RoadsideThoughts
A Gazetteer for the United States and Canada
Home >> State of North Carolina >> Robeson County >> Parkton >> TripAdvisor LinksIndex...










Learn About
The Commemorative
Quarter for
North Carolina


The Commemorative Quarter for North Carolina







TripAdvisor Links

Introduction ...

Whether we're planning a trip and want to make reservations or still at home and looking for a place to eat, we usually start by visiting the TripAdvisor website. Once on their website we search for what's available, then check the recommendations and experiences of other people.

Although there are many ways of searching the TripAdvisor website, we prefer to start with the TripAdvisor Tourism page. On the Tourism page you'll find a quick overview of the community, with links to restaurants, lodging, flights, rentals and nearby attractions.

In addition, you'll find a link to the TripAdvisor Forum for Parkton. If you have a question about your travel plans, post it on their Forum and see if others can give you an answer.

All of this can be found on the TripAdvisor's Tourism page for Parkton.

The following list should help you find nearby communities that also have TripAdvisor pages.

List of Neighboring TripAdvisor Tourism Pages ...

Below is a list of those communities which have a TripAdvisor Tourism page and are relatively close to Parkton - within 29 miles [46.7 km]<1>.

Our list sorts the communities in alphabetical order. There are 32 communities listed:

  • Aberdeen
    (28 miles [45.1 km] to the northwest)
    • Note: The GPS coordinates that we are using for Aberdeen have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Aberdeen
    • Aberdeen is located in Moore County
    • Population from the 2020 Census: 8,339 people
    • Jump to TripAdvisor's Tourism page for Aberdeen <3>
  • Bladenboro
    (27 miles [43.5 km] to the southeast)
    • Note: The GPS coordinates that we are using for Bladenboro have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bladenboro
    • Bladenboro is located in Bladen County
    • Population from the 2020 Census: 1,697 people
    • Jump to TripAdvisor's Tourism page for Bladenboro <3>
  • Bonnie Doone
    (13 miles [20.9 km] to the north)
    • Note: The GPS coordinates that we are using for Bonnie Doone have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Bonnie Doone
    • Bonnie Doone is located in Cumberland County
    • Jump to TripAdvisor's Tourism page for Bonnie Doone <3>
  • Cumberland
    (7 miles [11.3 km] to the north)
  • East Fayetteville
    (13 miles [20.9 km] to the northeast)
    • Note: The GPS coordinates that we are using for East Fayetteville have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for East Fayetteville
    • East Fayetteville is located in Cumberland County
    • Jump to TripAdvisor's Tourism page for East Fayetteville <3>
  • Elizabethtown
    (29 miles [46.7 km] to the southeast)
    • Note: The GPS coordinates that we are using for Elizabethtown have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Elizabethtown
    • Elizabethtown is located in Bladen County
    • Population from the 2020 Census: 3,378 people
    • Jump to TripAdvisor's Tourism page for Elizabethtown <3>
  • Fairmont
    (28 miles [45.1 km] to the south)
  • Fayetteville
    (12 miles [19.3 km] to the northeast)
  • Fort Bragg
    (16 miles [25.7 km] to the north)
  • Godwin
    (28 miles [45.1 km] to the northeast)
  • Hope Mills
    (5 miles [8 km] to the northeast)
    • Note: The GPS coordinates that we are using for Hope Mills have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Hope Mills
    • Hope Mills is located in Cumberland County
    • Population from the 2020 Census: 15,848 people
    • Jump to TripAdvisor's Tourism page for Hope Mills <3>
  • Laurinburg
    (28 miles [45.1 km] to the west)
    • Note: The GPS coordinates that we are using for Laurinburg have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Laurinburg
    • Laurinburg is located in Scotland County
    • Population from the 2020 Census: 14,896 people
    • Jump to TripAdvisor's Tourism page for Laurinburg <3>
  • Linden
    (28 miles [45.1 km] to the northeast)
  • Lumberton
    (19 miles [30.6 km] to the south)
    • Note: The GPS coordinates that we are using for Lumberton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Lumberton
    • Lumberton is located in Robeson County
    • Population from the 2020 Census: 20,239 people
    • Jump to TripAdvisor's Tourism page for Lumberton <3>
  • Maxton
    (22 miles [35.4 km] to the southwest)
    • Note: The GPS coordinates that we are using for Maxton have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Maxton
    • Maxton is located in Robeson County
    • Population from the 2020 Census: 2,332 people
    • Jump to TripAdvisor's Tourism page for Maxton <3>
  • Pembroke
    (18 miles [29 km] to the southwest)
    • Note: The GPS coordinates that we are using for Pembroke have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Pembroke
    • Pembroke is located in Robeson County
    • Population from the 2020 Census: 2,942 people
    • Jump to TripAdvisor's Tourism page for Pembroke <3>
  • Pinebluff
    (29 miles [46.7 km] to the northwest)
  • Raeford
    (13 miles [20.9 km] to the northwest)
    • Note: The GPS coordinates that we are using for Raeford have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Raeford
    • Raeford is located in Hoke County
    • Population from the 2020 Census: 4,956 people
    • Jump to TripAdvisor's Tourism page for Raeford <3>
  • Red Springs
    (11 miles [17.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Red Springs have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Red Springs
    • Red Springs is located in Robeson County
    • Population from the 2020 Census: 3,237 people
    • Jump to TripAdvisor's Tourism page for Red Springs <3>
  • Roseboro
    (28 miles [45.1 km] to the east)
  • Rowland
    (29 miles [46.7 km] to the southwest)
    • Note: The GPS coordinates that we are using for Rowland have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Rowland
    • Rowland is located in Robeson County
    • Population from the 2020 Census: 985 people
    • Jump to TripAdvisor's Tourism page for Rowland <3>
  • Saint Pauls
    (6 miles [9.7 km] to the south)
  • Salemburg
    (29 miles [46.7 km] to the east)
  • Southern Pines
    (29 miles [46.7 km] to the northwest)
    • Note: The GPS coordinates that we are using for Southern Pines have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Southern Pines
    • Southern Pines is located in Moore County
    • Population from the 2020 Census: 15,070 people
    • Jump to TripAdvisor's Tourism page for Southern Pines <3>
  • Spring Lake
    (18 miles [29 km] to the north)
    • Note: The GPS coordinates that we are using for Spring Lake have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Spring Lake
    • Spring Lake is located in Cumberland County
    • Population from the 2020 Census: 11,980 people
    • Jump to TripAdvisor's Tourism page for Spring Lake <3>
  • Stedman
    (19 miles [30.6 km] to the northeast)
  • Stoney Point
    (5 miles [8 km] to the north)
    • Note: The GPS coordinates that we are using for Stoney Point have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Stoney Point
    • Stoney Point is located in Cumberland County
    • Jump to TripAdvisor's Tourism page for Stoney Point <3>
  • Tar Heel
    (17 miles [27.4 km] to the southeast)
    • Note: The GPS coordinates that we are using for Tar Heel have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Tar Heel
    • Tar Heel is located in Bladen County
    • Population from the 2020 Census: 115 people
    • Jump to TripAdvisor's Tourism page for Tar Heel <3>
  • Vass
    (28 miles [45.1 km] to the northwest)
  • Wade
    (23 miles [37 km] to the northeast)
    • Jump to our Gazetteer entry for Wade
    • Wade is located in Cumberland County
    • Population from the 2020 Census: 588 people
    • Jump to TripAdvisor's Tourism page for Wade <3>
  • Wagram
    (20 miles [32.2 km] to the west)
    • Note: The GPS coordinates that we are using for Wagram have been provided by the GNIS.<2> The coordinates still need to be verified.
    • Jump to our Gazetteer entry for Wagram
    • Wagram is located in Scotland County
    • Population from the 2020 Census: 772 people
    • Jump to TripAdvisor's Tourism page for Wagram <3>
  • White Oak
    (20 miles [32.2 km] to the southeast)

Unfortunately, we don't know of an official website for Parkton. If you can help, please contact us through our Feedback Page.

The official website for Robeson County: www.co.robeson.nc.us/

The official website for State of North Carolina: https://www.nc.gov/

Footnotes ...

<1>Our distances are not driving distances, but are calculated as a 'straight-line' (or point-to-point) distance. A straight line distance ignores obstructions like rivers, canyons, lakes, et cetera - it's truly a line drawn from Point A (ie- Parkton) to Point B.Our distance measurements begin at a specific point in Parkton. The point we use is located at these GPS coordinates - Latitude: 34.9026, Longitude: -79.0100       In this case, the coordinates for Parkton have been provided by the Geographic Names Information System (GNIS).
<2>The location has been supplied by the Geographic Names Information System - which is maintained by the U.S. Geological Survey (USGS). While these values should be definitive, we found that accuracy can vary and you should double-check the location if accuracy is required.
<3>While we're fans and frequent users of TripAdvisor, you should know that we're also members of the TripAdvisor affiliate program.









 

Copyright 2024
All Rights Reserved

Thank you for visiting our website.

In closing, please keep in mind that we can not guarantee the accuracy or timeliness of the information on this website, so use with care. We encourage you to double-check the information that is critical to you.

If you've found an error or have additional information that you would like to share, please don't hesitate to write: Click here to contact us.

This page was last modified/updated: 07 Apr 2024