 km] to the west)
- Ardulusa
(11 miles [17.7 km] to the north)
- Hope Mills
(11 miles [17.7 km] to the north)
- Continue List (6 more) ...
- Philadelphus
(11 miles [17.7 km] to the west)
- Tar Heel
(11 miles [17.7 km] to the southeast)
- Timberlake
(11 miles [17.7 km] to the north)
- Note: The GPS coordinates that we are using for Timberlake have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Timberlake
- Timberlake is located in Cumberland County
- Lumberton
(12 miles [19.3 km] to the south)
- Red Springs
(12 miles [19.3 km] to the west)
- Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
- Jump to our Gazetteer entry for Red Springs
- Red Springs is located in Robeson County
- Population from the 2020 Census: 3,237 people
- Jump to TripAdvisor's Tourism page for Red Springs <3>
- Cumberland
(13 miles [20.9 km] to the north)
For more communities neighboring Saint Pauls, please visit our County-by-County Page for Saint Pauls.
Robeson County ...
Saint Pauls is located in Robeson County<5>.
The following counties adjoin and form the boundaries of Robeson County: Bladen, Columbus, Cumberland, Hoke, Scotland, Dillon (SC) & Marlboro (SC).
Curious and Interesting Names Near Saint Pauls ...
It seems like there is always a nearby community with a name that seems interesting, maybe familiar or just catches our attention in some other way. We've collected some names which strike us as being curious or interesting. Our list can be found on the Tidbits & Trivia Page for Saint Pauls.
Airports Near Saint Pauls ...
When a trip includes a flight, we try to find an airport that best fits our travel plans.<6> To that purpose, we've assembled a list of that are relatively close to Saint Pauls and that information can be found on the Airports Page for Saint Pauls.
TripAdvisor Tourism Pages for Saint Pauls ...
Looking for more information about Saint Pauls? A good source is the TripAdvisor website and we always start with their TripAdvisor page for Saint Pauls. Their page will give you an overview and then additional links that will help you to find lodging, restaurants and attractions.
In addition to the TripAdvisor page for Saint Pauls, there are neighboring communities that also have TripAdvisor pages. A list of those communities can be found on our TripAdvisor Page for Saint Pauls.
Websites We Enjoy ...
When we're planning a trip, we like to check the following websites for sights, attractions and places to visit.
- For the State of North Carolina:
- TripAdvisor Links for:
- Also of Interest:
Off-the-Road Links ...
Unfortunately, we don't know of a website for Saint Pauls. If you can help, please contact us through our Feedback Page.
The official website for Robeson County: www.co.robeson.nc.us/
The official website for State of North Carolina: https://www.nc.gov/
Footnotes ...
<1> | Population counts have been provided by the U.S. Census Bureau. For more detail, please visit our Census Page for Saint Pauls. |
<2> | The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required. |
<3> | While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program. |
<4> | An 'estimated' location is one where we have been given GPS coordinates, but are unable to verify the accuracy of those coordinates. That said, we have some confidence that we have placed the marker near the actual location. A typical reason for being unable to verify a location is that it might be on private property or maybe historic and gone without an obvious trace. |
<5> | If you're interested in how the shape of North Carolina's counties, including Robeson, have changed over time, we recommend the Atlas of Historical County Boundaries. |
<6> | When we are planning a trip (for example, to Saint Pauls), we usually look for the obvious: the choice of airlines that fly into the airport, the number of flights, the connections we have to make, which car rentals are available, etc. We also look for sights and attractions that we might find between any given airport and our destination - we do love exploring. We're willing to fly into a more distant airport if we can get the services and amenities that we like. Even though our choice of airport might be inconvenient to others, it usually gives us a better trip. |